REPAIRS TO CHAJJA ROOF PLASTERING, WATER PROOFING TREATMENT ETC IN CERTAIN BLDGS OF OTM MD ACCN AT OLD CANTT PATIALA MIL STN

Amount

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, column or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed

Rendering 15mm thick in cemnt mortat 1:3 mixed with water proofing compound, on brick or concrete surfaces of wall of sunken protion, trowelled to even and smoooth finish without using extra cement with WPC paid and measered sepreatly complete all as specified and directed

25mm thick PCC 1:2:4 type BO using 12.5 mm graded stone aggregate as in sunken floor complete as specified and directed.

Applying membrane on primed surface by press application method with minimym 75mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3mm thick APP modified prefabricated five layer weight not less than 3.6kg/ sqm water proofing membrane black finished non woven polyster reinforced (wt not less than 150gm)over applying one coat of bituminous primer @ 0.4kg per sqm complete all as specified and directed.

Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed,

S&F CI bend (any radius) of 100mm bore in repair complete all as specified and directed

S&F CI bend (any radius) of 75mm bore in repair complete all as specified and directed

S&F CI bend (any radius) with ovall access door of 75mm bore in repair complete all as specified and directed

S&F CI bend/ tees of any radius for 100 mm bore with access door as in repair complete all as specified and directed

S&F CI floor trap with grating incl jointing to waster pipe in neat cement 75mm dia fixed in cemnet concrete (1:2:4) type B1. complete all as specified and directed

S&F CI cower 100mm dia complete all as specified and directed

S&F CI brach pieces , single (equal or unequal ), ordinary or invertedd (spigot or socket type) or with paralles branches of 100 mm fixed in cement joint complete all as specified and directed

Special type cas iron P or S trap 300mm to 450mm long tail suitable for 100mm dia CI pipe incl jointing to waste pipe in run lead fixed as in repair complete all as specified and directed

Cast iron diminishing pieces or tapers of size of 100mm with run lead joints complete all as specified and directed

Dismantling of asbetos/ fibre cement corrugated/ semi corrugatedd sheets in roof covering incl J or L hooks complete all as specified and directed

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm of an colour having strength of 550 mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed. Note: Fixing of sheets will be strictly according as per manufacurer's instructions

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L steel work in tubular truss including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS 1161 - 1979 grade St - 240 complete all as specified and directed.

Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long of 20mm dia. complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 100cm long of 20mm dia. complete all as specified and directed.

Supply & fixing Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

M&L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Suspension System for false ceiling consisting of Prelude 32 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability and M&L minimum 7 mm thick mineral fibre tile with NRC 0.45, pin holed texture for false ceilings, 595x595 (±5) mm in size fixed in false ceiling as per manufacturer's instructions to frame work or on snap grid, complete as with the followings :-

Suspension System Details 20-06-2020 :- Base Material Hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability Construction Method Roll formed double stroked rotary stitched construction to mechanically lock together the two metal layers of the vertical web Deflection Loading 18 kg/m with deflection limit less then L/360 as per ASTM C635 Pull-out Strength 100 kg Main Runner Dimensions 3600(L) x 38(H) x 24(W) mm Cross Tee Dimensions 1200/ 600(L) x 38(H) x 24(W) mm Cross Tee End Detail The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam” Wall Angle dimensions 3000(L) x 19(H) x 19(W) mm Main Runner Rout Spacing 150 mm Hanger-wire Material Galvanized Steel with 0.7 micron coating Hanger-wire Dimensions 2.5 mm Ø x 1800 mm Hanger-wire Tensile Strength 344-413 MPa Hanger-wire Pull Strength 110 Kgs . (Note:- if any minor electrical fitting and fixtures distributed their in will be match and fixed as existing.)

(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including supply and fixing of items all as specified as below :- Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.

(b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa, Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. (c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. (d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} (e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. (f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. (g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape.

Demolition of brick work incl all quoins arches pillars etc built in cement mortar complete all as specified & directed.

M&L for brick work in cement mortar (1:6) using sub class B bricks staight or curved on plan exc 6.0m mean raidus complete all as specified & directed.

M&L for brick work (except bricks) with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified & directed.

Taking down cement plaster on brick walls built in cement mortar incl raking out joints and concrete surfaces as in wall or ceiling etc incl hacking for key scrubbing down with water etc complete all as specified and directed

Rendering 15mm thick on brick or concrete surface in Cement mortar 1:4 finishing surface w/o using extra cement mixed with integral liquid water proofing compoound complete all as specified and directed

10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L for 5mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L complete removal of existing treatment and preparing the surfaces using ready made wall care putty incl sand papering after filling to make surface smooth and applying 02 coats of exterior emulsion paint (light shade)@ 5 SQUARE METER/litre/2 coat by using roller to external walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers / balcony etc surfaces over a coat of exterior wall primer @ 11 SQUARE METER/litre /1 coat as recommended for under coat by manufacturer of exterior elmulsion by using following brands of emulsion and primer complete all as specified & directed.

M&L for complete removal of existing treatment and preparing the surfaces using ready made wall care putty incl sand papering after filling to make surface smooth and applying 02 coats of interior emulsion paint (light shade)@ 12 SQUARE METER/litre/2 coat to wall/ceiling surface over & incl a coat of interior wall primer @ 10 SQUARE METER/litre /1 coat as recommended for under coat by manufacturer of intterior elmulsion by using following brands of emulsion and primer complete all as specified & directed.

M&L complete removal of existing treatment and applying two coats of cement base paint on wall incl preparation of surfaces and coat of primer with alkali- resistant priming paint complete all as specified and directed.

M&L, complete removal of existing treatment and applying two coats of oil bound distemper on wall over a coat primer a incl preparation of surface complete all as specified and directed.

M&L for applying two coat of OBD, white or tinted over a coat of primer incl prepared new plastered surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint incl preparation of surfaces and coat of primer with alkali- resistant priming paint complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cemnet mortar bedding removing serviceable tile to store and rubbish off the premises complete all as specified & directed.

M&L for vitrified ceramic tiles 8-10mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified & directed.

M&L for vitrified cermic, stain & scratch resistant, joint free, premium quality coloured tiles 600x 100 mm and 8-10 mm thick as in floor etc in any pattern of light & dark tiles as approved on vertical surfaces such as in skirting / dado etc length of each unit not less than 600mm and height not more than 150 mm set and jointed over and pointed in white cement with pigment to match the colour of tiles complete all as specified & directed.

M&L for anti skid ceramic joint free premium quality coloured tiles 300x300mm and 6-7 mm thick as in floors etc in any pattern of light & dark tiles as approved set and jointed in neat cement slurry and pointed in white or colored cement to match in floor etc , over and pointed in white cement with pigment to match the colour of tiles complete all as specified & directed.

M&L for ceramic glosssy finish, joint free premium quality coloured tiles 600x 300 mm and 8-9 mm thick in any pattern of light & dark / highlighters tiles etc as approve on vertical surfaces such as in skirting/ dado etc set and jointed in cement slurry over and pointed in white cement with pigment to match the colour of tiles complete all as specified & directed.

Providing and laying premium (1st) quality straight edge , ceramic tiles exterior grade WA value between 3% to 6%, flexural strenght greater that 22n/mm2 scratch resistance on mohs scale greater thatn 4 and crazing resistance of 2 cycles area of each tile exc 0.09 Sqm but n exc 0.16 Sqm in floors etc in any shade and design/ pattern of light & dark tiles etc set and jointed in neat ceement slurry and pointed in white or colored cement to match in floor etc , over and pointed in in matching colored polymer cement based grout to match complete all as specified & directed.

M&L for baroda green marble , machine cut as in shelves / steps / cills / jambs / skirting / border onle in tile flooring and the like works and flooring etc 15-18 mm thick incl bul-nose the front length , set and jointed in cemnet slurry over & incl screed of 15mm thick redering in cemnet mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab incl rubbing cutting and mirror type grantie polishing complete all as specified & directed. Note : Single piece should be used in steps/ cills / jambs/ shelves

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing cutting and mirror type grantie polishing complete all as specified & directed.

Machine cut kota stone slab as in skirting of length not less than 500 mm each & 18-20 mm thick set and jointed in cement slurry over & pointed in cement mixed with pigment to match the shade of slab incl rubbing cutting and mirror type grantie polishing complete all as specified & directed.

M&L for Screed bed or bedding layer of mortar 20 mmthick in cement mortar 1:4 for laying floor finishes complete all as specified & directed.

Demolition of cement concrete in floors and paving n.exc 15cm thickness below or above ground level, complete all as specified and directed

50 MM thick, PCC 1:3:6 type C-2 using 20 mm graded stone agg as in plinth protection finished even & fair without using extra cement complete all as specified and directed.

Taking down chowkaths or frames n.exc 1.5 Sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified & directed.

Taking down chowkaths or frames Exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified & directed.

Taking down Shutters exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening complete all as specified & directed.

S& F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply & fixing lugs, 125 mm size hinges, lock strike plate, etc.,complete all as specified & directed.

S& F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size MS hinges, lock strike plate, etc., complete all as specified & directed.

S&F factory made flush shutters 35mm thick 7ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Mild Steel Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (804 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf.

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (faclory made) open rebated and divided to receive glass, guaze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size or members of shutter as specified in SSR -91 pT -1 section 8 clouse 8.20(a) kiln seasoned and chemically pressure treated all as specified incl stainless steel 34 grade wire cloth( wire dia 0.36mm) and the supply and fixing following items: (a) Mild steel butt hinges 150mm - 4 Nos, per leaf (b) Stainless steel (304 grade) finished tower bolt 200mm long -2 Nos per leaf (c) Stainless steel (304 grade) finished handles 200mm -2 Nos per leaf

S& F Providing FACTORY MADE PVC INTERNAL DOOR FRAME of size 100mm x 45mm with a wall thickness of 5mm (±0.25), made out of extruded 5mm (±0.25) thick Prelam PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,and by joining 3nos. heat bent PVC sheet sections.The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5mm (±0.25) thickness. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm (±0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and joined with 4nos. of 150mm long brackets of 15mm x 15mm M.S. Square tube. The two vertical door frames are to be reinforced with 40mm x 20mm M.S. tube of 19 guage through out the frame. The door frame shall be fixed to the wall using 8/100mm long M.S. Screws through the frame by using anchor fastners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufactures specification and direction of Engineer-in-charge

S&F Providing FACTORY MADE MOULDED PVC DOOR SHUTTER 30mm thick consisting of solid core single leaf Particle Board of 25mm thickness, lipped with 15mm (5mm x 3) thick x 25mm width on one stiles and top rails & 10mm (5mm x 2) thick x 25mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet with 2, 4, 6 raised panel design in different prelam colours on one side after routing the Moulded design on Flush door / Particle Board & 2mm prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the PVC lipping etc. complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing.

Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-191(R) sheet 1/4 to 4/4 complete.

Factory made steel windows or ventilators, fixed type with glazing bars complete all as specified and directed

Powder coated (Minimum thickness of powder coating 50 micron ) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

Aluminium door window (Casement & sliding) and ventilator shutters with 50 micron powder coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc. and aluminium beeds in inner shutters complete fixed in all respect as specified & directed by Enginner-in-Charge.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed

S&F powder coated aluminium handles 150mm complete all as specified and directed

S&F powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutterscomplete all as specified and directed

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDM gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6x 63.5mm (4'x2.5') and of approx weight @ 1.345 kg/ SQUARE METER complete fixed in position in windows in all respect as specified

S&F PVC hollow Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed.

Supply and fixing in repairs MS powder coated peg set of six complete all as specified and directed

Material and labour PCC 1:3:6 type C-1 (20 mm graded mechanically crushed stone aggregate) as in filling pressed steel frame /hold fast blocks etc complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete fixed all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal exc. 6mm but n exc. 9mm complete all as specified and directed.

M&L for Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I 'P' trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

Brass chromium plated shower roses 125 mm size with swivel joint any size fixing in repairs all as directed and specified

Taking up or down steel tubbing and connections incl cleaning for refixing or removing to store yare of size 15mm bore complete all as specified and directed

Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed

All as per Serial No 86 here in before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item)

Taking up or down steel tubbing and connections incl cleaning for refixing or removing to store yare of size 20mm bore complete all as specified and directed.

Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed

All as per Serial No 89 here in before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item)

450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and directed

Rotational moulded polythene water storage tanks , double layered (Cylindrical vertical with closed top) of capacity 500 litre , hoisted and fixed in position as in repair complete all as specified and directed

Bib tap cast copper ally chromium plated , fancy type , with capstain head handle screwed down screwed for iron pipe and fixed for 15mm bore pipe after taking down of old brass bib tap complete all as specified and directed.

Ball brass valve , high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs complete all as specified and directed

Stop valve cast copper alloy acrewed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bor 20mm fixed as in repair complete all as specified and directed

Stop cock fancy type , brass chromium plated with long shank (concealed type) with CP wall cap 15mm bore after taking down of old brass stop valve complete all as specified and directed.

S&F stainless steel tubing of 25mm bore mild steel chromium plated 1.6 mm wall thickness as in curtain rod complete incl S&F 02 nos brackets , stop etc in repair all as specified and directed as in repair.

Taking down eaves, gutters and rain water pipes (any size or pattern) incl all fitting incl cleaning for refixing or removing to store yard complete all as specified and directed.

150mm dia PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls with and inclundig holder bad clamps made out 40mm by 30mm F1 and 12mm dia round iron stays and making good the disturbed portion in CM 1:3 to match with surrounding area completer all as specified and directed.

PVC (SWR) bends for 150mm dia rain water pipes with rubber ring joints complete all as specified and directed.

S&F 6mm thick looking mirror with smooth finish edges / sides fixed to wall with stainless steel brackets / plugs / connecter / spacers/ screws etc chrome finish complete fixed in position all as specified and directed.

S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fiexed to walls with plug and brass chromium plated screws complete all as specified and directed.

Applying a caot of putty including applying two coats of interior emulsion over a coat of primer complete all as specified and directed.

S &F Pre-painted galvalume zinc coating GI Based corrugated steel sheet of tile profile having TCT 0.45 mm thick, rib height 28 mm, 35 micron total paint coated thickness, min. G300 Mpa grade, weight not less than 4.9 kg/sq.m, pitch 200 mm with 16mm step depth, of colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteneres/screws as recommended by manufacturer complete all as specified and directed. Make: Tata bluescope/ Indian Ispat/ M/s Multi colour steel india Pvt. Ltd./Jindal or equivalent as approved by accepting officer

DELTA CONSTRUCTION CO

Arneja Builders

Buttar Construction Co.