COMPLETION OF INCOMPLETE WORKS IN RESPECT OF (PROVN OF COVERED SHED, CAR PARKING SHED AND CONSTRUCTION OF PLINTH AT SALVAGE AT FORT CANTT ALLAHABAD)

Amount

Surface dressing not exceeding 15 cm deep in soft/ loose soil, complete all spacified and directed.

Excavating in post holes (or similar holes) in soft/loose soil, each not exceeding 0.5 cu.m, getting out and making good surface in soft/loose soil, complete all specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, shafts, wells, cesspits, manholes etc. or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil, complete all as specified and directed.

Plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub bases of floors, complete all as specified and directed.

Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. NOTE :-Colour of galvalume sheet shall be got approved from GE in writing before procurement.

Pre- painted galvalume aluminium zinc coating GI based 600mm wide ridge plain steel sheet 0.50mm thick of any colour matching with roof sheet fixed having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. NOTE :-Colour of galvalume sheet shall be got approved from GE in writing before procurement.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

75mm thick plain cement concrete 1:2:4, type B- 2, (using 40mm graded crushed stone aggregate) as in wearing coat, laid in alternate bays complete and all as specified and directed.

50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in wearing coat laid in alternate bays, finished even and smooth using extra cement including laying of glass dividing strips 4mm thick and 45mm vide, complete all as specified and directed. Note: Glass dividing strips shall be measured and paid seperately under replacement item of this Sch.

Supply only glass dividing strips 45 mm wide & 4 mm thick inserted in position, conform to design, complete all as specified and directed.

75 mm thickness of concrete slab 65mm deep X 10mm wide forming contraction joints (dummy) filled with pre-formed bituminous filler and sealed with sealing compound, Grade ‘A’ , complete and all as specified and directed.

50 mm thick PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without using extra cement, including making joints 10 mm wide to the full depth of PCC at every 3 metres centre-to-center distance and at every change of direction and filling the same with & including provision of mixture of bitumen and sand mortar in 1:3 by weight, complete all as specified and directed.

15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces,finished even and smooth without using extra cement complete all as specified and directed.

35 mm thick (measured solid) pre-cast RCC jalli & pillars with cement concrete 1:2:4, type B-0( using 12.5 mm graded crushed stone aggregate), including all mouldings & frame, set in cement mortar 1:4 to precast pillars grooves and including reinforcement of 4mm dia annealed wire @ 100 mm c/c spacing on both side alongwith pillars decorative round dome type on top of size 75mm x 75 mm with reinforcement 4 mm dia annealed wire 4 Nos with stirrups 4 mm dia @ 150 mm c/c spacing and one number 8 mm dia TMT bar at centre complete all as specified and directed.

Applying two coat of cement based paint over a coat of cement primer on newly plastered surfaces of wall complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

vs construction

Agren Enterprises

M/S KESHRI WORKERS

Airways Enterprises

ANKIT SHIP REPAIRERS AND SUPPLIERS