WELCOME MAINTENANCE OF OMQ COMPOSITE MAINTENANCE AND

Amount

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.

S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair aluminium anodised barrel tower bolts of extruded section, 200 mm long complete.

S&F in repair aluminium anodised barrel tower bolts of extruded section, 150 mm long complete.

S&F in repair hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed with rubber beeding complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed with rubber beeding complete.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repair mild steel curtain rods with PVC lining 20mm dia complete all as specifed and directed.

S&F in repairs curtain brackets mild steel with PVC lining matching with the curtain rod complete all as specifed and directed.

S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers etc.

Material and labour in reapair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etccomplete.

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

M&L for Tuck welding in repairl not exceeding 2.5cm in length of metal n exc 6mm thick complete.

M&L for Running welding in repairs not exceeding 6mm thick of metal to be welded in existing items etc complete.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.

S&F flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm size complete.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair aluminium anodised barrel tower bolts of extruded section, 200 mm long complete.

S&F in repair Mild steel wardrobe hooks 150 - 200 mm length, complete.

S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete.

S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete.

S&F 150mm size in repair 7 lever super night latch single bolt, fixed in inside side of door shutter make godrej complete.

S&F in repair 17-19mm thick Prelaminated MDF Board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete.

S&F in repair12 mm thick MDF board, medium density, flat presseed fixed with screws to timber frame work etc complete.

S&F stainless steel magnetic catcher complete.

S&F telescopic channel of Mild steel in kitchen and warddrobe drawers of size of 30cm to 45cm in length fixed with screws etc complete.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, brass polished complete.

S&F continuous (piano) hinges 40mm wide, mild steel, bright finish or electrogalvanised complete.

S&F lever wardrobe lock,verticle type of 50mm in size complete.

S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings complete.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete.

S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repair two way fancy type mixer pillar tap hot and cold, 15mm dia size with Screwed down high pressure,screwed both ends for iron pipe or for unions and fixed complete.

S&F in repair brass chromium plated shower rose 125 mm size with swivel joints, fixed in repairs complete.

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.

S&F in repair Stainless steel plate rack of size 600x750x250mm fixed in repair complete.

S&F in repair Stainless steel plate rack of size 780x900x250mm fixed in repair complete.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc complete.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc complete.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 40 mm bore (minimum weight 690 gms) complete.

S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete.

S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete.

Labour only opening of air lock in toilets/ bath and kitchen of GI pipe of any dia but excluding fittings complete.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.

S&F Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.

S&F in repair Tubular towel rail 20mm dia, 600mm long of brass, chromium plated complete.

S&F in repair towel ring 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete.

Supply and fixing in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete.

Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

Supply and fixing(in Repair) vitreous china wash down water closet one piece (pedestal patterni)ivory with PVC sheet cover type & flushing cistern and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n exc 50m complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.

Supply and fixing (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete.

S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including refixing of WHB, steel painting and making good disturbed surface complete.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. Complete.

Supply & Fixing in Repairs PVC Syphon kit suitable for PVC Cistern complete

Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. Complete.

S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete.

S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples complete

Repair only to wall mixer of any make by replacing L-bends & connecting legs, nipples etc complete

S&F (in repairs) Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : s stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete. Note: Payment for providing grooves shall be made separately.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer complete.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted with roller brush over & including a coat of cement wash with white cement complete.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty complete.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted with roller brush complete.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of distamper oil emulsion complete.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete.

Demolition of brickwork built in cement or cement lime mortar complete.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and pigment including laiying over 30mm sand cousion complete all as specified and directed

All as above sl item no 102 item but except interlocking tiles complete.

M&L for 18-20mm thick Green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches. complete.

M&L for Non Skid ceramic tiles coloured 300mmx300mmx 7 to 8 mm thick(square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality) complete.

M&L for Non Skid ceramic tiles coloured 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for Non Skid ceramic tiles coloured 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).

M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete.

Demolition of concrete of any description and in any position complete.

Material and labour for PCC 1:2:4 using 20mm graded aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel of suitable size complete.

S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

S & F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

Supply and fixing in repair 110mm PVC (SWR) bends of any radius complete.

Supply and fixing in repair 75mm PVC (SWR) bends of any radius complete.

Supply and fixing in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete.

Supply and fixing in repair 110mm PVC (SWR) vent cowl complete.

Supply and fixing in repair 75mm PVC (SWR) vent cowl complete.

S&F UV plastic sheets including fixing with screws on wall make reoxlite complete.

All as per item No 121 above but except UV plastic sheetscomplete.

Supply and filling of Adhesive Silicon sealent in all types of windows/ Ventilator cill or in any gap/joint etc complete.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F in repair 15 mm fancy type stop valves, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed

M & L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of walls mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.

S&F in repair towel rack 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleatscomplete all as specified and directed. Make Prayag Cat No BA-42.

Fixing only in repair wash down water closet any pattern making minor repair like changing washer complete all as specified and directed .

M&L for ATT at points of contact of wood work by chemical emulsion (in old kerosene based solution) @ 0.5 Litre/hole by drilling 6 mm dia holes of a downward angle of 45 degree at 150 mm centre to centre and sealing to same.

Attending complaint and rectifying any type of fault in internal electrification such as decarbonising connection in the DBs checking for disconnections any burning due to over loading in DBs and restoring electric supply,checking and repair of switch sockets, MCBs any type, repair/replacement of tube light fitting, any type, by replacement of worn out ballast, bipin holder, starter, worn out wire, repair of faulty fan by disconnecting and replacement of worn out part such as capacitor, fan regulator, worn outwire, repair of lamp by replacement of worn out holder wire, earthing, repair replacement of electric bell/buzer/bell push and other internal accessories. which needs to serviceable the electric supply. Note :- (1). Contractor shall be provided necessary T&P such as ladder, Earth, tester, Insulation tester, drill machine during rectification fault and nothing extra shall be paid to him on this account (2). The cost of insulation tape shall be deemed to be included in the unit rate quoted against relevant item (3) Complaint will be attended immediately as and when noted day and night

(a) Description all as above in item No-129 here-in-before but location 4 AFSR

(b) Description all as above in item No-129 here-in-before but location Teacher Colony

(c) Description all as above in item No-129 here-in-before but Prayag Vihar

Supply and fix in repair Switch piano 6 amps, single pole, one way, 230 volts

Supply and fix in repairSwitch piano 16 amps, single pole, one way 230 volts

Supply and fix in repair Socket outlet 6 Amp 2pin & 3 pin, flush type

Supply and fix in repair Socket out let, 16 amp and 6 amp, flush type

Supply and fix in repair Electronic fan regulator 5 step 230 volts,switch type, make as per list from makes.

Supply and fix in repair Electronic fan regulator 5 step 230 volts, socket size module. make as per list from makes.

Supply and fix in repair Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings.

Supply and fix in repair Capacitor 230 volt, 2.5 Mfd for ceiling fans

Supply and fix in repair Capacitor 230 volt, 3.15 Mfd for ceiling fans

Supply and fix in repair Switch piano modular type, 230 volts, single pole, one way, 10 Amp, one module.

Supply and fix in repair Switch modular type, 230 volts, single pole, one way, 16 Amp one module.

Supply and fix in repair Socket out let 5 pin, 10 Amp, 230 volts modular type.

Supply and fix in repair Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type.

Supply and fix in repair Halogen dichroic lamp 230 volt 50 watt with reflector.

Supply and fix in repair two 2-way switch 240 volt

Supply and fix in repair modular type regulator as per existing 120 watt make as per list from makes.

Supply and fix in replacement calling bell ding dong type 220 volt 50 Htz

Supply and fix in replacement Switch socket combination 2 IN 1 3 PIN 6/16 Amp 220 Volt flush type.

Supply and fix in replacement of driver for 2x2 feet LED panel of 36 watt of any model any make as par existing 240 volt 50 Htz 120 watt/lumen 6500k/2700k make as per list from makes.

Supply and fix in replacement Rope light complete with adaptor. make as per list from makes.

Supply and fix in replacement driver/ballast suitable for LED light 18 Watt

Supply and fix in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 luumen/watt comprising driver locking arrangement prewired completely. make as per list from makes.

Supply and fix adore LED lamp 3 star rating 5 watt lumen out put 500 Lm all as specified and directed by Engr-in-Charge.

Supply and fix in replacement 18 Watt LED tube 4 pin type ultra bright LED PL-L with high efficacy suited for installation in existing 2G11 lamp holder Havells cat part No-PLL419TL18WLED865SPC of equivelent from list of makes.

Supply and fix wall mounted decorative facy type bedroom light LED type with frosted glass mounted on metalic frame with holder including 12 watt LED bulb Philips cat part No-45617 or equivelent from list of make.

Supply and fix in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair 10.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch make as per list from makes.

Supply and fix in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch make as per list from makes.

Supply and fix in repair PVC gang box ISI marked six module for mounting two 5 amp socket & three switch make as per list from makes.

Supply and fix in repair PVC gang box ISI marked 8 module for mounting three 5 amp socket & three switch

Supply and fix bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt Havells cat part No- Rugby Neon 10WLED760SSYMBOPC or equivalent from list of makes.

Supply and fix MCCB, four pole, 415 Volt ,100 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before. make as per list from makes.

Supply and fix MCB, tripple pole and neutral, 415 volts, 35 to 63 Amps rating, 10KA, "C" series fixed in DBs catered herein before. make as per list from makes.

Supply and fix in replacement MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before. make as per list from makes.

Supply and fix in replacement MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs catered herein before. make as per list from makes.

Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before. make as per list from makes.

Supply and fixing in repair Exhaust fan 300 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge

Supply and fixing in repair Exhaust fan 230 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as spd and directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230/300 mm size exhaust fan complete all as directed.

Supply and fixing in repair ventilating Fan 150 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair ventilating Fan 200 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair Ventilating Fan 250 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fix in repair wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.

M & L for in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

M&L for in replacement copper cable flexible 2 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

Abhinav Builders

M/s M A Traders