SPL REPAIR TO ROOF TREATMENT IN BLDG NO P-93,94, 95 AND 96 AND ROOF SHEET IN BLDG NO P-63 AND SPL REPAIR TO FLOORING, PLASTERING INCLUDING CONNECTED ITEMS IN BLDG NO P-105,P-106 AND P-107 AND PROVN OF RAIN WATER HARVESTING SYSTEM AT MES COLONY AND P

Amount

Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M & L for water proofing treatment roof surfaces with APP modified membrane with non woven polyster reinforced, weight not less than 3 Kg /SQM and thickness of membrane not less than 3mm thick having thermal insulation with white mineral/gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed. (a) Applying 10 mm thick plaster in CM 1:4 mixed with and incl water proofing compound @3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for 7 days for any seepage / leakage etc if any seepage is observed the recification will be carried out by pressure grouting under the pressure of 5 Kg/Sqm using cement based cement grout. After the roof surface is repaired the slab/roof will be again tested for water tightness against before processing further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets /pipes /chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS 3384-1965 @ 0.3 Kg/Sqm on the prepared surface till the surface is properly impregnated. Cont item no. 2.01.....

(d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type BO using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. NOTE :- (i) Work of water proofing treatment shall be carried out by the authorised applicator of the manufacture. Necessary documentary evidence in support of the authorised applicatior will be submitted to GE before the commencement of water proofing work. (ii) The quoted rates is deemed to include for the cost of scaffolding, T &P, etc required for execution of the work.

Supply only water proofing compound ISI Marked complete all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for Random Rubble stone walling uncourses masonary, well bedded, blended and solidly harded built in CM (1:6) complete all as specified and directed.

All as per item No 5.00 as above but except stone complete all as specified & directed.

Taking down cement or cement lime plaster/Pointing on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even smooth without using extra cement complete all as specified and directed

M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as per specified and directed.

M & L preparation old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n. exc 500 Ltrs capacity each complete all as specified and directed

S& F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item 14.00 above but 20 mm bore

All as per srl item 14.00 above but 25 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item 17.00 above but 20 mm bore

All as per srl item 17.00 above but 25 mm bore

Refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed

All as per srl item No 20.00 as above but 20 mm bore complete all as specified and directed

All as per srl item No 20.00 as above but 25 mm bore complete all as specified and directed

S&F in repairs ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore (minimum weight 210 gm ) complete all as specified and directed.

S&F in repair of 25mm bore gun metal glove or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F rolled mild steel as in angle setion, fixed indepenntly with or without connecting plates or welding with existing steel or iron surfaces etc and similar work confirming to Gde E-165 (Fe 290) including necessary cutting, welding etc and fixing in position complete all as specified and directed.

M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 50mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length complete all as specified and directed.

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed.

M&L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed.

Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed

M&L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, wall, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate), 75 mm thick, complete all as specified and directed.

M & L for PCC inter locking tile 60 mm thick ,coloured, reflective type, of approved quality, M-35 Grade with grey cement and pigment complete all as specified and directed.

M & L for laid over and including 25 mm thick sand cushion vibrated with mechanical vibrator, complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges coping and verticle post in any description complete all as specified and directed.

M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed. Note :- Supply of water proofing compound shall be measured and paid separately.

M & L PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed.

M&L glazed ceramic coloured tiles, size 450 mm X 350 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 including dismantling of old tile complete all as specified and directed

M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) including dismantling of old tilecomplete all as specified and directed.

M&L for Non Skid Ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 including dismantling of old tile complete all as specified and directed.

M&L for Non Skid Ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 including dismantling of old tile complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for 20mm thick black granite on kitchen platform, window cill and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

S&F in repair of brass chromium plated shower rose of 125 mm size with swivel joints, including Fixing to steel pipe or union of 15mm bore, mixing valve including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.

S&F in repair of Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S&F in repair of PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair of PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F in repair of Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified & directed.

S&F tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges incluing taking down of unserviceable towel rail complete all as specified & directed.

S&F in repairs Chromium plated Angle stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S & F in repair of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair of stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia. complete all as specified and directed.

M&L18/19mm thick block board grade-.II quality, interior grade with decorative type with decorative face veneer on both face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm completed all as specified and directed.

S&F Plain, solid, straight chowkats in 2nd class wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified & directed.

M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified & directed.

S&F in repair fancy type 20mm dia aluminium curtain rods powder coated fixed to bracket completed all as specified & directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete al as specified & directed.

M & L framed work such as grills, gratings, etc, with ends of bars shouledered and /or reiveted ,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work coforming to Fe 290m Gde E-165 including dismentling of wrought iron/steel wall complete all as specified and directed.

Taking down CI/PVC pipe 100/75 mm fixed wall and floor etc including accessories complete all as specified and directed.

S&F in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed.

S & F110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed.

S&F in 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed

S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, including removal to store complete all as specified and directed.

S&F 110mm dia PVC rain water pipe fixed on wall under walls as spout including complete all as specified and directed.

S&F PVC bend/ shoe of dia. 110mm complete all as specified including taking down old unserviceable complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, incl necessary formwork, complete all as specified and directed.

S&F in repair of wash hand basin vitreous china white /colour flat size 550 x 400mm fixed including waste coupling, waste pipe ,complete all as specified and directed.

S&F in repairs of pillar taps fancy type cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete all as specified an directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenched n exc 1.50 m in width and n exc 1.50m in depth for foundation, manholes, cespits, etc n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm thick in soil complete all as specified and directed

Removel of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above from the starting point complete all as specified and directed.

S&F for steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 complete all as specified and directed.

S&F MS plate or angle, channel, square cut or notched with riveted, bolted, or welded attachment complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws fixed with L & J hooks and washers, in roofs, walls etc with grade of zink coating 275 all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating Gi based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M & L for 100 mm thick PCC 1:4:8 type D-2, using 40 mm graded Sqm stone agg as in sub base etc complete all as specified and directed.

M&L for fly ash brick work with old size bricks straight or curved on Cum plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of bricks surfaces or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

M & L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan for any type of soil and rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified

Removing excavated soil exc. 250m but n exc 500m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.

M & L for coarse sand (Size 1.20mm) filling in floor or paving laid in layers n. exc. 15cm thick spread leveiled and rammed complete all as specified and directed.

M & L for gravels (Size 5-10mm) filling in floor or paving laid in layers n. exc. 15cm thick spread leveiled and rammed complete all as specified and directed.

M & L for gravels for granolithic floors graded from 12.5mm to 3.60 mm filling in floor or paving laid in layers n. exc. 15cm thick spread levelled and rammed complete all as specified and directed.

S & F of PVC pipes (Class 3 (6.0 Kg/cm2), 150 mm bore, single sockets, in any length with rubber ring joints with solvent for permanent in joint laid in floors or wall with Clips for wall complete all as specified and directed.

M & L for cement concrete bed to PVC pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm PVC bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

S & F of PVC pipes (Class 3 (6.0 Kg/cm2), Slotted pipe 150 mm bore, single sockets, in any length with rubber ring joints with solvent for permanent in joint laid in floons or wall complete all as specified and directed.

S & F of Drilling bore hole of 300 mm dia with drill bore machine of suitable capacity penetrating any tye of soil/ rock and inserting suitable length along the alinghment & connecting with PVC Slotted pipe 150mm dia upto at end point & laying (incl required item casing and caping for required length for soil not fall in boring area after bore) complete all as specified and directed. Note :- PVC Pipe will be measured and paid seperately.

S & F of MS Jali for Filtration of water and allow to move along the bore complete all as specified and directed.

S & F of one side valve150 mm dia for PVC pipe fixed at the end of Bore complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for PCC 1:3:6 Type C2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for MS work for fencing post/gates and struts made from angle iron and flat iron in any section including cutting tops to shape, drilling holes and notching for fixing of wires etc confirming to Fe-290 or Fee-330, complete all as specified and directed.

Supply only chain link MS zink coating 60 gms as per IS 4826 fencing of any mesh size and 3mm dia or wire complete all as specified. Note : This items shall be measured and paid as per actual weight or standard weight as per SSR which ever is less complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.

S & F of 4mm dia galvanised medium coated steel wire cut to length as required for fixing chain the fencing etc complete all as specified and directed.

M & L for 5 to 10 mm dia and length exc 5cm and n.exc 10cm mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

Shree Sai Ram Enterprises (BID ID -3484393)