CA NO CE CHZ CHM T 04 2025 26 PROVN OF UG WATER STORAGE TANK WITH PUMP HOUSE AT SUBATHU MIL STN

Total amount of Sch 'A' Sec- II (SITE DEVELOPEMENT & MISC. EARTH WORKS) Lump sum price worked out by the contractor for "SITE DEVELOPEMENT & MISC. EARTH WORKS" as listed in schedule 'A' Part-II

Total amount of Sch 'A' Sec- III (INTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION WORK " as listed in schedule 'A' Part-III

Total amount of Sch 'A' Sec-IV (SEWAGE DISPOSAL WORKS) Lump sum price worked out by the contractor for "SEWAGE DISPOSAL WORKS" as listed in schedule 'A' Part-IV

Total amount of Sch 'A' Sec- V (PATH, CULVERTS AND HARDSTANDING WORKS) Lump sum price worked out by the contractor for "PATH, CULVERTS AND HARDSTANDING WORKS" as listed in schedule 'A' Part-V

Total amount of Sch 'A' Sec- VI (AREA DRAINAGE WORKS) Lump sum price worked out by the contractor for "AREA DRAINAGE WORKS" as listed in schedule 'A' Part-VI

Total amount of Sch 'A' Sec- VII (FENCING WORKS) Lump sum price worked out by the contractor for "FENCING WORK" as listed in schedule 'A' Part-VII

Total amount of Sch 'A' Sec- VIII (PROTECTIVE WORKS) Lump sum price worked out by the contractor for "PROTECTIVE WORKS" as listed in schedule 'A' Part-VIII

Total amount of Sch 'A' Sec-IX (EXTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY WORKS" as listed in schedule 'A' Part-IX

Total amount of Sch 'A' Sec - X (DEMOLITION WORKS) Lump sum price worked out by the contractor for "DEMOLITION WORKS" as listed in schedule 'A' Part-X.

DEMOLITION/DISMANTLING WORKS Taking up or down old unserviceable GI tubing and connections,

SITE DEVELOPEMENT & MISC. EARTH WORKS Forming embankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc 1.5 m high from base complete all as specified and directed.

INTERNAL ELECTRIFICATION WORKS Concealed point wiring using approved colour coding as per IS, with 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H, drawn through and including heavy duty PVC conduit of appropriate dia (2mm wall thickness) and conduit accessories ISI marked, PVC junction boxes etc, concealed in walls/ceiling/floors including 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H as earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light/fan point (Ceiling/ Wall/ Exhaust) controlled by one number one way switch or one number one way switch and regulator

One 5/6 Amps socket outlet on independent board

One 5/6 Amps socket outlet on the same board with other switches

All as per Srl item No 23.00 above but 100 mm dia.

of size 80mm dia medium grade from enroute the proposed site of SWT complete all as specified & directed. Note:- (a) Excavation & earth work will be measured and paid seperatly. (b) Retreived quantity will be contractor property under schedule of credit

4 Core 50 Sqmm

Unreinforced precast concrete cable cover, ISI Marked IS-5820 (Latest Edition), class LV, Type 1, flat, size 250mm x 150mm x 40mm for protection of LT cable complete all as specified and as directed.

(E) ACOUSTIC ENCLOSURE : Provision of an integral type approved/certified acoustic enclosure weather proof, water proof and corrosion free, as per lattest CPCB norms IV or latest, for the DG Sets to restrict the noise level to 75 db at one meter distance and temp rise within canopy shall not exceed 50 - 70 degree C. It shall be made of 14 SWG CRCA MS Sheet with powder coated finish on outside and provided with non igniting fire retardant foam as acoustic material. There shall be four hinged doors out of which one shall be with a glass window. The base shall be of ISMB section all as directed and shall include as under:- (i) Silencer shall be absorption type, non resistance, residential and exhaust pipe covered with rock wool insulation with aluminium cladding extending to about 2 meters outside the acoustic enclosures. (ii) Internal wiring with PVC copper conductor cables, IS - 694 marked, FRLSH in conduit and fluorescent lamp fittings. (iii) Fuel tank of 8 hours capacity made out of 14 SWG CRCA MS sheet, duly powder coated and provided with float, gauge and fuel float switch-01 Set (iv) Foundation of DG Set shall be as recommended by OEM and as directed by Engr-in-charge. Note: (i DG set shall be "pre-commissioned" by rep of AO within overall cost quoted. Fuel for "Pre-commissioned" test shall be arranged by contractor. (i) Suitable capacity battery maintenace free as per OEM recommendation shall be provided with in all cost.

Supply, installation, commissioning and testing Manufacturer or OEM (original equipment manufacture) Diesel Engine Driven Generating Set capable of delivering 58.5 KVA, 415 Volts (AC 3 Phase, 1500RPM 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG Set shall consist of a diesel engine flexible coupling coupled directly to matching alternator and mounted on metalastic foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms IV or latest and as specified) all as specified, directed complete with AMF control panel standardized by manufacturer, fuel tank with mounting arrangement and inlet, outlet return oil arrangement, suitable exhaust pipe complete and shall comprise and including the following :- (A) Engine (Prime Mover): The diesel engine totally enclosed, compression ignition, water cooled (radiator cooled) turbo-charged cooled suitable for Power generation application having minimum of suitable BHP capacity to drive the 58.5 KVA alternator at 1500 rpm under NTP condition conforming to BS 649, complete with all interconnecting piping and the following standard accessories. Suitable fly wheel, Flexible coupling, Air Cleane,. Radiator heavy duty type, Cooling fan, Water circulating pump, Corrosion resistor, PT Fuel pump, Electronic governing control (EGC), Fuel filter, Fuel shut down solenoid (24V DC), stop solenoid, Lubricating Oil filter, Oil cooler, By-pass filter, Silencer and Starter. (B) ALTERNATOR:- AC alternator copper wound, self excited, self regulated, self ven 58.5 KVA PF 0.8 1500 RPM insulation class 'H'. Enclosure IP 23 complete with AVR with + 0.5% voltage regulation, directly coupled to and match the above engine and alternator conforming to IS-4722. permissible over load 10% for 1 hour in 12 hour operation complete all as per IS-13364. (C) METALLASTIC Anti-vibration pads: for mounting engine, alternator assembly on the base frame/plate. (D) BASE PLATE : Base Plate shall be made out of structural steel as per manufacturer's recommended design/specifications.

Cutting & taking out of existing GI distribution pipe of size 80mm dia carefully enroute of proposed site of 100000 gln SWT and rerouting / relaying, jointing testing of the same in new route as directed by the Engineer-in -Charge all as specified incl all necessary fittings such as socket, nipple, bend, elbow, union, flange, nut, bolt, washer and rubber/ fiber gasket etc. complete all as specified & directed. Note:- Excavation & earth work will be measured and paid seperately.

Schedule 'A' Section-XII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.