REPAIR AND MAINT TO JOINERY, TILING WORK, PLUMBING AND ALLIED CONNECTED B/R WORK IN SARVATRA VIHAR UNDER GE (CENTRAL) KHADKI.

Amount

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed.

Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc, complete all as specifed and as directed.

Supply and fix Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc, complete all as specifed and as directed.

Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.

Supply and fix for 30mm thick 1st class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 5mm thick tinted float glass and 0.36 mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Supply and fixaluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and a directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix Butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix Extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specifed and as directed.

Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.

Supply and fix Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.

Supply and fix Extruded aluminium alloy handles 150mm long in size, fabricated type,anodised complete all as specified and as directed.

Supply and fix for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed.

Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specifed and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings/wall cladding etc complete all as specifed and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complate all as specifed and as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.

Supply and fixfor Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap (110mm bore) & PVC flushing bend fixed complete all as specifed and as directed.

Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specifed and as directed.

Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets.

Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed.

Supply and fix in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specifed and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed.

Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed.

Supply and fix in repairs Central hold basin Mixer chromium plated Hot and cold with copper pipe complete all as specife and as directed.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specifed and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed.

Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed.

Supply and fix in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifed and as directed.

Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specifed and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed.

Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.

Supply and fix in repair PVC floor trap/Nahani trap 75mm complete all as specifed and as directed.

Supply and fix in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specifed and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specifed and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed.

Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed.

Material and labour for disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Material and labour for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.

Material and labour for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile n. exc 0.36 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 61 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring/sub base complete all as specifed and as directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface, providing Material and labourfor carrying out non-destructive water proofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed. MAKE :- PIDILITE or equivalent

Material and labour for fixing the metallic packer for hydrophobic PU foam including making holes and sealer all as per manufacturers specification, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed. MAKE :- PIDILITE or equivalent NOTE :- This item is catered only for Material and labour for fixing the metallic packer

Material and labour for the chemical cleaning of tile joints and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc,as per the sample done at site complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty 3mm thick to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed.

Material and labour for preparation of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto height 10mtr necessary scaffolding etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed.

Material and labour for plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specifed and as directed.

Material and labour for plain cement concrete (1:2:4) type B-2, 100mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Material and labour for Chequered cement concrete rubber moulded coloured tiles glossy finish 300mm x 300mm x 25mm thick , set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed of cement mortar (1:4) including pointing with white cement with pigment to match the shade of tiles including demolition of existing tiles and removing the debris outside the defence land complete all as specifed and as directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching, kerb, mud stop, rounded or chamferred on edges, coping including necessary formwork wherever required complete all as specifed and as directed

S V CONSTRUCTION (BID ID -3301862)

JP ENTERPRISES (BID ID -3301990)

MAHESH DADAJI BACHHAV (BID ID -3304854)

Shri Sant Cosntruction (BID ID -3302000)

S.R.M.K Enterprises (BID ID -3301772)

Suraj Sukhdev More (BID ID -3307047)

UNIQUE ENGINEERS (BID ID -3307174)