REPAIR/ MAINT B/R NATURE WORKS FOR DR SR KVS AUDITORIUM, PROVN OF POWER CONNECTION/ INSTALLATION OF CHARGING POINTS FOR ELECTRIC VEHICLES AT CGDA AND CERTAIN MINOR AND REVENUE WORK AT BHDC UNDER GE (EAST) DELHI CANTT-10

Amount

Dismanting of Gypsum board ceiling including GI frame work of all sections, cleats, wire complete all as specified and directed.

S&F GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm thick and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sections(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified and as directed.

M&L providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and applying 2mm thick birla/JK wall care putty over surface of Gypsum ceiling and then usinng sand paper to prepare smooth and even surface complete all as specified and directed.

Taking down of chowkhat or frame (without taking off shutter from frame) area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.

S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.

S&F Factory made Solid PVC Moulded Door Shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

S&F in repair Aluminium doors powder coated single/Double shutter type consisting of frame vertical and horizontal members of size 101.6x44.75x14 gauge thickness vertical style of door shutter of size 80x44.45mmx14 gauge, top & middle rail of size 105x44.45mmx14 gauge bottom rail of size 150x44.45mmx14 gauge, 5mm thick plain/frosted/tinted glass fixed to top portion of shutter and 5mm thick Alu composite panel fixed to bottom portion of shutter with Alum beading and rubber gasket of suitable size including fixing of 02 Nos Alum Handle 230mm size, 01 No. Hydraulic floor spring and 2 Nos Alum tower bolt of size 200mm one lock with two keys fixed with rawl plug complete and also any damage in floor and walls will be rectified with matching the existing finish including taking down of existing shutter with frame complete all as specified and directed.

M&L for 20 mm thick of approved shade granite stone (superior Quality) slab (table rubbed and polished) as in floors, jambs, steps, Gate Pillar, cooking platform etc and the like, over & including 15 mm thick Rendering in CM 1:4, pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make on (tread of stair case) granite complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. & removing debris out side MoD land Complete.

Demolition of brick work built in cement mortar of any description and including PCC Coping etc and disposal of all debris out side Mod land complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old size bricks built in CM 1:6

M&L 10-12 mm thick polymer modified ready-mix cement based plaster Make : Ultratech (Brand name Readiplast) Complying to IS-1661-1972, IS-2250-1965, IS2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer’s instruction, on fair faces of brick masonry or concrete surface finished even and smooth Complete all as specified and directed

M & L for preparation of new plaster surfaces and applying two coat plastic emulsion paint over 3 mm thick wall care putty on walls complete all as specified and directed.

M & L for preparation of new plaster surfaces and applying two coat of exterior emulsion paint over 3 mm thick wall care putty on walls complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and directed.

M&L for Double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles Exc 0.42 sqm but not exceeding 1.08 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement plaster in CM 1:6 and finished the surface of plaster rough complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 300x600x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick cement plaster in CM 1:4 and finished the surface of plaster rough complete all as specified and directed

Petty repairs to leaking water in pillar tap, stop cock, angle valve, bib taps, flushing cistern, urinal, etc of any description by changing the washer etc complete all as specified and directed.

Petty repairs to one piece cistern mechanism,urinal sensor repairing by authorised service center of jaguar complete all as specified and directed.

S&F in repairs vitreous china wash down water Couple closet pan padestal pattern white,size (775x350x650mm) Tarp Distance (mm) S-250 etc complete all as specified and directed. Make Jaquar Model No LYS-WHT-0314

S&F in repairs vitreous china squatting pan, orissa pattern, size 580x440mm white, with integral foot rests( excluding flushing cistern & flush pipe) but incl providing cement concrete bedding.etc Make Hindware Model: Cat .No 20076

S&F in repairs vitreous china white urinal flat back with out sensor size 710mm x 480 mm x 300 mm with grating and union for discharge pipe including providing and fixing lugs bedding urinal against wall in cement mortar 1:2 pointing around urinal back with white cement complete as specified and directed. Make : Jaquar Model No URS-WHT-0704

S&F in repairs Sensotronic Sensor Flushing Valve for Urinal with Complete Kit : Make -Jaquar( suitable For Urinal URS-WHT-0704)

S & F in repairs wash basins of size 600x 425x 195mm, vitreous China ( under counter basin) any size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. Make Jaquar Model No CNS-WHT-WB03

S&F in repair of Waste coupling Click Clack 32mm Half thread with 80 mm complete all as specified and directed. Make : Jaquar Model No ALD-729 Or Eqivalent

S&F in repair Bottle Trap (with internal partition) 32 mm with long 300 mm & 190 mm long wall connection pipe and wall flange fixed complete to walls ceilings or in floors etc complete all as specified and directed. Make : Jaquar Model No ALD769L

S&F in repair Long Body Bib Cock 15 mm dia with wall Flange complete all as specified and directed. Make : Jaquar Model No FUS-29037

S&F15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union. Make :- Jaquar

S&F for CP health faucet with 1 mtr flexible tube and hook compete all as specified and directed Make :- Jaquar

S&F in repair Toilet Paper Holder with flap recessed type complete all as specified and directed. Make : Jaquar Model No AHS 1553

S&F in repair Soap Dispenser Glass Bottle complete all as specified and directed. Make : Jaquar Model No ACN-1135 N / Equivalent

S&F in repairs 15 mm fancy type long neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repair PVC automatic , flushing cistern, low level,capacity 10 Ltrs, white, with in let, ball valve, float and handle incl brackets, complete all as specified and directed. Make: Hindware, Model Sleek Standard Dual Flush

S&F in repair single Towel rail 600 mm long complete all as specified and directed. Make : Jaquar Model No AKP-35711P

S&F in repair 15 mm dia chromium plated shower rose with rod complete all as specified and directed. (Make: Jaguar)

S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.

S&F stop/Gate valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 25 mm dia, fixed complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F 25 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/Floor, complete all as specified and directed.

S & F for 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.

S&F 75 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors and wall complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F PVC (SWR) vent cowl suitable for 110 mm bore of pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed

S&F grating dome 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed.

M& L for 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps/fastners (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment between two stone for wall any height complete all as specified and directed.

S&F SS fasteners to the dholpur stones in walls including drilling the holes and fixing the same complete all as specified and directed.

S&F factory made precast reinforced cement concrete manhole cover(RCC 1:2:4, using 20 mm graded stone aggregate) 100 mm thick (Square/rectangulr/circular) with and including 10 mm thick round ms bars @ 150 C/C both way and placed over manholes/Drain at site complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping and similer work including all necessary form work complete all as specified and directed.

M & L for preparing the old surface of wall by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying with roller one coat of plastic emulsion interior grade paint on walls complete all as specified and directed. Make;- Asian Paints Royal Health Sheild Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work as required.

M&L for preparation of old decorated, wall, chequered floor, roof (corrugal) surface, by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the Existing surface) complete all as specified and as directed. Make- Asian Apex Ultima. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.

M & L for preparing the New/old painted wall surface/Kerbstone by brooming and removing all loose layes of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one coat of synthetic enamel paint on patches to bring the whole surface at par and applying one coat of synthetic enamel paint on walls complete all as specified and directed.

Supply and fixing in Repair galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified high tensile alloy steel trap sheet having 55 MPA yeild strength and zinc (galvanized ) + Aluminum combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes. RMR 1040 profile width 1125 mm complete all as specified & directed.

All as per item No 60 above but plain sheet as in ridge/valley gutter

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified

M & L for brick work with sub class ‘B’ old sized bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L RCC 1:1.5:3 Type B1, Using 20 mm stone aggregate as lintel, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete.

M&L RCC 1:1.5:3 Type B1, Using 20 mm stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete.

Use & waste Formwork to soffits of suspended slabs such as roof slabs,flat, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete.

Use & waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M&L for mild steel 10 mm dia tmt bar and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc.

Description all as per item No 72 above but mild steel tmt bar 6mm to 8 mm dia.

M&L for plastering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces, finished the surface even and fair with using WPC @ 2% by weight of cement (Note- WPC shall be measured and paid separately)

M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair complete all as specified and directed

M&L for Joint Free non skid coloured ceramic floor tiles 400mmx400mmx 7 to 8mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

Supply only integral water proofing compound (ISI marked)

M & L for preparation of new plaster surfaces and applying two coat distemper oil emulsion over 3 mm thick wall care putty complete all as specified and directed.

M & L for preparation of new plaster surfaces applying two coats of cement based paint complete all as specified and directed.

S&F1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut complete all as specified and directed.

S&F 20 mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20 mm dia, fixed complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

S&F 20 mm bore Brass Elbow for fixing of cpvc pipe

S&F Brass Elbow (3/4 X ½) mm for fixing of cpvc pipe

S&F 20 mm Brass Tee for fixing of cpvc pipe

S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate).

S&F Aluminium windows or ventilators partly fixed and partly top hung with glazing bars complete all as specified and directed.

S&F 3mm thick figured sheet glass Pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F Wash down water closet (Pedestal pattern) using vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern including 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom pattern and cover and mild steel chromium plated or aluminised hinging device

S&F 15 mm bore Brass CP wash hand besin mixer for mixing hot & cold water screwed down complete all as specified and directed.

S&F bib taps chromium plated 15mm alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed

S& F CP shop tray complete all as specified and directed.

S&F for CP paper holder fixing to wall with ss screw compete all as specified and directed (Make : Prayag, jaquar or Equivalent ).

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F 110 mm dia PVC (SWR) reducers complete all as specified and directed

M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement.

M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia of pipe complete all as specified and directed

M&L for 150 mm bore SWG pipes grade ‘A’ laid in trenches and jointed in CM 1:1 complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth inished and reforming benching as required for 150 mm dia SWG pipe complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in Hard Standing/plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed

S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required, including forming groove of uniform size 15mm wide and 15mm deep as per approved pattern and using wooden battens all around including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

S&F coloured Vitrified Ceramic tiles (Dark shade/Double charged/Ultra charged )10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15cm thick screed bed in CM 1:6 complete.

M&L glazed coloured ceramic tiles, 600x300x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile complete all as specified and as directed.

S&F powder coated aluminium of various section as required for frame of windown/ventilators etc with one or more rebates including jointing cleats for fixing etc. & fixed with cadmium plated screw not less then 300 mm C to C & sealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufactures instructionall as specified and directed.

Supply, fabricating and fixing windows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass( Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 200mm Alu Tower bolt anodised aluminum snap beading screws etc. complete all as specified complete all as specified

S & F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick Aluminium Composite panel fixed in half bottom portion complete all as specfied and directed. Make:- Jindal/ Hindalco/Balco

S&F brass mortice lock 100mm 6 lever vertical type with duplicate key and handle set complete all as specified.

S&F Door closer, aluminium body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete.

S&F Steel work as in tubular trusses, purlins, rafter, vertical post and similar works including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS- 1161 Gde-YST-240 including one shop coat of zinc chromate primer paint incl prepartion of surface at contractor workshop before fabrication complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and directed

Supply & fixing Pre-painted galavalume alumininum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa (having weight not less than 4.35Kg/Sqm) as in roof covering fixed with cadmium plated self tapping screws of suitable size complete all as specified and as directed by Engineer in charge.

M&L for cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) as in fdn, filling and mass concrete complete all as specified and directed.

S&F vitreous china white urinals Half stall, flat back of complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.

Supply , laying and testing cable XLPE insulated screende, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty with standard aluminimum conductor 1100 Volt grade of size 3.5 Core , 50 Sqmm Earth system.

M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: for measurement purpose any puned thicness of sand will be considered.

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed.

Supply, installation, testing & commissioning in repair LT panel, Made out of modular Thermoplastic Polycarbonate enclosures which shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, Glow wire test for 960 deg. Cent. The manufacturer of panel shall submit a copy of CPRI test report, degree of Ingress protection IP 65 in accordance with IEC gasket shall be internally embedded. General Specification & Electrical Parameter:- Type of Panel:- Thermoplastic Polycarbonate. Panel Size:- 1550x 1285x 6000mm Degree of Protection:- IP65(EN60529) Bus Bar Rating:- 400A Copper System Voltage:415V,15Hz,4wire+E Installation :- Outdoor/floor mounting Cable Entry:- Incoming/outgoing from bottom. Finish Shade:- Enclosure & Accessories: RAL 7035 Mounting structure: RAL 7016 Internals 250A FP 36kA MCCB-1 No, 3 Phase Engery meter- 1 No, RYB Led indicating lamp - 1 No/Each, Digital Ammeter & Voltmeter - 1 No /Each, Control Fuse with base 2/32A- 6 Nos, Current Transformer 250/5A- 3 Nos Note:- The manufacturer of panel shall submit a copy of type test report (in accordance with ASTA certification by CPRI) of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1 and IEC 61439-2 for power switchgear and control gear assembly. Make:- Hensel/ Rittal/ Siemens

M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/ point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.

All as per item No. 1 above but for one three pin 5 Amps socket out let on independent board.

All as per item No. 1 above but for one three pin 5 Amps socket out let on same board.

All as per item No. 1 above but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and directed.

All as per item No. 1 above but point wiring of copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and directed.

S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed.

S&F Modular switch, flush button type , single pole , one way 10 Amps complete all as specified and directed.

S&F Modular switch, flush button type , single pole , one way 15 amps complete all as specified and directed.

S&F Modular socket outlet 3 pin and 2 pin , 10 amps , flush type complete all as specified and directed.

S&F Modular socket outlet 2-in-1, 3 pin, 10 and 20 amps , flush type complete all as specified and directed.

S & F distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F MCB SPN, 240 Volts, 40 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens

S & F MCB SP, 240 Volts, 16 Amps complete all as specified and directed. Make-LHavells/Legrend/indoasian

S & F MCB SP, 240 Volts, 32 Amps complete all as specified and directed. Make-LHavells/Legrend/indoasian

S&F Bldg security light fitting LED 45 Watt cast aluminium housing, toughened glass,silicon gaskect, high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. Make - Halonix Cat Part No- HLSLD-50-CWDL-R01 or equivalent in Havells/CG .

S&Fmodular white cover plate with frame , 3 module. Make:Anchor Roma /Legrand/ indoasian

S&F modular white cover plate with frame , 8 module. Make:Anchor Roma /Legrand/ indoasian

S&F modular metal flush box, 3 modules complete all as specified and as directed.Make:Anchor Roma /Legrand/ indoasian

S&F modular metal flush box, 8 modules complete all as specified and as directed.Make:Anchor Roma /Legrand/ indoasian

M&L sub main wiring with 2 runs of 6 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, FRLS copper conductor drawn through concealed conduit including PVC rigid conduit 25 mm medium grade with all fittings fixed to the surface of walls/ concealed and one run of 6 sqmm earth wire size with same description as here-in-before complete all as specified and directed.(Note:- Two run of cable along with one run of earth conductor including PVC rigid conduit shall be measured as one RM length) Make : Finloex/Havells/Polycab

Supply and Fixing in repair of five star rated Geysers of cap. 10 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed. Make: HAVELLS/V GAURD /USHA. Note :- Old unserveciable exhaust fan will be deposited to MES store yard.

S& F in repair exhaust fan 250 mm sweep 240 Volt plastic type, connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Havells/halonix/Bajaj Note :- Old unserveciable exhaust fan will be deposited to MES store yard.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. Make:-Legrand/seimens/ havells

Supplying, installation, testing & Commissioning of Surface/Wall Mounted integrated LED 4 feet Fitting of not more than 20w with plastic batten with opal diffuser IP20 .Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours. Complete with all accessories as required with connections.Make - HALONIX cat part No. - HLB-08-20- CW-IP /Polycab/CG

Supplying, installation, testing & Commissioning of Surface/Wall Mounted 10W integrated LED 2 feet Fitting with with plastic batten with opal diffuser IP20. Total system Lumen of 10W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections.Make - HALONIX cat part No. - HLB-07-10- CW-IP /Polycab/CG

S & F for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. Make-Legrend/ Havells/ ABB

S & F MCB SP, 240 Volts, 16 Amps complete all as specified and directed. Make-LHavells/Legrend/indoasian

S&F in repair of modular white cover plate with frame , 6 module complete all as specified and directed.. Make:Anchor Roma /Indo Asian/Legrand

S&F in repair after taking down rusted sunken box by modular metal flush board 6 module complete all as specified and directed. Make: Legrand/Anchor/Indo Asian

Supplying, installation, testing & Commissioning of Surface/Wall Mounted integrated LED 4 feet Fitting of not more than 20w with plastic batten with opal diffuser IP20 .Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours. Complete with all accessories as required with connections.Make - HALONIX cat part No. - HLB-08-20- CW-IP /Polycab/CG

Supplying, installation, testing & Commissioning of Surface/Wall Mounted 10W integrated LED 2 feet Fitting with with plastic batten with opal diffuser IP20. Total system Lumen of 10W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections.Make - HALONIX cat part No. - HLB-07-10- CW-IP /Polycab/CG

S&F Bldg security light fitting LED 45 Watt cast aluminium housing, toughened glass,silicon gaskect, high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. Make - Halonix Cat pt no- HLSLD-50-CWDL-R01 / Havells/CG/

S&Fmodular white cover plate with frame , 3 module. Make:Anchor Roma /Legrand/ indoasian

S&F modular white cover plate with frame , 8 module. Make:Anchor Roma /Legrand/ indoasian

S&F modular metal flush box, 3 modules complete all as specified and as directed.Make:Anchor Roma /Legrand/ indoasian

S&F modular metal flush box, 8 modules complete all as specified and as directed.Make:Anchor Roma /Legrand/ indoasian

HIND CONSTRUCTIONS

tarun construction co

M/S GEETANJALI ENTERPRISES

VIJAY KUMAR GUPTA

CUCKOO ENTERPRISES

M/S Rohit Enterprises

MRITUNJYA ASSOCIATES

Ashish Sehgal and Co.

Tsmalik