REP/MAINT OF LT DISTR EXTN ELECTRIFICATION SYS INCL REPLACEMENT OF ACSR CONDUCTOR AND REPAIR/REPLACEMENT OF ELECTRIC FITTINGS AND FIXTURES INCLUDING REWIRING TO CERTAIN BLDG IN OTM AT NAMKUM AND KHOJATOLI AREA UNDER GE RANCHI

Amount

Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified and directed.

Description all as per item no.1 above but depth exceeding 1.5m and not exceeding 3.0m

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified.

S & F GI pipe light grade100 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts complete all as specified and as directed.

Taking out old/unsv/damaged PCC/steel pole complete with all accessories incl demolition of concrete with necessary excavation and earth work incl site clearance complete all as specified and directed.

Supply,installation and erection in true vertical or to be planted as strut steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 300mmx300mm at bottom duly welded and MS pole cap at top,poles made out of ERW MS tubing confirming to IS1161 part-II, type 410 SP -31(9.0m long) including drilling of holes of required size and nos for fixing of cross arms/clamps, painting with one coat of red oxide primer and two coats of aluminum paint for expose surface and two coats of black bituminous paint for portion embedded in concrete, painting three black/white bands at lower portion of pole each of 300mm height at 300mm spacing, painting pole no. with black paint on a yellow circle background at suitable height complete all as specified and directed Make: National tubing co./C&S Electric/Bansal/Jindal

Description all as per item no.9 above but 410 SP-55(11.0 mtr long) complete with MS base plate of size 300x300 , 6mm thick on the bottom ,welded at the centre with a through hole of 14 mm dia at a height of 300mm above the planting depth complete all as directed Make: National tubing co./C&S Electric/Bansal/Jindal

Plain cement concrete 1:4:8 type D2(Using 40mm graded crushed stone agg) as in foundation of poles and mass concrete complete all as specified and directed.

cement concrete 1:3:6 type C2((Using 40mm graded crushed stone agg) as in foundation of stays and coping around poles complete all as specified and directed.

M&L for Cross arms bracings, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paint complete all as specified and directed.

M & L for GI wire 4.00 mm dia as earth wire for continous run on HT/LT overhead line, stretching and fixed to HT/LT pole, connecting to earth terminal complete all as specified and directed.

M & L for shackle type porcelian vitreous white ,brown or green insulator including galvanised mild steel straps washers,insulator bolts,washers and nuts of size 100 mm height and 115mm dia for 1100 volts grade complete incl taking down old/unsv insulator any type

M & L taking down old/unsv and new Stay assembly set complete using 230x230x6mm thick, stay plate and 16 mm dia rod,180 cm long with all accessories as shown in electrical plate no.1( Loop type insulator,stay clamps,excavation and concrete measured seperately)

M & L for loop type insulator,vitreous porcelain white brown or green with overall dimension of 65x90mm,clearance of hole 16mm complete all as specified and directed.

Danger notice plate 20x15 cm and 1.6mm thick mild steel sheet vitreous enamelled white with letter,figure and conventional skull and bones in signal red colour and fixed with MS clamp bolts/ nuts of approved size for LT 1100 VOLT complete all as specified and directed.

Description all as per item no.16 above but for HT,25x20cm size

M& L for pin type ,porcelain,vitreous white brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut 150mm height,150mm dia for 11000 volts grade, complete all as specified and directed. Make: Jaipuriya/Rashtriya

Restretching of LT/HT overhead line ACSR conductor using lifter and binding with insulator on HT/LT pole using binding wire complete all as specified and as directed by the Engineer-in-Charge. ( Note: Total Span length shall be considered for measurement of HT/LT pole not the individual conductor in each span i.e. span length = Runing metre).

S&F MCCB four pole 415 volts 50 Hz 630 amps of capacity 50 KA with thermal magnetic release complete with all accessories.Make :Havells/L&T/C&S

S&F MCCB four pole 415 volts 50 Hz 250 amps of capacity 25 KA with thermal magnetic release complete with all accessories.Make :Havells/L&T/C&S

S&F MCCB four pole 415 volts 50 Hz 400 amps of capacity 36 KA with thermal magnetic release complete with all accessories.Make :Havells/L&T/C&S

S&F MCCB four pole 415 volts 50 Hz 100 amps of capacity 25 KA with thermal magnetic releasecomplete with all accessories.Make :Havells/L&T/C&S

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 15mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I 1991.Note :(a)Three photos covering the steps involved in installation with the electrode plate be atttached witht the bills for payments. (b) The item should be connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and directed.

Taking down old unserviceable and Supply , installation testing and commisioning of LT MCCB Panel Board of suitable size cubical weather, dust and vermin proof fabricated out of CRCA sheet steel suitable size thicness complete, MCCB panel board should be manufactured and supplied by ISO 9001 certified OEM of MCCB. The Busbar system should be duly type tested at NABL lab for short time with stand current of 1 Sec. it should be suitable for wall or floor mounting with Double door option, Panel board enclouser should be robust contruction and corresion resistance powder coated with seven tank process with locking arrangement fixed on suitable size foundation 60 Cm above the GL by providing angle iron of size 50 x 50 x 6 mm welded on all the four corners embedded in PCC 1: 2: 4 using 20 mm graded stone aggregate up to 30 Cm including electrical connection with lugs & glands complete comprising the the following:- :

Aluminum busbar of high conductivity 1000Amps capacity 4 wire system - 01 set

MCCB , 630Amps , 35 KA, 04 Pole-01 Nos (Incoming) Make- Havells/L&T/Schnider

MCCB , 400Amps , 35 KA, 04 Pole-02 Nos (Outgoing)Make- Havells/L&T/Schnider

Onload changeover front operated 400 Amps, 04 Pole-01 Nos (outgoing)Make- Havells/L&T/Schnider

MCCB , 250Amps , 25 KA, 04 Pole-01 Nos (outgoing) Make- Havells/L&T/Schnider

Digital type panel mounted Voltmeter 0-500 volts.

Digital type panel mounted Ampr meter 0-500 Amps with CT's .

Three phase Indication lamp LED type, - 01 Set {Set of three Nos (RYB) }

Digital type frequecy meter ,50 Hz, panel mounted

Note: Photos of location wise-installation alongwith CA number, Name & contact number of JE (visibile 10cm letters) painted on the item to be att with the bills for payment. All Internal connection of MCCB from BUS Bar made By using copper busbar of rated Capacity

S&F Electric Resistance rubber floor mat sheet of size 12mm thick ISI marked for LT pannels of size 1X1.5mtrs black and equivalent colour as per direction, incl taking out old complete all as specified and directed.Location LT Panells at various location.

S&F Electric Resistance rubber floor mat sheet of size 16mm thick ISI marked for HT GOD and VCB's of size 1X1.5mtrs black and equivalent colour as per direction, incl taking out old complete all as specified and directed.Location HT GOD at various location.

S&F LED Post top / Gate light 1x40 watt decorative type, 360° indirect light including fixing with suitable size GI pipe as requir on the top of gate pillor, control by two way SP DB with Suitable MCBs as per direction and wiring complete all as specified & directed. Make :- CROMPTON / Phillips/Orient/Havells

S&F Garden Light/ Bollards 10W watt are made of extruded Aluminium, profiles with cast aluminium base,opal PC diffusers with integrated LED and driver complete all as specified and directed. Make:- CROMPTON / Phillips/Orient

S&F of cable Jointing kit for 11KV earthed grade cable for outdoor termination heat shrink type joint complete with all accessories suitable for 3 core XLPE armoured cable 95 sq mm .

S&F in replacement of LED Street light luminaries fittings 45 watt green line a road lighting luminaries with high power LED and unique peanut to ensure uniform light distribution higher spacing between poles and maintenance free system Note:- (i) The contractor shall produce minimum two years warrenty against any manufactures defect/ failure of fitting from the authorised representative / OEM of the make as specified and brought at site. (ii) The efficacy of system is 120 lumne/watt. (iii) The PF should be > 0.90 (iv) The LED street light fittings shall be provided with overload / under load protection with range 180 to 380 volts and inbuilt surge protection device. (v) CA No. to be endorsed in all light (vi) The contractor / manufacture shall provide on site warrantyshould be against failure of light for carrying out necessary repair / replacement of defective street light fittings. (vii) The LED fitting and driver in fitting shall be of same make.(viii) Street light should be with phase to phase and phase to neutral protection. Make: Havells / Phillips/Orient.

Dismantling exixting old and unserviceable security light brackets and Supply & Fixing Bracket made out of GI light grade pipe of 40/35 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 500 and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified & directed.

Supply and install HT 11 KV outdoor type gang operated air break switch suitable for horizontal or vertical mounting of rating up to 400 amps complete with operating rod GI 20mm dia and handle rubber insulated complete all as specified and as directed incl taking down old/unsv GOD air break switch .Make: Jaipuria/Rashtriya

M&L for chemical earthing Two B class IS mild steel pipe, one inside the other, hot dip galvanised with 100 micron coating outside and about 300 micron coaing inside filled with high conductive and corrosion Resistant Crystalline Mixture inside and Backfill compound around the outer electrode) outer electrode dia 76 to 80mm and inner electrode dia 37 to 40 mm both 10' long, incldg making earth pit of size 6' x 6' and 11' deep fill the entire pit with black cotton soil or normal soil, pour enough water so that pit is full with water leave it for three days so that soil soaks up the water the soil level has goes down again top up the pit with soil & fill the water. After two or three days when the pit is sturdy and ready for earthing purpose, install the earthing electrode as per installation method as below:- (a) Mix backfill compound evenly with soil. (b) Remove plastic sleeve carefully from electrode. (c) Place naked electrode at centre of pit. (d) Start refilling empty space around electrode with backfill compound in layers. (e) Pour some water and poke the pit with a long wooden rod to allow trapped air to escape. (f) Gradually continue refilling process till electrode is buried in the pit up to the green patch painted on the top portion of electrode. (g) Ensure that pit is not watery (h) Pack electrode with compound nicely and tightly, so that it stands firmly in pit. (j) Pour a few buckets of water around pit. (k) Pour a few buckets of water around in the pit everday for 10-15 days for system to set. (l) Connect the earth electrode with equipments by 32mm x 6mm copper strip. Photos of the installation of all stages to be att with the bills for payment. Note : (a) Earth resistance shll not be more than 1.5 Ohm. (b) Aluminium strip for connections shall be measured and paid separately.

S&F in replacement XLPE insulated screen, PVC badded galvanized steel strip on wire armoured electric, power cables heavy duty with aluminium conductor 11 KV/ 6.35 KV grade, earthed system cross sectional area 95 Sq mm X 3 core laid in trenches or passing through pipe or fixed to wall/poles complete all as specified and directed. (Make : Havells/Polycab/ Gloster/)

Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 50 Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed.(Make : Havells/Polycab/ Gloster/)

Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 70 Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed.(Make : (Make : Havells/Polycab/ Gloster)

39.Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 95 Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed.(Make : Havells/Polycab/ Gloster)

40.Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 150 Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed.(Make : Havells/Polycab/ Gloster)

M&L for identification of any underground cable fault using cable fault detector machine of depth upto 4 m followed by digging and exposing the faulty cable.

Disconnecting and Strip opening transformer 63 KVA to 500 KVA, 11 KV/433 volts indoor /outdoor type of any make after unscrewing nuts /bolts, screws and connected accessories such as breather conservator tank, temperature gauge for replacement of defective HT /LT coils ,defective parts (payment of defective parts to be replaced shall be measured and paid separately), reassembling after replacing the defective coils /defective parts and replacing the top gasket sheet and other insulating packing materials and testing complete all as specified and directed including taking out, handling of distribution transformer of any size any capacity to workshop & back to the installation. Photos of all stages of repair to be att with the bills for payment. (Note :- The reassembling element covers the assembling of parts not to be changed whereas for the rest it shall be the part of the item being replaced.) (Cost of transportation of transformer is deemed to be included in rate). Date of Repair, CA number alongwith name & phone number of JE to be written on the item.

M&L rewinding of transformer of any capacity HT/LT coils using the same gauge of super enameled copper winding wire and replacing the old paper tape insulation, necessary insulation packing’s/ paper insulation etc with replacement of crap tape, prosen sheet, silphase brazing rod, HT block, LT block etc are included, complete all as specified and as directed. Photos of all stages of repair to be att with the bills for payment. Date of Repair, CA number alongwith name & phone number of JE to be written on the item. (Note –The coil replaced shall have same number of turns, gauge, insulation value matching as per manufacture’s design. Measurement shall be made of winding wire consumed.).

Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences.

S&F for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed Make- Havells/Anchor/Finolex

All as per item No 46 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5 sqmm earth wire

All as per item No 46 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5 sqmm earth wire

All as per item No 46 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed . (Note- Modular cover plate of any module with all fittings are included in point wiring.) Make- Havells/Anchor/Finolex

All as per item No 50 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5sqmm earth wire

All as per item No 50 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5sqmm earth wire

All as per item No 50 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way complete all as specified and directed. (Make : Anchor/Havells/ABB)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) , (Make : Anchor/Havells/ABB).

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed. (Make : Anchor/Havells/ABB)

S&F switch 15 Amps flush type 230 Volts, AC complete all as specified and directed. (Make : Anchor/Havells/ABB)

S&F switch socket combination 5 pins, 6 Amp, flush type piano (multi purpose). (Make : Anchor/Havells/ABB)

S&F switch Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed. (Make : Anchor/Havells/ABB)

Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 10 Amp , 240 Volts complete all as specified & directed.

Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 15/16 Amp 240 Volts complete all as specified & directed.

Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6 Amps 2 pin/ 3 pin, 240 Volts complete all as specified & directed. .

Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6/16 Amps twin 3 pin power socket ,240 Volts complete all as specified & directed.

Supply & fixing 5 step fan regulator modular type (ISI marked confirming to IS 3854:1997)), single pole, 240 Volts complete all as specified & directed

Supply & fixing Bell push modular type (ISI marked confirming to IS 3854:1997)), single pole, 5/6 Amp , 240 Volts complete all as specified & directed

Supply & fixing 5 step fan regulator single pole, 240 Volts complete all as specified & directed. Make- Anchor/Havells/ABB

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC casing caping with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed. Make- Havells/Anchor/Finolex

All as per item No 67 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmmwire with 1.5sqmm earth.

All as per item No 67 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmmwire with 1.5sqmm earth wire.

All as per item No 67 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F Ding Dong door bell complete all as specified and directed .(Make : Anchor/Havells/ABB(marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, Make : Anchor ISI marked. (Make : Anchor/Havells/ABB ( ISI marked)

S&F LED bulkhead 10W with IP 65 protection 240V Make- Crompton Havells/ Phillips

S&F LED Mirror Light 10 Watt with diffuser, Decorative type,complete all as specifed & directed. Make :-Crompton / Phillips/ Havells

S&F LED bulb 10 Watt suitable for angle lamp holder base B-22 230V ,complete all as specifed & directed. Make :-Crompton or equivalent in Phillips/ Havells

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. CA number, Two Years Warranty End Date & Phone number of Contractor to be endorsed in the item with indelibile ink. Make : Phillips/Havells/ Crompton.

S&F 36W LED 6000K (2X2) pannel light mounted white powder coated luminaire screwless design , complete all as specified and directed. Make : Havells/Crompton/ Phillips/ Bajaj

Dismantling and taking down existing unserviceable submain wiring from batten/conduit of any size and making good to disturbed surfaces to match the existing surfaces.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories complete all as specified and directed. Make- Havells/Finolex/Polycab

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed.Make- Polycab/Havells/Finolex

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed.Make- Polycab/Havells/Finolex/CCI

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed. Make- Polycab/Havells/Finolex

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing .

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways. Make:-Havells /Anchor/ Legrand / L&T.

All as per item No 85 above but 8 ways

All as per item No 85 above but 4 ways

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc complete all as specified and directed Make:-Havells /Anchor/ Legrand / L&T .

S&F MCB SP 06 to 32 Amps 415V incl all termnials, fitting etc complete all as specified and directed Make:-Havells / Anchor/Legrand / L&T .

S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc complete all as specified and directed Make:-Havells /Anchor/ Legrand / L&T .

S&F Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links, Blanking Plates. Make:-Havells /Anchor/ Legrand / L&T

S&F CRCA sheet metal enclosure double door, outdoor type suitable size including single phase Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC etc complete all as specified and directed Make:-/Havells / HPL / L&T .

S&F CRCA sheet metal enclosure double door, outdoor type suitable size including three phase Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC etc complete all as specified and directed Make:-/Havells / HPL / L&T.

Commercial Electric Co.

Raj Construction

BHARATI ENTERPRISES