CONSTRUCTION OF VOCATIONAL LABS IN KENDRIYA VIDYALAYA NO 01 UNDER THE AOR OF GE DEVLALI

Amount

Architecture services:- Preparation of complete conceptual plans, architecture drawing ( Elevation, section and schedule of finishes) and site plan. the drawing will cover details working drawing with ref to technical, architecture and functional requiredment in soft and hard copy. Space/Area analyisis in tubular graphiccal formet structure services- structure design and drg duly incorporated with all the details, final submission of all approved struture drg with supported by relevant design data( STAAD) IN ALL SIZE IN HARD& SOFT COPY in desired configuration. rroof checking & vetting form Govt Engr collage and submitted of all structure drg as per latest IS Code & practies details Estimate_ Preparation of details & Yard stick for all the bldg as per the approved architecture, structure drgas per MES SSR 2020 pattern along with Rate analiysis Note :- After submission of apprval architecture/structre design work will execute at site.

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.

Ditto all as per Item No 2 above but depth exc 1.50m and n.exc 3.0m in soft / loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material n, exc 50m and depositing where directed at a level n exc 1.5m from the base.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area.

Treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for hardcore of broken or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.

M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L RCC M-25 (Design Mix) Concrete as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed.

M&L RCC M-25 (Design Mix) Beams, Cantilivers, bressummers, lintels over 1.5m span

M&L M-25 (Design mix) Columns, Pillars, Piers, Posts and Struts

M&L for fly ash brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as directed.

M&L for fly ash brick sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, one or more rebates including necessary fixing lugs, 06nos 100mm size stainless steel hinges (03 nos for each shutter), lock strike plate etc complete all as directed.

S&F 2nd class hardwood 30mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S & F 20mm thickh 2nd class hard wood chak board both sie plan with nails in any situation etc complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S & F 100 mm long Butt hinges, cast brass, with Stainless steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.

S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete and directed.

Supply and fix hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size.

S&F brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc complete all as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.

S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Ditto but 6mm to 8mm dia on roof slab complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F 4.00 mm thick sheet glass pin headed tupe fixed in window /ventillators etc complete all as directed.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately.

Supply only water proofing compund as specified and directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in subbase complete all as directed.

M & L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as floor all as per direted

M & L Vitrified ceramic tiles (Double charged) 8 to 9mm thick (square/rectangular) area of each tile exceeding 0.36 sqm n' exc .42, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as above but in skirting over 8 to 9mm thick backing coat in CM 1:4 complete all as specified and directed

M&L PCC 1:2:4 type B2 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection etc complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed.

M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol.

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed

M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as directed.

M & L Preparation of new wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth appling two coat of syntheti enamal paint over a coat of pink primer omplete all as per speifie.

M & L for glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick with and including 10mm thick CM 1:6 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed base (1:6) including rubbing and polishing complete all as specified.

M & L for 15 mm thick Artificial Granite (of any type and colour ) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, or laid in floor etc complete all as specified and as directed.

All as per item No above but 20mm bore pipe all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed

S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.MAKE : NIRALI/IDIAMOND

S & F 32mm bore waste fittings, brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S & F in repair 32mm dia PVC flush/waste pipe of polyethylene of low or high density or PVC for low level flushing cistern/basins/sink complete as specified and as directed.

S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed.

S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed.

S&F 75mm bore PVC (SWR) bends any radius with access door etc complete all as directed.

S&F PVC trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation concrete and mass concrete of manholes etc complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed.

M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed.

M & L 150mm dia pipe Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

M&L Surface excavation as in Hard /dense soil not exc. 30 cm deep and averging 15 cm deep and getting out all as specified and directed by Engineer-in-charge.

Removing excavated material exc. 250 m but n exc. 500 m & depositing where directed at a level not exceeding 1.5m above the starting point.

M&L hard core of gauge n exc 63mm, broken stone boulders deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface broken stone or boulders.

M&L providing cement concrete (1:4:8) type D2 using 40mm graded agg in foundation filling & mass concrete

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade complete all as specified and directed.

M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed.

Providing cement concrete Type B0 1:2:4 (12.50mm aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and laying reinforced concrete drain pipes class NP-2, 150mm bore, laid in trenches and jointed complete with collars etc complete all as specified and directed by Engineer-in-Charge.

M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed (100 mm thick ) to drain pipes including including packing under, and hunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLSH, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point (Ceiling, wall and Exhaust) controlled by one switch

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No above here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

Modular type switch, 1 way,6 Amps, 1 module

Modular type socket, 2 & 3 pin combined, 6 Amps, 2 module

Modular type switch, 1 way, 16 Amps, 1 module

Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module

Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

Supply and fix sheet metal enclosure double door 12 way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed. Make : L&T/ Legrad/ Semens

Supply and fix MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

Supply and fix MCB SPN 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect.

Supply and fixing ceiling fan complete with blade , down rods, electronic regulator and accessories 230 V ,1200 mm sweep, min air delivery 210 CFM with service value 6.0 BEE, five star rated with brushless direct current motor.( BLDC)

S&F Exhaust fan metal body, 450 mm sweep single phase, 230 volt.,heavy duty.all as specified and directed Make :- Orient or equivalent make approved by Engineer in charge

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanised earth lead wire 4.0 mm dia by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil/stata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and indicated including testing on completion NOTE: 1.The unit rate includes earth strip/GI lead wire and protection pipe upto (maximum 7.5 metre) from earth plate to earth point/test point. 2. unit rate includes the rate of excavation and earth work.

Supply, Laying , jointing and testing of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable ISI marked, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of following sizes:-

2 core 10 sqmm

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Supply & lay in trenches double walled corugated HDPE pipe 50 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

Supply and fix sheet metal enclosure single door 2 way DBs SPN, 240V without bus bars complete all as specified and as directed. Make : L&T/ Legrad/ Semens

Material and laying for Tubes medium grade, galvanised, with all fittings laid in trenches of size 25 mm outer dia all as specified and directed

Material and laying for Tubes medium grade, galvanised, with all fittings laid in walls /ceilings/ floors etc of size 25 mm outer dia all as specified and directed

Material and fixing for gun metal Gate valve 25 mm dia all as specified and directed

Cutting of existing GI tubing of 50/ 40 mm dia and insertion of Tee for taping of GI pipe 25 mm dia all as specified and directed by Engineer in charge.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Note: Amount of sch of credit of Rs.NIL/-will be deducted from total amount of BOQ.

M/S SAMEER SUBHASH PATANI (BID ID -3171967)

MANOVANDANA CONSTRUCTION (BID ID -3173225)