SUPPLY, INSTALLATION AND COMMISSIONING OF VACUUM PUMP 300 LPM, 0.75 HP, 3 PHASE FOR 1000 LPH TRANSFORMER OIL CIRCULATION PLANT (SHAFT DRIVE ONLY ALLOWED)

(i) Offers from OEM/authorized dealer for vacuum pump or successful suppliers of spares for transformer oil filtration plant only will be considered. (ii) Bidders should attach Authorised dealership certificate OR tender Specific authorization certificate from OEM, without which their offer will be summarily rejected. (iii) The tenderer should attach/submit their credentials for the same item, which was supplied either to this Railway or other zonal railways by way of R.Note/CRN only. (Please refer para 3.4 of Part-B of Sr tender conditions for Procurement from (OEMs) manufacturers or authorized agent / dealers) (iv) While uploading Authorised dealership certificate OR tender Specific authorization certificate from OEM, Bidders should ensure that the documents should have the mobile number and e-mail address of the authorized signatory in order to ensure the genuineness of the certificate or otherwise offer will be summarily rejected.

Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or, if from such a country,has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."

HSN CODE 8607 and SOUTHERN RAILWAY / TAMILNADU GST NO. 33AAAGM0289CIZQ - (i) Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. ii) a) The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. b) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the b i d d e r. c) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. d) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order. e) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

MSE firms should submit a copy of valid MSE Certificate at the time of submission of their bid. (As the validity of Udyog Aadhar Memorandum was up to 30.06.2022 it is not considered as a valid document for availing MSE preference).

Deviations: Technical/Commercial deviations if any should be recorded in the Techno - Commercial Tabulation field itself. If it is attached in the Annexure or as attachments, the same are liable to be ignored

GST : As per Section 171 of GST Act 2017, as a remedy against anti-profiteering, INPUT TAX credit benefit if any accrued should be passed on to the Purchaser as reduction in Basic Price, or else the following certificate should accompany the bill: It is certified that no INPUT TAX credit benefit has accrued on materials invoiced/billed for, that can be passed on to Purchaser. (B) Firm should submit the Invoice/Bill clearly indicating the appropriate HSN and applicable GST rate thereon duly supported with documentary evidence. (C) Firm should also give a declaration that any additional. Input Tax Credit benefit, if become available to supplier, the same shall be passed on to the purchaser without any undue delay. [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/ their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned Tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC

Inspection by consignee after receipt.

1). If contract value happens to be higher than 5 lakh, then inspection will be by TPI Agency. 2). Tenderers may refer Annexure - 13 of SR Tender conditions. 3). Firm to please mention the place of inspection with full address and pin code. 4). Selection of Inspection Agency is governed by Railway Board Letter No. 2022/RS(G)/779/8 Dated: 04.01.2023.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous item s. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Delivery Terms : FOR Destination.

Mode of Despatch : By Road/Rail

In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.

Ambiguous offer will be summarily rejected. Terms of offer must be specific and unambiguous.

Offer validity should be minimum 60 days.