REPAIR REPLACEMENT OF CONVENTIONAL LIGHTS WITH LED FITTING AND ADDN ALTN OF INTERNAL WIRING IN P-03 P-04 P-64 P-22 AT HQ DGIS UNDER AGE EM OF GE SOUTH DELHI CANTT10

Amount

Taking down carefully the old u/s aluminium/copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for point wiring multi stranded complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified & as directed Notes :- 1. New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area including taking down/refixing of e-board and the rates are inclusive of quoted rates. 2. At roof slab where there is burnt/blockage in the existing conduit wiring will be done through PVC conduit and rate are inclusive in above quoted item.

All as per Srl item No.2 above, but for one light /fan/Bell point/security light controlled by one way switch.

All as per Srl item No.2 above, but for one 3 pin socket outlet 5 amps on same board.

All as per Srl item No.2 above, but for one 3 pin socket outlet 5 amps point independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

All as per Srl item No.2 above, but for one 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

All as per Srl item No.2 above, but for one 3 pin socket outlet, 15 amps on independent board with cable 4 Sqmm for main current and 4 sqmm as earth wire as AC point.

S&F Switch modular type, 1 Module, 6 Amps one way complete all as specified and as directed.

S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and as directed.

S&F Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and as directed.

S&F Switch modular type 1M, 16 Amp with red indication light complete all as specified and as directed.

S&F AC socket with MCB 20 Amp complete with metal box and 3 Pin top plug complete all as specified and as directed. Note:- Rates are inclusive of cutting/chases for mounting metal box on wall and making good the disturbed surfaces with OBD/Colour wash/ white wash and wall care putty etc., where ever required.

S&F Electronic fan regulator, modular type 2M, 4 steps complete all as specified and as directed.

M&L for point wiring multi stranded complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed PVC conduit with sunken pressed steel terminal boxes 2mm thick of required size with all accessories including 1.5 sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and as directed. Notes :- 1. New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area including taking down/refixing of e-board and the rates are inclusive of quoted rates. 2. At roof slab where there is burnt/blockage in the existing conduit wiring will be done through PVC conduit and rate are inclusive in above quoted item.

All as per Srl item No.09 above, but for one light /fan/Bell point/security light controlled by one way switch.

All as per Srl item No.09 above, but for one 3 pin socket outlet 5 amps on same board.

All as per Srl item No.09 here-in-before, but for one 3 pin socket outlet 5 amps on independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire.

All as per Srl item No.09 above, but for 3/6 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire as power point”

All as per Srl item No.09 above, but for One 3/6 Pin socket outlet, 20 Amp on independent board with cable 4 Sqmm for main current and neutral and 4 Sqmm as earth wire as AC point cable 4 Sqmm for main current and 4 sqmm as earth wire as power point.

S&F switch piano, flush type, 5 Amps, single pole, one way complete all as specified and as directed.

S&F socket outlet, flush type, 5 Amps complete all as specified and as directed.

S&F switch piano, flush type 15 Amps single pole, one way complete all as specified and as directed.

S&F socket outlet, flush type 15 Amps complete all as specified and as directed.

S&F fan regulators, switch/socket type for ceiling fan 1200mm sweep, 240V complete all as specified and as directed.

S&F in repairs surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for not less than 20W LED light housing. Fixture should have minimum system lumen of 2000lm & minimum efficacy at system level >=95lumens/Watt, life of fixture 25K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<20% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and as directed.

S&F in repairs of wall mounted LED Integrated Batten not less than 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type complete all as speficied and as directed.

S&F in repairs recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light /warm light and glare free symetrical ilIumination suitable for fixing on ceiling of RCC/POP/e-board with wedge bracket to fix in existing ceiling/e-board in repairs of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP/e-baord ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.

All as per Srl item No.17 above, but 40 watt 1' x 4'.

All as per Srl item No.17 above, but 18 watt 1' x 1'.

S&F in repairs battan holder PVC insulated body complete all as specified and as directed.

S&F in repairs LED lamp 12 Watt recharable complete all as specified and as directed.

S&F in repairs of LED slim panel light 12/15W down light square/round type as per sample complete all as specified and as directed

S&F in repairs LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz as per sample complete all as specified and as directed.

S&F in repairs ceiling rose surfaces minimum size 65x50mm with two/ three terminals complete all as specified and as directed.

Supply & Fixing in repairs of sheet metal enclouser TPN 6 way for MCB 63 Amp, TPN of incomer, double door DB, IP-54, bus bar, neutral link , earth bar and din rail complete all as specified and as directed.

Supply & Fixing in repairs of on distribution board in repairs of MCCB 200 Amps, 4 pole, 415 Volts with 36kA including electrical connection with appropriate size of aluminium lugs and insulation packing complete all as specified and as directed.

S&F in repairs MCB TPN 63 Amps 415 volts, 'B' Series 10 KA as per site requirement and complete all as specified and as directed.

S&F in repairs MCB SP 'B' curve 06 to 32 Amps 240 Volts, 10 kA including electrical connection with suitable size of thimble complete all as specified and as directed.

S&F in repairs LED building security light 40 Watts inclduing new bracket complete all as specified and as directed.

M&L in repairs Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC 1:2:4, type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 1:2:4, 40mm thick, type B-1 using 20mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering, all as shown in Electrical Plate No.05 of SSR-2009 (Part-I) and connected to earth test point including testing etc. complete all as specified and as directed.

S&F in repairs earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate dsituation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Taking down unserviceable sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and as directed.

M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through and including PVC conceiled conduit of size 25mm dia complete all as specified and as directed. Notes:- (i) Phase should be Red/Yellow/Blue, Neutral should be Black and Earthing wire should be of Green colour. Two runs of cable for 3 phase, neutral and one run of earth wire will be measured and paid as one unit length. (ii) The rates are inclusive of cutting/chasing and making good the disturbed surfaces with CM 1:3 and with OBD/Colour wash/white wash etc. as per existing complete.

M&L for submain wiring of Three runs of 10 Sqmm size for main cable and one run of 10 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and as directed.

M&L for submain wiring of Three runs of 16 Sqmm size for main cable and one run of 16 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and as directed. Note for ser No 34 to 35 (a) Three runs of main cable and one run of earth cable all together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area including taking down/refixing of e-board and the rates are inclusive of quoted rates.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

PARADISE INFRA POWER COMPANY

M/s Durga Traders

M/s S.G. BUILDERS

ACR ENTERPRISES

Grid Infratech Pvt Ltd

POONAM ENTERPRISES

Bidder Name

POONAM ENTERPRISES