Plinth protection, pathways, other civil works, and assistance to day-to-day operation and maintenance of main WTP, assistance to day-to-day OandM of water distribution network, cleaning of water tanks, and allied works at various places under CWST

Select, Excess (+), Less (-) CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Select Not Applicable

Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited

Name of work: Plinth protection, pathways, other civil works, and assistance to day-to-day operation and maintenance of main Water Treatment Plant; assistance to day-to-day operation and maintenance of water distribution network, cleaning of water tanks, and allied works at various places under CWS Tadali NIT no.: CWTD-CIV-E-22-2025-26, S. No. 2

. Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department

ITC Not Available Works Contract Bidder's Status (Mandatory) Rate of GST (in %) Total GST (in ₹)

Name of the Bidder/ Bidding Firm / Company : Select 18

S. No. Item Description (Item no. 2 to 9.10 are Non-SOR items) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Basic rate in figures to be entered by the bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

SCHEDULE-B (Items from/ based on Standard Schedule of Rates): Item no. 1.01 to 1.47.50 - Excess(+) Full Conversion INR

Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department.

ISI marked screwed (threaded) heavy duty G.I. fittings including sockets, reducer sockets, elbows, bends, reducer elbows, tees, and unions for G.I. pipes of 15 mm to 80 mm diameter kg Excess(+) Full Conversion INR

Screwed (threaded) heavy duty G.I. fittings including nipples, clamps, flanges, and dummies for G.I. pipes of 15 mm to 80 mm diameter kg Excess(+) Full Conversion INR

Heavy duty plain CPVC fittings having thermal stability for hot & cold water supply, including sockets, reducer sockets, elbows, bends, reducer elbows, tees, and clamps for CPVC pipes of 15 mm to 25 mm diameter kg Excess(+) Full Conversion INR

Brass threaded heavy duty CPVC fittings having thermal stability for hot & cold water supply, including male thread adapters and female thread adapters for CPVC pipes of 15 mm to 25 mm diameter kg Excess(+) Full Conversion INR

Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 100 mm dia each Excess(+) Full Conversion INR

Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 150 mm dia. each Excess(+) Full Conversion INR

Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 200 mm dia each Excess(+) Full Conversion INR

Brass spindles (including check-nut) for valves, of specified diameter & length, without threading kg Excess(+) Full Conversion INR

Stainless steel spindles (including check-nut) for valves, of specified diameter & length, without threading kg Excess(+) Full Conversion INR

Heavy duty brass sprinklers with 360 degree adjustable rotation, range approx 6 mtrs (radius) each Excess(+) Full Conversion INR

Mirror finish C.P. brass two-way bib cock: 15 mm nominal bore each Excess(+) Full Conversion INR

Mirror finish C.P. brass fancy pillar cock with long nose/ long body of approved pattern: 15 mm nominal bore each Excess(+) Full Conversion INR

HDPE tank lids (with locking arrangement) for HDPE water storage tanks of all sizes each Excess(+) Full Conversion INR

ISI marked 5 HP, three-phase submersible pump-motor set of approved make & type, with head range up to 50 mtr, including ISI marked starter/ switch etc. all complete. The coil in the motor to be of copper. each Excess(+) Full Conversion INR

ISI marked 10 HP, three-phase submersible pump-motor set of approved make & type, with head range up to 100 mtr, including ISI marked starter/ switch etc. all complete. The coil in the motor to be of copper. each Excess(+) Full Conversion INR

L-225 star rubber spider coupling for water pumps each Excess(+) Full Conversion INR

Single ball bearing no. 6309 for water pumps each Excess(+) Full Conversion INR

Double ball bearing no. 3309 for water pumps each Excess(+) Full Conversion INR

C.I. foot valve, including nuts & bolts, for 100 mm suction for water pumps each Excess(+) Full Conversion INR

C.I. gland of same shape & size as per the existing 50 HP water pumps each Excess(+) Full Conversion INR

Gland packing rope of 14 mm or 12 mm size kg Excess(+) Full Conversion INR

Rubber washer (ghibli) for foot valves, matching the existing shape & thickness, for 100 mm suction for water pumps each Excess(+) Full Conversion INR

Rubber sheet of specified thickness (2 mm, 3 mm, etc.), for pipe joints etc. kg Excess(+) Full Conversion INR

Rubber washers for 15 mm taps each Excess(+) Full Conversion INR

Rubber seal for flushing cisterns of 32 mm flushing pipe each Excess(+) Full Conversion INR

Multipurpose sealant in semi-solid putty form (such as M-seal or equivalent) for sealing, joining, & fixing, in packs of 75-150 grams each kg Excess(+) Full Conversion INR

Pipe thread sealant in liquid form, in tubes/ packs of size 75-150 ml each litre Excess(+) Full Conversion INR

CPVC solvent adhesive (liquid) for joints in CPVC pipelines, in packs of size 100-250 ml each litre Excess(+) Full Conversion INR

12 mm wide teflon tape for sealing joints, in packs of size 10-15 mtrs each metre Excess(+) Full Conversion INR

Mild steel screws of various sizes kg Excess(+) Full Conversion INR

Stainless steel screws of various sizes kg Excess(+) Full Conversion INR

Brass screws of various sizes kg Excess(+) Full Conversion INR

C.P. brass screws of various sizes kg Excess(+) Full Conversion INR

3 Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, and stacking of serviceable & unserviceable materials at separate designated places within a lead of 100 metres, as per instructions of WCL. Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, pipelines, cables, etc., the work is to be done through manual means. Each worker must be equipped with the required safety gear/ accessories (gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.). The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (gardening scissors, axe, hasiya, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete. sqm Excess(+) Full Conversion INR

4 Threading of spindles (of brass or stainless steel) by mechanical means, as & when required, including cost of transportation. each Excess(+) Full Conversion INR

5 Painting insides of water tanks with suitable non-corrosive, lead-free, water-proof rubber paint of approved brand and manufacture to give an even shade : One or more coats. sqm Excess(+) Full Conversion INR

6 Letter-writing alongwith painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Colours/ shades to be as directed by the department. sqm Excess(+) Full Conversion INR

7 Assistance in day-to-day operation & maintenance of Water Treatment Plant and water distribution network at CWS Colony and also at other establishments such as Central Workshop premises, G.M. Office, Central Store, etc. The job includes: (A) Day-to-day assistance in repairing of pumps, valves, pipelines, water supply fittings, etc.; (B) Daily assistance in dozing of alum & bleaching powder; (C) Day-to-day assistance in shifting of various materials regarding water supply system at Water Treatment Plant and also at other places under CWS jurisdiction, as per requirement; (D) Day-to-day assistance in operation of various valves, as & when required; (E) Day-to-day assistance in operation of various pumps, as & when required; (F) Minor excavation works for repairing pipelines etc., as & when required; and (G) Other allied/ related works. Note: (i) All these jobs are to be carried out by the contractor as per instructions of the department; (ii) The contractor has to deploy trained, experienced, and suitable workers for the job. Shift timings & shift-wise deployment shall be as directed by the department and it may change from time-to-time. Providing leaves to the workers is the responsibility of the contractor and the contractor is also required to deploy suitable substitutes for the work. (iii) Daily attendance shall be maintained at the designated place. Each worker is required to carry an ID card of some government authority (aadhaar card, voter's card, driver's licence, PAN card, etc.). (iv) Each worker must be equipped with adequate safety accessories such as washable & reusable face masks (if & when required), gum-boots/ safety shoes, raincoats (depenfing upon season & weather), torchlights (depending upon shift timings), and washable & reusable hand gloves. They shall also be equipped with basic tools & equipment required for the jobs described above, such as phawada, tagadi/ghamela, gaiti, kulhadi, kudali, tools for operating valves, etc. All these accessories & tools are to be provided by the contractor in the rate of this item. (v) Water & electricity required for the work shall be made available by WCL, without any cost to be charged from the contractor.

Carrying out the above works (as described at S. No. 7) by deploying 2 trained, experienced, and suitable assistant fitters (semi-skilled) per day. Their weekly rest-days can be staggered by the department. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2. days Excess(+) Full Conversion INR

Carrying out the above works (as described at S. No. 7) by deploying 2 trained, experienced, and suitable workers (unskilled) per day. Their weekly rest-days can be staggered by the department. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2. days Excess(+) Full Conversion INR

8 Assistance for day-to-day sweeping, brooming, cleanliness, & housekeeping at Water Treatment Plant, except toilet & gardens. The job includes: (A) Daily sweeping & mopping of floors, cleaning of dado with wet cloth, removing spider webs from walls and ceilings, cleaning of doors, windows, & gates with wet cloth, cleaning & dusting of wire mesh, etc.; (B) Daily dusting/ cleaning (with dry or wet cloth as per requirement) of tables, chairs, and other similar furniture items; (C) Daily sweeping & brooming at the locations open to sky; (D) Cleaning of roofs & chhajjas by sweeping & brooming, as & when required; (E) Removing grass, weeds, & minor shrubs, if any, from walls, chhajjas, roofs, etc., as & when required; (F) Daily collection of garbage at designated points and putting it on garbage vehicle of the Colony; (G) Housekeeping jobs such as shifting of various objects etc., as & when required; and (H) Other allied jobs related to sweeping, brooming, cleanliness, & housekeeping. Note: (i) All these jobs are to be carried out by the contractor as per instructions of the department; (ii) The contractor has to deploy 2 trained, experienced, and suitable workers for the job in general shift. However, shift timings can be occasionally changed by the department as per requirement. The weekly rest-days of the workers can be staggered by the department. Providing leaves to the workers is the responsibility of the contractor and the contractor is also required to deploy suitable substitutes for the work. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2. (iii) Daily attendance shall be maintained at the designated place. Each worker is required to carry an ID card of some government authority (aadhaar card, voter's card, driver's licence, PAN card, etc.). (iv) Each worker must be equipped with adequate safety accessories such as washable & reusable face masks (if & when required), gum-boots/ safety shoes, raincoats (depenfing upon season & weather), torchlights (depending upon shift timings), and washable & reusable hand gloves. They shall also be equipped with basic tools & equipment required for the jobs described above, such as phawada, tagadi/ghamela, etc. All these accessories & tools are to be provided by the contractor in the rate of this item. (v) Other tools & consumables (such as brooms, detergent, etc.) required for cleaning job shall be supplied by the contractor (details, quantities, & costs covered separately in item no. 9). Water & electricity shall be made available by WCL without any cost to be charged from the contractor. days Excess(+) Full Conversion INR

9 Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department.

Washing powder of superior quality and approved brand kg Excess(+) Full Conversion INR

Scented phenyl (floor cleaner) of superior quality and approved brand litre Excess(+) Full Conversion INR

Glass cleaner liquid of superior quality and approved brand litre Excess(+) Full Conversion INR

Hard broom of minimum 4 feet length, of superior quality each Excess(+) Full Conversion INR

No dust soft broom of minimum 1 mtr length, of superior quality each Excess(+) Full Conversion INR

Rubber mop with steel handle of minimum 4 feet length, of superior quality each Excess(+) Full Conversion INR

Mop with microfibre twist of minimum 4 feet length, of superior quality each Excess(+) Full Conversion INR

PVC bucket of at least 20 litres capacity each, of superior quality each Excess(+) Full Conversion INR

PVC mug of at least 1 litre capacity each, of superior quality each Excess(+) Full Conversion INR

PVC/ rubber flexible pipe of 20 mm internal diameter, of superior quality mtr Excess(+) Full Conversion INR

10 Total impact of GST for the purpose of CTC 0.000 Nos Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited

Name of work: Plinth protection, pathways, other civil works, and assistance to day-to-day operation and maintenance of main Water Treatment Plant; assistance to day-to-day operation and maintenance of water distribution network, cleaning of water tanks, and allied works at various places under CWS Tadali NIT no.: CWTD-CIV-E-22-2025-26, S. No. 2

Name of the Bidder/ Bidding Firm / Company :

S. No. Item Description (Item no. 1.01 to 1.10 & 1.12 to 1.46 are from CPWD DSR-2021; Item no. 1.11 & 1.47 are based on CPWD DSR-2021) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Items from/ based on Standard Schedule of Rates:

Item code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum Excess(+) Full Conversion INR

Item code 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. cum Excess(+) Full Conversion INR

Item code 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum Excess(+) Full Conversion INR

Item code 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). cum Excess(+) Full Conversion INR

Item code 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). cum Excess(+) Full Conversion INR

Item code 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum Excess(+) Full Conversion INR

Item code 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. sqm Excess(+) Full Conversion INR

Item code 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum Excess(+) Full Conversion INR

Item code 5.22.6 & 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or More. kg Excess(+) Full Conversion INR

Item code 6.34.2 - (6.4.2 - 6.1.2) Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand). cum Excess(+) Full Conversion INR

Based on item code 6.34.2 of CPWD DSR-2021 Brickwork with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor two level in: Cement mortar 1:6 (1 cement : 6 coarse sand). cum Excess(+) Full Conversion INR

Item code 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm Excess(+) Full Conversion INR

Item code 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges. sqm Excess(+) Full Conversion INR

Item code 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum Excess(+) Full Conversion INR

Item code 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg Excess(+) Full Conversion INR

Item code 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm Excess(+) Full Conversion INR

Item code 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). metre Excess(+) Full Conversion INR

Item code 10.13.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). kg Excess(+) Full Conversion INR

Item code 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg Excess(+) Full Conversion INR

Item code 10.5.2 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. sqm Excess(+) Full Conversion INR

Item code 15.41 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. sqm Excess(+) Full Conversion INR

Item code 12.65.2 Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.71 mm Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm. sqm Excess(+) Full Conversion INR

Item code 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). sqm Excess(+) Full Conversion INR

Item code 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). kg Excess(+) Full Conversion INR

Item code 22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). cum Excess(+) Full Conversion INR

Item code 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per bag of cement 50 kg Excess(+) Full Conversion INR

Item code 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. sqm Excess(+) Full Conversion INR

Item code 11.21.1.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. sqm Excess(+) Full Conversion INR

Item code 11.21.2.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. sqm Excess(+) Full Conversion INR

Item code 11.20.4 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment. sqm Excess(+) Full Conversion INR

Item code 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). sqm Excess(+) Full Conversion INR

Item code 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). sqm Excess(+) Full Conversion INR

Item code 13.18 Neat cement punning. sqm Excess(+) Full Conversion INR

Item code 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand). sqm Excess(+) Full Conversion INR

Item code 14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). sqm Excess(+) Full Conversion INR

Item code 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. metre Excess(+) Full Conversion INR

Item code 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. sqm Excess(+) Full Conversion INR

Item code 13.41.1 - item code 13.85.3 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete: Two or more coats, excluding priming coat. sqm Excess(+) Full Conversion INR

Item code 13.81.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats). sqm Excess(+) Full Conversion INR

Item code 13.47.1 - item code 13.85.3 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm, excluding priming coat). sqm Excess(+) Full Conversion INR

Item code 13.112.2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm Excess(+) Full Conversion INR

Item code 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. sqm Excess(+) Full Conversion INR

Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. sqm Excess(+) Full Conversion INR

Item code 14.75A Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). Note: This job is to be done twice in the contract period (at approx half-yearly intervals). The unit rate is for each time. litre Excess(+) Full Conversion INR

Item code 14.78 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. Note: This job is to be done twice in the contract period (at approx half-yearly intervals). The unit rate is for each time. sqm Excess(+) Full Conversion INR

Item code 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. cum Excess(+) Full Conversion INR

1.47 Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department.

1.47.01 Based on item code 0593 of CPWD DSR-2021 C.P. Brass Extension Nipple (1/2"x2" size) each Excess(+) Full Conversion INR

1.47.02 Based on item code 1034 of CPWD DSR-2021 Bolts and nuts up to 300 mm in length quintal Excess(+) Full Conversion INR

1.47.03 Based on item code 1219 of CPWD DSR-2021 M.S. Wire nails kg Excess(+) Full Conversion INR

1.47.04 Based on item code 1339 of CPWD DSR-2021 Brass bib-cock 15 mm dia each Excess(+) Full Conversion INR

1.47.05 Based on item code 1342 of CPWD DSR-2021 Brass stop-cock 15 mm dia each Excess(+) Full Conversion INR

1.47.06 Based on item code 1464 of CPWD DSR-2021 S & S.C.I. standard specials upto 300 mm dia (heavy class) quintal Excess(+) Full Conversion INR

1.47.07 Based on item code 1545 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 15 mm dia metre Excess(+) Full Conversion INR

1.47.08 Based on item code 1546 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 20 mm dia metre Excess(+) Full Conversion INR

1.47.09 Based on item code 1547 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 25 mm dia metre Excess(+) Full Conversion INR

1.47.10 Based on item code 1548 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 32 mm dia metre Excess(+) Full Conversion INR

1.47.11 Based on item code 1549 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 40 mm dia metre Excess(+) Full Conversion INR

1.47.12 Based on item code 1550 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 50 mm dia metre Excess(+) Full Conversion INR

1.47.13 Based on item code 1551 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 65 mm dia metre Excess(+) Full Conversion INR

1.47.14 Based on item code 1552 of CPWD DSR-2021 ISI marked medium class G.I. pipes with screwed ends: 80 mm dia metre Excess(+) Full Conversion INR

1.47.15 Based on item code 1649 of CPWD DSR-2021 ISI marked Polyethylene water storage tank with cover and suitable locking arrangement per litre Excess(+) Full Conversion INR

1.47.16 Based on item code 1878 of CPWD DSR-2021 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia each Excess(+) Full Conversion INR

1.47.17 Based on item code 1881 of CPWD DSR-2021 Spun yarn kg Excess(+) Full Conversion INR

1.47.18 Based on item code 1922 of CPWD DSR-2021 H.P. or L.P. ball valve (brass) with polythene floats: 15 mm dia each Excess(+) Full Conversion INR

1.47.19 Based on item code 1923 of CPWD DSR-2021 H.P. or L.P. ball valve (brass) with polythene floats: 20 mm dia each Excess(+) Full Conversion INR

1.47.20 Based on item code 1924 of CPWD DSR-2021 H.P. or L.P. ball valve (brass) with polythene floats: 25 mm dia each Excess(+) Full Conversion INR

1.47.21 Based on item code 1926 of CPWD DSR-2021 ISI marked 20 mm dia Gunmetal gate valve with wheel each Excess(+) Full Conversion INR

1.47.22 Based on item code 1927 of CPWD DSR-2021 ISI marked brass full way valve with C.I. wheel (screwed end) 25 mm dia each Excess(+) Full Conversion INR

1.47.23 Based on item code 1928 of CPWD DSR-2021 ISI marked brass full way valve with C.I. wheel (screwed end) 32 mm dia each Excess(+) Full Conversion INR

1.47.24 Based on item code 1929 of CPWD DSR-2021 ISI marked brass full way valve with C.I. wheel (screwed end) 40 mm dia each Excess(+) Full Conversion INR

1.47.25 Based on item code 1930 of CPWD DSR-2021 ISI marked brass full way valve with C.I. wheel (screwed end) 50 mm dia each Excess(+) Full Conversion INR

1.47.26 Based on item code 1932 of CPWD DSR-2021 ISI marked brass full way valve with C.I. wheel (screwed end) 80 mm dia each Excess(+) Full Conversion INR

1.47.27 Based on item code 3311 of CPWD DSR-2021 ISI marked C.I. sluice valve (with caps) class II : 100 mm dia each Excess(+) Full Conversion INR

1.47.28 Based on item code 3317 of CPWD DSR-2021 ISI marked C.I. sluice valve (with caps) class II : 150 mm dia each Excess(+) Full Conversion INR

1.47.29 Based on item code 3320 of CPWD DSR-2021 ISI marked C.I. sluice valve (with caps) class II : 200 mm dia each Excess(+) Full Conversion INR

1.47.30 Based on item code 4002 of CPWD DSR-2021 Stainless steel bolts/square bar and plates kg Excess(+) Full Conversion INR

1.47.31 Based on item code 7122 of CPWD DSR-2021 CP Brass Single lever telephonic wall mixer of approved make each Excess(+) Full Conversion INR

1.47.32 Based on item code 7257 of CPWD DSR-2021 C.P. Brass bibcock 15 mm each Excess(+) Full Conversion INR

1.47.33 Based on item code 7258 of CPWD DSR-2021 C.P. Brass long nose bibcock 15 mm each Excess(+) Full Conversion INR

1.47.34 Based on item code 7259 of CPWD DSR-2021 C.P. Brass long body bibcock 15 mm each Excess(+) Full Conversion INR

1.47.35 Based on item code 7260 of CPWD DSR-2021 C.P. Brass stop cock (concealed) 15 mm each Excess(+) Full Conversion INR

1.47.36 Based on item code 7261 of CPWD DSR-2021 C.P. Brass angle valve 15 mm each Excess(+) Full Conversion INR

1.47.37 Based on item code 7400 of CPWD DSR-2021 15 mm PTMT bib cock each Excess(+) Full Conversion INR

1.47.38 Based on item code 7403 of CPWD DSR-2021 15 mm dia PTMT stop cock (male thread) each Excess(+) Full Conversion INR

1.47.39 Based on item code 7407 of CPWD DSR-2021 PTMT push cock 15 mm dia each Excess(+) Full Conversion INR

1.47.40 Based on item code 7416 of CPWD DSR-2021 ISI marked C.I. double acting air valve 80 mm each Excess(+) Full Conversion INR

1.47.41 Based on item code 7495 of CPWD DSR-2021 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each Excess(+) Full Conversion INR

1.47.42 Based on item code 7496 of CPWD DSR-2021 PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each Excess(+) Full Conversion INR

1.47.43 Based on item code 7697 of CPWD DSR-2021 ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia metre Excess(+) Full Conversion INR

1.47.44 Based on item code 7699 of CPWD DSR-2021 ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia metre Excess(+) Full Conversion INR

1.47.45 Based on item code 7700 of CPWD DSR-2021 ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia metre Excess(+) Full Conversion INR

1.47.46 Based on item code 7710 of CPWD DSR-2021 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300 mm dia quintal Excess(+) Full Conversion INR

1.47.47 Based on item code 7858 of CPWD DSR-2021 P.T.M.T. Urinal cock 15 mm dia each Excess(+) Full Conversion INR

1.47.48 Based on item code 8636 of CPWD DSR-2021 ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia, having thermal stability for hot & cold water supply metre Excess(+) Full Conversion INR

1.47.49 Based on item code 8637 of CPWD DSR-2021 ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia, having thermal stability for hot & cold water supply metre Excess(+) Full Conversion INR

1.47.50 Based on item code 8638 of CPWD DSR-2021 ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia, having thermal stability for hot & cold water supply metre Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information