REPAIR TO TILLING, PLASTERING, TOILET, KITCHEN, CUPBOARD, SANITARY FITTINGS AND VENT PIPE CI/CPVC PIPES AND INTERNAL WATER SUPPLY IN JCOS/ ORS MD ACCN AT KB LINE, MP LINE ETC UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for non skid ceramic coloured tiles (Premium quality) (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles etc including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 10mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick fixed on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 on brick wakk or concrete surfaces complete all as specified and directed.

Demolition of brick work or stone masonry including all quoins, arches, pillars etc built in CM complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified & directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

Material & labour 10 mm thick rendering in CM 1:4 concrete surfaces of ceiling etc, finished surfaced even & smooth without using extra cement complete all as specified & directed.

Material and labour for RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves including demoliton of RCC of any description, in any position, complete all as specified and as directed. (Note : Reinforcement shall be measured and paid separately under relevant)

Material and labour TMT bar 10 mm and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

Form work to edges of concrete flats sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified & directed.

M&L for two coats of OBD over a coat of average 2 mm thick wall care putty on newly plastered surfaces of walls complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed.

Materials and Labour for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing stone slabs and tiles of any description or thickness, laid, bedded in any mortar complete all as specified and directed.

Cutting chases, pinning in brick/stone walling / RCC and making good by CM 1:3 or PCC 1:2:4 12.5 mm graded aggregate for inserting bituminous tar felt cutting /tubing not exc 10 cm girth complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 (40 mm graded stone aggregate) as in foundation filling and mass concrete or sunken etc complete all as specified & directed.

M&L for 15mm thick plastering in CM 1:4 on floor with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound complete all as specified & directed.

M& L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC as per manufacture's instruction complete all as specified & directed.

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) Applying bitumen primer @ 0.40 Kg/Sqm. (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 kg/Sqm with 100 GSM/Sqm non woven polyster mat as centre core reinforcement , laid with 75mm side over lap and 100mm end over lap sealed and finsihed neat. (iii) 40mm bore GI pipe for Spout pipe length 0.75m.

S & F in repair for 500 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC Float valve 20mm bore, Tank cover, wash out and overflow pipe necessary tank nipples complete all as specified & directed.

S & F in repair for 1000 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC float valve 20mm bore, tank cover, wash out pipe, overflow pipe, tank nipple complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing/CPVC pipe including fittings and connections, including cleaning for Refixing or removal to store complete all as specified & directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S& F 20 mm outer dia of CPVC pipes SDR 11 & plain CPVC pipes SDR 11 fitting on wall, floor and ceiling etc complete all as specified & directed.

S&F 20 mm outer dia of CPVC brass elbow fixing to CPVC pipes on any location and position etc complete all as specified & directed.

S& F 20 mm outer dia of CPVC brass Tee fixing to CPVC pipes on any location and position etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified & directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

S & F 15mm to 20mm male Brass Threaded Adaptor (MTA/ MBTA) ) pipes any location complete all as specified & directed.

S & F 15mm to 20mm female Brass Threaded Adaptor (FTA/ FBTA) ) pipes any location complete all as specified & directed.

S&F in repair 20 mm dia PVC float Valves high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified & directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets , CP waste coupling and 32 mm pvc flexible waste pipe 800 mm long etc complete all as specified & directed.

S&F in repair Low density polyethylene (LDPE) pipes 32 mm of pressure rating 6 kgf/Sq cm & 800 mm long including elbow complete all as specified & directed.

S&F in repair Pillar taps cast copper alloy with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified & directed.

S&F in repair stop cock, (Concealed type) cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified & directed.

Supply and fixed in repair angular valve , 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F in repair bib taps cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S&F in repair long body bib taps cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

Supply and fix in repair for 15mm Bib Cock (PTMT) , screwed for steel pipes, fixed in repairs, complete all as specified & directed.

Supply and fix in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)), complete all as specified & directed.

S&F in repairs 10litres capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified & directed.

S & F in repairs, CP Waste coupling (half or full threaded) 40 mm dia of discharge pipe suitable for stainless steel sink complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

S & F in repair CI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturb portion complete all as specified & directed.

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturb portion complete all as specified & directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flushing cistern ) and making good to disturbed surface of floor all fixed as in repair all as specified and directed.

S & F in repair of plastic wc seat cover and mild steel chromium plated or aluminised hinging device as etc complete all as specified and directed.

S & F in repairs health faucet (ABS body) mild steel Chromium Plated suitable for 15mm dia pipe 1.25m long flexible tube and ABS wall hook including making connection and fixed in position for pedestal pattern WC incl complete all as specified & directed.

S&F in repairs CP Soap dish 100mm dia fixed with cp screws etc complete all as specified & directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm complete all as specified and directed .

Supply and fix in repair 15mm bore Basin mixture for mixing hot and cold water, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

Supply and Fix in repairs, brass CP two in one wall mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed, complete all as specified and directed.

Supply and fix in repair 15mm bore Sink mixture for mixing hot and cold water, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

Supplied and fixed in repair set of 10 mm thick glass corner shelf set of 3 Nos (size 200 mm, 250mm & 300 mm) complete all as specified and as directed.

S&F in repairs plate rack of stainless steel , 1mm thick for kitchen or labotary, overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified & directed.

Supply and fix in repair grating doom round with waste hole/ without hole, 125mm size of PTMT, (min weight 40 gms) complete all as specified and directed.

Supply and fix in repair grating doom round with waste hole/ without hole, 100mm size of PTMT, (min weight 25 gms) complete all as specified and directed.

Taking down & refixing EWC Vitreous China/Cistern after necessary repair work including connection to P/S trap, seat cover, flushing cistern, flush pipe etc complete all as specified & directed.

Taking down carefully & refixing WHB Vitreous China after necessary repair work including connection to taps waste fittings etc complete all as specified and directed.

Taking down Rain water pipe of any size or pattern (CI/PVC / AC pipe ) including all fittings etc complete all as specified & directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified & directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floor or in trenches including making good disturb portion to match the existing complete all as specified & directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified & directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified & directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified & directed.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturbe portion to match the existing complete all as specified & directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified & directed.

S&F in repair clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified & directed.

S&F in repair clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 75 mm bore pipe complete all as specified & directed.

S&F in repair 3mm thick ordinary quality sheet glass n.exc 0.5 sqm each but figured glass fix in ventilation, pin head type complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified & directed.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed.

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified & directed.

Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S & F in repair 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Cheluka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified & directed.

S & F width of flap 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised including all neccessory fittings complete all as specified & directed.

S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified & directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified & directed.

S&F 150 mm long brass handles, cast type polished bright complete all as specified and directed.

S&F 75 mm long brass handles, cast type polished bright complete all as specified and directed.

M/s Om Infracon (BID ID -3068825)

Mahendra Enterprises (BID ID -3064817)

Balaji Associates (BID ID -3064553)

VARDMAN ENTERPRISES (BID ID -3066929)

VASUNDHARA AND COMPANY (BID ID -3065826)

Attar Singh and Sons (BID ID -3068492)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3064934)

M/s Laxmi Associate (BID ID -3067727)

3Krishna Enterprises (BID ID -3066986)