Extension of central heating to operation theatre block of Sub-District Hospital Zanskar by P/F of steel radiator panels alongwith MS piping / insulation and allied works.

Amount

SUPPLY,INSTALLATION,TESTING AND COMMISSIONING OF:

Hot Water Radiators Steel panel heating radiators with working pressure ranging from 10-13 bar having working temperature at 110°C ,complete with Top grilles and side covers as standard alongwith inlet valve, outlet valve, air purge valve and threaded plug as per OEM. Inlet Water Temp: 75oC Outlet Water Temp: 65oC Room Temp: 22oC

2000 Kcal/Hr (Double Panel Double Convector)

4000 Kcal/Hr (Tripple Panel Tripple Convector)

M.S Piping Following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) including repairing of damage to building etc. as per specifications and as required complete in all respect. Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

Above Ground Mild steel ERW hot water piping of class ‘C’ complete with fittings etc as per specifications and drawings.

50 mm DIA

40 mm DIA

32 mm DIA

25 mm DIA

20 mm DIA

Angle Iron Supports

Supports for hot water piping at various locations to be fabricated out of 4040x5 mm, 5050x5 mm, 6565x5 mm as per site requirement

Insulations (Above Ground) Mikron (Mikasha International) Insulation 750 GSM insulation raped with Hesen cloth, binded with chicken mesh alongwith 24 gauge Al/ G.I. Cladding

50 mm DIA (50 mm thick insulation)

40 mm DIA (25 mm thick insulation)

32 mm DIA (25 mm thick insulation)

25 mm DIA (25 mm thick insulation)

20 mm DIA (25 mm thick insulation)

Valve

Butterfly Valve

80 mm DIA

Ball Valve

50 mm DIA

Non- Return Valves C.I./G.M. Non Return Valve with Flanges etc. complete as per specification of the following sizes.

80 mm DIA (GM Threaded Vertical)

Y-Strainers C.I./G.M. Y Strainer with Flanges etc. complete as per specification of the following sizes.

50 mm DIA (GM Threaded)

M/S HIGHLAND ENGINEERING

M/s Bhat Engineering Works