Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
11 Mar 2024, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Naveen T
Operation and Maintenance of providing water supply scheme to Haradanahalli and other Enroute Villages in HNPura Taluk Hassan district.
RWSSD/2023-24/WT/WORK_INDENT6375
RWSSD/2023-24/WT/WORK_INDENT6375
Open
Water /sewage treatment tanks
Two Tender Document System(Two Cover)
RWSSD Division Office Hassan
4 documents required · 0 mandatory · 4 optional
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Tenderer shall obtain the work done certificate of similar nature of work (50% of the amount put to tender -for K.W.4 )in the prescribed Format from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders.(RS 64.00 Lakhs Civil Works AS PER BID DOCUMENT)
Each tenderer in his name should have satisfactorily completed (at least 90% of the contract value),as prime contractor,at least one similar work such as O&M of MVS work of value not less than Rs.64.00 Lakhs (usually not less than 50% estimated value of contract Executed in any one year O&M of MVS scheme) (50% of the project habitations) OR O&M of Urban surface water scheme of population (50% of the project population schemes).
Information on works for which tenders have been submitted and works which are yet to be completed as on the date of this Tender: (A) Existing commitments and on-going works. (As per Clause-3 of the I.T.T)
Mandating satisfactory Completion of any Multi Village Scheme with a capacity of minimum 1.315 MLD Raw Water as prime contractor executed in any one year, the following minimum quantities of work
The tenderer should submit the Registration Certificate along with the application. (should be enrolled and Renewed in R.D.P.R) Class 2 and Above.
Manpower details..(A) Valve Man-6 No(.B) Pump Operators-6 Nos (C) Electrician/Mechanic-1 No. (D) Watch Man/Helper-1 Nos. (e) Ae/JE-1 Nos
Liquid assets and /or availability of credit facilities of no less than Rs. 33.00 Lakhs.
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
Turn over of Tender cost should be executed by the contractors during any 2 financial year between 2018-19 to 2022-23. Audit certificate for the same should be furnished and signed by Chartered Accountant with UDIN Number.( AS PER BID DOCUMENT).
GST and VAT and Tax Clearance Certificate Should be Submitted..
Accurate postal address, Principal place of address, Mobile Number and email address Pan No, Tin No,
₹2,670
₹2.1 L
29 Feb 2024
29 Feb 2024
12 Mar 2024
5 Mar 2024
2 Mar 2024
Operation and Maintenance of providing water supply scheme to Haradanahalli and other Enroute Villages in HNPura Taluk Hassan district.
OPERATION AND MAINTENANCE for 1st year :- Operation and maintenance of the scheme as per TOR which includes providing sufficient technical staff valve man, watchman, operations electrician and others ...
BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...
BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...
REHABILITATION OF SLOW SAND FILTER : Providing and supplying Fliter media sand with all lead and lift
Collecting and Staking the following filter media at the site of work: For filter media
Labour Charges for Laying Fallowing Filter Media in all depth as per specification in filtration gallery works including cleanning screening and placing it under water with all lead and lift to the po...
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vac...
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vac...
REPLACEMENT OF RAW WATER PUMPING MACHINERY AT JACK WELL: VERTICAL TURBINE PUMP SET: A) VERTICAL TURBINE PUMP: Design, manufacturing, supply, errection, trail running, performance test and commissionin...
REPLACEMENT OF RAW WATER PUMPING MACHINERY AT JACK WELL: VERTICAL TURBINE PUMP SET: A) VERTICAL TURBINE PUMP: Design, manufacturing, supply, errection, trail running, performance test and commissionin...
COMBINED METER AND CONTROL PANEL BOARD UNIT: 1) INDOOR TYPE PANEL BOARD : Supply and delivery at site brand new best indegeneous make floor mounting ,free standing cubicle type control panel board un...
REPLACEMENT OF PURE WATER PUMPING MACHINERY AT PURE WATER SUMP 1 NO: Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, S...
Submersible Cables: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest...
Supply & delivery of Meter Board & Panel Board: Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of su...
CONSTRUCTION OF CHAIN LINK FENCING TO WTP -300 mtr : Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Supplying and fixing MS Rectangular poles made out of 2 equal angles of 65 x 65 x 6mm welded together and fixed in CC 1:2:4 With 2 Nos 16mm dia MS hold fast rods each of length 25cms. Including cos...
Providing and Fixing MS Block Pipe of 38 mm Dia of heavvy guage of 14 including removing the bends cutting the pipes and fixing pipe in between two vertical poles ( MS Rectangular Poles ) and spot wel...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
CONSTRUCTION OF STAFF QUARTERS: Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth by manual means for drains,canals, waste weir draft, approach channels, key trench, found...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates all Super structures of building , Road works, Water works, Irr...
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates all Super structures of building , Road works, Water works, Irr...
KSRB 4-5: Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20cms, c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing t...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S...
Providing and fixing CI Nahani trap of approved make confirming to ISI specifications and construction of cistern in M-15 as per directions( Rate is inclusive of cost of materials and fixtures and con...
Providing and fixing wash basin White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of ...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 510x1040 mm bowl depth 250 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and b...
KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and sutaible locking arrangements, making holes of suitable diameter for inlet, outlet and over flow ...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing fixtures for door a) Hold fasts (Com-Vol-2 SR/I.No 285/Pg.no.A21)
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :(Com-Vol-2 SR/I.No 12.74.1/Pg.no.109
c) Providing and fixing bright finished brass handles with screws Brass handles 125 mm with plate 175x32 mm etc. complete: (Com-Vol-2 SR/I.No 12.79.1/Pg.no.109
d) Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (Com-Vol-2 SR/I.No 12.72/Pg.no.108
e) Brass 100mm mortice latch and lock with 6 levers without pair of handles (Com-Vol-2 SR/I.No 065/Pg.no.A13
f) Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Eng...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but exclud...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Supply, installation and commissioning of Chlorine Di Oxide Generator
and confirming the specification as per below.Application of ClO2
Generator: 1) For disinfection ClO2 dosage required between 0....
ClO2 for algae removal (1496 & HCL Both)
Valve chambers : Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simi...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded coa...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Haradanahalli KW-4.docx
Tender Document • 0.16 MB
TOR Haradanahalli.doc
Instructions to Tenderers • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .