SPECIAL REPAIR TO BLDG NO RH-05 (BN STORE) OF INF BN UNDER GE JUTOGH

Amount

Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 10mm thick on other than fair faces of brick or stone masonry surface in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished & even and smooth mixed with water proofing compound complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm thick/450x350x7 mm thick fixed over and including 10mm thick screed bed in CM 1:4 on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the existing surface complete all as specified.

M&L for 18-20mm thick granite slab (of any type) work (table rubbed and polished) in plateform, urinal prtition and the like fixed with and incl screed bed 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade of granite including circular cutting or notching for fixing cooking platform and counter etc., complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, nominal mix, using 20mm graded crushed stone aggregate for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl use and waste of necessary formwork complete all as specified and directed.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F MS TMT bar 6mm to 8mm dia cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping, benching cills, roof kerb, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 30mm thick IInd class hard wood (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 25mm thick IInd class hardwood clean sawn boards or planks, width n exc. 20cm complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square, with plain, chamfered or rounded mitered and rebated sash bars any numbers for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) fitted to chowkats, windows, ventilators etc. are provided with stiles and rails as specified in SSR Part-I, Section 8 Clause 8.24 (b) complete all as specified and directed

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

S&F GI metal suspended ceiling system OREO GI lay in plain of 600 x 600 x 0.5mm (TEGULAR) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified & directed.

S&F framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads etc in squares n.exe 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, path, hardstanding, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

S&F butt hinges 100 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F butt hinges 50 mm size medium weight cold rolled mild steel compete all as specified and directed.

M&L for 2nd class hard wood small fittings such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours, articles n exc 200 cucm each compete all as specified and directed.

S&F mild steel barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 150mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S&F 125mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair curtain rods of 20mm dia, mild steel PVC coated including fixing brackets, stopes, rollers etc. complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20mm bore, steel water tubing & connections complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repair 15mm bore, bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, complete all as specified and directed

S & F in repair 15mm bore Stop valves cast copper alloy, chromium plated, concealed type, screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed

S & F in repair 20mm bore Stop valves cast copper alloy, chromium plated, screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed

S & F in repair 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified

Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, ISI marked hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ CI trap, cement concrete bedding and making good floor complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm including brackets, CP brass coupling, CP pillar tap 15mm dia and PVC waste pipe complete all as specified and directed

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracked guard and railing 60 cm long fixed to rawl plugs with chromium plated brass screws and washers complete all as specified and directed.

S&F in repairs soap dish chromium plated of size 180mm x 160mm x 90mm thick any type, fixed to wall with brass screws and cup washer complete all as specified.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channels and drains including necessay form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F mild steel barrel tower bolt 150mm long stove enameled black with bright bolt complete all as specified and directed

Dismantling of cast iron / reinforced concrete drain pipe 75 mm to 100 mm dia jointed in cement mortar and taking out of trenches or wall if required, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend any radius of 110mm bore fitted with oval access door complete all as specified and directed

S&F PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified.

S&F 110 mm bore PVC (SWR) reducer, single, equal or un-equal of any length incl jointing with solvent cement as required complete all as specified.

S&F PVC (SWR) vent cowl of size 75 mm bore complete all as specified and directed.

S&F PVC (SWR) P trap 110mm dia complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old previously treated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width & girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint of any tint on external wall surfaces complete all as specified and directed.

M&L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, preparation of surfaces for further treatment and applying two coats of oil bound distemper (white/Approved shade) over a coat of wall care putty (2-3mm thick), complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer on plastered surface complete all as specified and direceted.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eaves board etc., fixed with self tapping screws compete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete for sub base floors complete all as specified and directed.

Demolition of stone slab and tiles of any thickness or description in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 20 - 25 mm thick machine cut kota stone slab, edge cut by machine 550x550 mm (in one colour) as in flooring over and including 15mm thick screed bed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.

Dismantling timber scantlings over 40 sq cm in section in any position (unframed work) complete all as specified and directed.

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work complete all as specified and directed

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work but except timber, complete all as specified and directed

Supply only water proofing compound as approved complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed

Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position fixed with nails etc complete all as specified and directed.

S&F IInd class hard wood plain fillets exc 13 & n.exc 25 sqcm rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Roughening surface of old concrete floor/plastered surface by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

M&L for Mild steel sheet eaves gutters, 1mm thick 150mm dia galvanised class 3, half roundwith rounded edges incl suitable bracket for gutter and required PVC pipe of 110mm dia, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC concealed Conduit with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 99.00 here-in-before but for one 3/5 pin socket 5 Amp on same board complete all as specified and directed

All as per item No 99.00 here-in-before but for one 3/5 pin socket 5 Amp on independent board with 2.5 Sqmm wire and 2.5 Sqmm earth wire, complete all as specified and directed

All as per item No 99.00 here-in-before but for 3 pins socket outlet 15A independent with 4 sq mm wire and 4 sqmm earth wire complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed

S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed

S&F batten holder PVC/ Polycarbonate type with base/ back plate suitable for CFL Lamp, complete all as specified and directed

S&F in repairs LED tube light fitting, 1x10watt, 2 ft long, 230v , surface mounting luminaire suitable for hanging on any surface including connecting twin core cable up to nearest point complete with separate electronic driver & high brightness LEDs white colour complete all as specifed and directed. Make: Polycab Cat Part No. INTENSO LXS LED BATTEN 2 Feet 12 W/ Crompton Cat Part No. LCTL-9-CDL/ Bajaj Cat Part No. BSLSB 10WH.

S&F LED Bulk head luminaire 10W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as specified and directed. Make: Polycab Cat Part No. 60 BHE 10W 60/ Crompton Cat Part No. LBHP-10-CDL/ Bajaj Cat Part No. BIBWP 10W LED.

S&F LED building secuity light 25 watt, incl bracket as per suitable size with all connected accessories (clamps, nut, bolt etc) complete and including taking down existing fittings complete all as specified and directed. Make: Polycab Cat Part No. PCGLS T1 25 N/ Crompton Cat Part No. LSTS-25-CDL/ Bajaj Cat Part No. BCLST 25W LED.

S & F LED tube light along with fixture, 20W (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed. Make: Polycab Cat Part No. INTENSO LXS LED BATTEN 4 Feet 18 W/ Crompton Cat Part No. LCTL-18-CDL/ Bajaj Cat Part No. BCLSB 18 WH.

S&F in replacement of LED bulb warm white colour with B-22, base inplace of burnt CFL of capacity 09 watt, complete all as specified and directed.

S&F in repair submain wiring with 2X6 Sqmm +1X6.00 Sqmm Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and incl 20mm dia PVC conduit with all accessories complete all as specified and directed. Note: Three run of 06sqmm wire shall be measured as One RM

S&F in repair VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete as specified and all as directed. Note : 1. Rates of MCCB shall deemed to be included in the quoted rates. 2. MCB SPN/SP/TP will be measured seperatly.

S&F sheet metal enclouser, distribution board, 4 way, TP&N, double door, fitted with bus bars, neutral links suitable for 415V, 50Hz, blanking plates, suitable for TP/FP MCB incl taking down existing unserviceable TPN DBs complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S&F MCB TPN 63 Amps, 415V, 10KA, incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F MCB SPN 6-40 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F MCB SP 6-32 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers shutter with fastner nut bolts washer etc complete including electrical connection with copper cable from ceiling rose to exhaust fan including taking down old exhaust fan to MES store yard complete as specified and all as directed.

S & F Water heater storage type, electric supplied of capacity 25 litres minimum 5 stars rating ,8 Bar Pressure , vertical mounted complete, including all accessories and fitting etc. complete all as specified and directed.

S&F metal clad single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 Volt complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc, or for shafts, wells, cesspits manholes, pier holes etc ne exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

Removing excavated material to a distence n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site complete as specified and all as directed. Note: Rate for all accessories such as bend, joints, nut bolts, clamps deemed to be included in quoted rates.

Disconnecting and taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc. complete all as specified and directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 16 sqmm 4 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.

Supply, fixing & laying GI tubing medium grade 40 mm dia for road crossing along with pole/culvert / drainage for mechanical protection of cable complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps etc if required are incl in quoted rates.

M/S JOHN VASSELLY

NSK TRADER

M/S Jaswant Kumar Aggarwal

JASWANT SINGH ANAND