A/R and M/O various Type - I ,II,III,IV,V,VI GAD Residential qtrs

Steel work welded in built up sections, framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work. MS Hollow pipe

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:3:6 one cement : 3sandcoarse sand) : 6graded stone aggregate 20 mm (twenty milimetre) nominal size)

Chequerred precast cement concrete tiles 20 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc complete, on 20 mm thick bed of cement mortar 1:4 (One cement: Four coarse sand)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i)Light shade pigment using white cement.

Providing and laying rectified Glazed Ceramic tiles floor tiles of size 300x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

providing and fixing pvc sheet gutter 30cm wide 120cm over all box type jointing with screws and nails making necessary connections with rain water pipe

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre)gap for thermal expansion including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge (i) Single socketed pipes . (i)75 mm (Seventy five milimetre) diameter.

providing and fixing pvc clamps for gutter / rain water pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

proiding and fixing pvc end cap for rain water pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

providing and fixing pvc Shoe for rain water pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ACP sheet (4mm thick) in aluminium door,wiondow, ventilator shutters and partition with PVC/Neoprehs gasket etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 75 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)75 mm dia.

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 75mm dia.

Provdiing and fixing polycarbonated sheet 1.50mm thick in lining with galvanised self driven screws complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:4 (one Cement: Four Sand).

Providing and fixing cussion for sety 10mm thick including cover and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing channel for drawer telecopy 24 " long size including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing Zero degree hinges along with dadu hinges including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing over head sower with provision for connection for exposed shower pipe with connecting including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make Jaqver Prime.

Providing and fixing stainless clamps for partation of toilets grass including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting one coats(excluding priming coat) on previously painted wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping . including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly leaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Scaffolding in building side including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Disposal of muck / disposed materials upto all leads and lifts up to site approved by MC Shiumla

Painting with synthetic enamel paint (Steel paint) of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) Two or more coats on old work