Providing Additional Electrical arrangements in the newly constructed Marriage Hall

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point

Supply and fixing of 4' 20W LED fitting with LED on conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 4 feet 20W single Led fitting with Led tube complete with PolyCarbonate housing and PC removable cover (Higher end) with TW round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and fixing of 12W LED modular gate light with suitable GI pipe of lenght one feet on the Gate pillar with 1/2 feet in the pillar and 1/2 feet above pillar with PVC unsheathed copper leads from the Junction box control to gate light (Higher end)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 35W Low bay fitting with suitable hanging supports / necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp

Supply and fixing of 375mm (15") sweep (heavy duty) AC exhaust fan complete without provision of holes in the wall

Supply and fixing of 1nos.6/16A two module socket , 1 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

Supply and fixing of 20A Flushtype Wall Socket 32ADP MCB complete set forACPlug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only.

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.(63 Amps 4P MCB-1 No, 63 Amps4P,30mA RCCB/ELCB MCB Isolator-1 No 63 Amps DP Isolator-3 Nos, 6 Amps to 32 Amps SP MCB- 18 Nos)

Supply and fixing of 8 way MCCB Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 125A 4P MCCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. Copper wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 10 sq mm copper wire with painting of suitable colour.

Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed position.

Supply, Erection, Testing and commissioning of Three compartment LTCT meter box made up of 16 SWG CRCA sheet steel (Length 1200mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor / wall mounting support with supply and fixing of the following interior mounting arrangements with busbar chamber, meter chamber and Terminal box chamber confirming to IE rules. i.The busbar chamber will consist of 4 nos. 2" x 1/4" tinned copper flat for phase and neutral busbar on epoxy mounted bus insulated at proper and sufficient spacing between the bus bar as per IE Rules. ii.3 nos. 200/5A CT coil mounted in Three phase busbar. iii.Interconnection between CT coil to 4 way terminal box and 4 way terminal box to Meter box by 4 sq.mm PVC cu.wire. The LTCT meter box should be powder coat paint of approval colour, approved by site officer.

Supply , Erection Testing and commissioning of 415V/50 HZ 320A Cubicle Panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on either side of the panel board for earth buses , 3 nos. LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 320A 4P MCCB - 1no Outgoing 63A TP MCCB -12 nos. 100A TP MCCB -2 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 320A Cubicle Panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on either side of the panel board for earth buses , 3 nos. LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 315A TPN switch Disconnector Fuse Unit Interior only - 1no Outgoing 63A TP MCCB -4 nos. 1025A TP MCCB -4 nos.

Supply, installation, testing and commissioning of floor mounting indoor cubicle type automatic power factor control panel with 125A TPN MCCB as incomer of rating 40 kVAr, 440V, 3Ph, 50Hz housing MPP-H 440V Capacitors (combination of 2X10 +4X5 KVAr) in seven steps of switching sequence with all accessories and control wiring as required. (the panel shall have CPRI approval certificate)

Supply and installation conventional earthing system by digging a pit of size 300mm x 300mm x 300 mm and hammering 3 meter long GI earth electrode of 40mm dia with funnelling arrangements and salt, charcoal mixture as per IS: 3043 and self coupling bore & peg arrangement in the ground . The terminal of the earth electrode inside the Manhole shall be provided with universal clamp for terminating cable/flat. SFRC manhole cover on the chamber shall be identified as earth pit with yellow paint as required as approved by the consultant. The earth resisitance achieved shall be less tha 1 ohm

Supply and installation of 300mmx300mmx3.15mm cu plate electrode earth station conforming to IS:3043-1987 / NEC / IEE complete with brick masonry chamber, Heavy duty SFRC cover/RCC slab, SFRC frame ,GI class 'B' watering pipe of 50 mm dia with funnel having 20G GI wire mesh etc, The heavy duty SFRC manhole cover with frame shall be painted with bitumastic paint, identification of earthpit with yellow paint below the chamber cover, mixtures of charcoal & common salt around electrode including digging of pit up to permanent moisture level but not less than 2.5 meter depth and back filling.(For Generator Body & Neutral)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125 mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 6mm copper flat with necessary clamps/screws supports on wall/floor/ground for earth connection.

Supply and run of 25mm x 3mm copper flat with necessary clamps/screws supports on wall/floor for earth connection.

Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and providing cable end termination of 3-1/2x95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only.

Supply and run of 3 of 4 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75m and refilling the earth to make good condition.

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Supply and Run of 25mm. PVC rigid pipe concealed in wallon wall and ceiling and making good of the concealed position. (for future LAN and other wiring)

Sub total

S J INFRA (BID ID -1402378)