Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹14.8 L+₹17,645.50 (1.21%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹15.0 L+₹35,341.50 (2.42%)Rejected-Finance LABU RAM STREET KOTKAPURA PB 151204 | KOTKAPURA | FARIDKOT | PUNJAB | 151204 | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L5₹15.2 L+₹61,512.50 (4.21%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹15.6 L+₹95,571.50 (6.53%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
4 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East ) Ferozepur Cantt
GE (East ) Ferozepur Cantt
CERTAIN REPAIR TO BLDG (OTM ACCN) OF 507 ASC BN, 52 ARMD REGT and 962 TK TP PI ASC UNDER AGE B/R-II OF GE (EAST) FEROZEPUR CANTT
2022_MES_530554_1
8002/GE/E/FZR/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
GE (East ) Ferozepur Cantt
please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (East ) Ferozepur Cantt
₹30,000
Yes
16 Jul 2022
13 Jun 2022
6 Jul 2022
13 Jun 2022
4 Jul 2022
29 Jun 2022
Amount
Racking out joints/ pointing to brick work or brick tiles,laid flat in floors,surface channels,roofs etc. work built in cement mortar complete all as specified and directed
M&L flush pointing to brick laid flat or brick tiles in roofs and paving in cement mortar (1:3) complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
Material & labour for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm or 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces complete all as specified and directed
Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed
Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed
M&L for Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over and including10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
M&L Machine cut kota stone slab flooring 20-25mm thick over and incuding 15 mm cement screed bed or bedding layers in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in flors over and incuding 15 mm thick screed bed 1:6 complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness ( below or above ground level) complete all as specified and directed
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in floor finished including necessary form work complete all as specified and directed
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed
M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed
M&L for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement complete all as specified and directed
M&L preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls. complete all as specified and directed
M&L preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed
M&L preparation of new plastered or unplastered surfaces and applying two coats of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as complete all as specified and directed
M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed
All as per item 21 above here-in-before but using old bricks retrieved from dismantling under here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed
Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified and directed
Refixing wooden shutters of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified.
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed
M&L for PCC (1:3:6) type C-1 using 12.5 mm graded stone aggregate as in filling steel frames etc including necessary form work complete all as specified and directed
Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone aggregate as in bed block hold fast block complete all as specified and directed
S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified.
S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed
S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed
S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed
S&F for 300 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed
S&F in Repair 300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed. Make Prayag/Polytuf or equivalent make as approved by GE.
S&F factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
S&F factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
S&F framed work such as grills,gratings etc with end of bars shouldered and/ or riveted,or forged into spikes; framed guard bars;barred iron doors;ladders; framed balusters; walk ways;railings; frame work of water tanks and similar work con-forming to Fe-290.Gde-E-165 complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed
S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed
M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed
Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified & directed.
S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed
Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed
S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed
S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed
S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed
S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed
Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floorscomplete all as specified and directed
Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed (Note- Serviceable tubing retreived from item No 59 shall be reused)
Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed. (Note- Serviceable tubing retreived from item No 59 shall be reused)
S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed
PVC flush pipe/Bend pipe 32 mm dia for low level flushing cistern including re fixing of cistern at its position complete all as specified and as directed.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed
S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed
S&F in Repair seat cover For WC, any colour pattern with flat bottom and cover mild steel hinging device complete all as specified and directed.
S&F in Repair to Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed
S&F in repairs vitreous china wash basin,white flat back,size (450X300) mm including 15 mm brass CP Pillar taps,waste coupling PTMT 32 mm,, brass CP stove valve15 mm, low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, and bracket complete all as specified and directed
S&F in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F in repairs Waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 32mm- 45gms) complete all as specified and directed
S&F in repair 15 mm bore Bib tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed
S&F in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed
S&F in repair stop cock standard 15 mm cast copper alloy cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe (Min wt. 90 gms). complete all as specified and directed
S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed
S&F in repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified.
All as per item no 82 here in before but 1000 ltr capacity complete all as specified and directed.
S&F in repairs 15 mm ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed.
S&F in repairs 20 mm ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed.
S&F in repairs 15 mm pillar taps, PTMT any colour high pressure, screwed for iron pipe and fixed (Min wt- 110gm) complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.
S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes etc complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed.
S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50 mm long complete all as specified and directed.
Demolation of unreinforced cement concrete of any description and in and position not otherwise specially provided for or as in Sunken & roof kerbs complete all as specified and directed.
M&L Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion complete all as specified and directed.
M&L APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and directed
M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and directed
Supply only integral water proofing compound (ISI Marked) complete all as specified and directed.
Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and directed.
Dismentlling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed
M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24 complete all as specified and directed
S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer -in -Charge in writing, complete all as specified and directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L 15 mm thick screed bed or bedding layer of mortar in CM(1:6) using water proofing compound @3% by weight of cement or as per manufacturer instructions which ever is more on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid separately
S&F Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof, complete all as specified and directed.
S&F for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m including preparation of roof surfaces complete all as specified and directed.
M & L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed.
S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
All as per item No 110 above but except tiles complete all as specified and directed. (Note:- Serviceable tiles retreived from item No 104 will be reused)
S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame complete all as specified and directed
M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed
S.R. Kaura and Company
M/s Harkesh Kumar Bansal
DHAWAN CONSTRUCTION COMPANY
M/S Sandhu Const.Co.
M/S Pee Kay Builders
ABHISHEK AND COMPANY
Supreme Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .