Construction of Girls Hostel Building (G plus 3 Floors) for Madras Veterinary College Hostel campus at Vepery in Chennai city

Earth work excavation in all soils (including refilling) a) 0 to 2 mt.

Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

Providing Anti-termite treatment to soil

Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness

Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method

Wet Mix Macadam (Table 400-13) including premixing the Material with water at OMC in mechanical mix plant carriage of mixed

Filling with Excavated Earth

Supplying and filling stone dust

Supplying and filling in foundation and basement with gravel in layers of 150mm thickness

Supply and filling with Quarry Rubbish in layers of 150mm thickness

Supplying and laying of Rubber moulded hydraulic pressed Paver blocks following thick b) 83mm thick Paver block

Bored cast in situ piles Installation of vertical cast in situ bored piles of following dia using Standardised Concrete Mix M-30 Grade b.600mm dia pile

Chipping of RCC pile head of 500mm Dia of pile to the required cut off level and clearing away the debris from site with an average lead of 5 km etc. b.600mm dia pile

Mobilization Charges inclusive of Transportation to site assembling and Dismantling the rotary pile equipment employed for the works etc.

Conducting Routine vertical compression load test for bored cast in situ RCC piles

Plain cement concrete 1:5:10 for Foundation & Basement

Plain cement concrete 1:2:4 for Foundation & Basement and other similar works

Precast cement concrete Jally ventilator using standardised concrete mix M30 (without vibrating charges) 50mm thick a. In Ground floor

b. In First floor

c. In Second floor

Supplying and laying of 100mm dia GI Pipes (MEDIUM) AS PER IS 1239/PART I/2004 a) Below GL

Providing and laying in position, Standardised Concrete Mix M-30 Grade a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f. In Fourth floor

Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth Precast slab Standardised Cement concrete M 30 grade a). Providing pit

b) Augering 30cm dia

Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6

Providing Rain Water Harvesting well ring in circular shape of 90cm dia, 60cm depth (30cm depth 2 Nos) 50mm thickness using standardised concrete mix M20 grade using 20mm HBSJ

Brick work in CM 1:5 using chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5 cm) a) Foundation and basement

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

Brick partition wall in Cement Mortar 1:4 114mm thick for super structure in the following floors using chamber burnt bricks of size 9”x4¼”x3” (23x11.4x7.5cm) a. In Foundation and basement

Brick partition wall in Cement Mortar 1:4 75mm thick for super structure in the following floors using Chamber burnt bricks of size 9”x 4½”x 3” (23 x 11.4 x 7.5cm) b) In Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

Autoclaved Aerated 100mm Thick Block Masonry: (Partition wall) Supplying & constructing of Autoclaved CellularAerated Concrete (AAC) block masonry using blocks having dimensions of 600x200mm and thickness 100 mm of density 600 Kg / m³ a) In Stilt / Ground Floor

b) In First Floor

c) Second Floor

d) In Third Floor

Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make

Flooring with a bed of CC 1:5:10 using 40mm size hard broken stone jelly

Plastering the top of flooring in CM 1:4, 20 mm thick

Finishing the top of flooring with cement concrete 1:3, 20 mm thick Ellispattern Flooring (No Sand)

Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand)

Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3

Supplying and fixing of Colour glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick

Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler).

Providing single nosing to the edges of Granite slab of 10 mm thick

Supplying and fixing of Ruby Red / Raw silk colour Granite Tiles (superfine polished with machine cut edges) of required sizes of 10 mm thick for wall cladding

Supplying and laying of polished shahabad slab /stone, 20mm thick with machine cut edges of size 2'x'2' below (Grey colour) of approved qualty for florring in CM 1:3

Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring C.M 1:3, 20mm thick

Supply and laying of superior variety Concrete Designer tiles for flooring in CM 1:3

Supplying and fixing of Colour matt finish floor Tiles of size 305x305mm (12"x12") for flooring and other similar works (Best approved superior quality

Formwork using M.S.Sheet a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b) Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

c) For Square and rectangular columns and small quantities

d) Vertical wall

f) Curved surface

g) Double centering portico area

Providing additional Strutting to centering of R.C.C slab and beams of all surfaces or any other form works

Plastering in C.M. 1:5, 12 mm thick

Plastering in C.M. 1:4, 12 mm thick

Special ceiling plastering in cement mortar 1:3, 10 mm thick

Plastering with CM 1:3, with 12 mm thick mixed with water proofing compound (CICO) at the rate of 2 kg / 10 sq.m

Plastering in CM 1:5, 12mm thick for border finish in all floors a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

Painting - New "wood work"

Painting - New "iron work"

Painting primer coat using approved quality of white cement over the cement plastered / concrete wall surfaces,ceiling or other similar works

Providing two coats of Plastic Emulsion paint including primer for inner walls

Providing two coats of Exterior Emulsion paint including primer for outer walls

Teak wood Wrought & Put up a) T.W. over 2 m & below 3 m

b) T.W. below 2 m length.

Supply and fixing of Magnetic door catches

M.S.Holdfast

Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side.

Supplying and fixing of PVC Sliding Door with Roller

Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

Supplying and fixing in position of UPVC window of casement type( open) for all sizes

Supplying and fixing of Best Indian Teakwood Panelled door shutters Double leaf in position using 75mm x 37.5mm styles and 6 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 6 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels a) 1500 x 2100 mm (Double Leaf)

Supplying and fixing of Best Indian Teakwood Panelled door shutters Double leaf in position using 75mm x 37.5mm styles and 6 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 6 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels a) 1500 x 2400 mm (Double Leaf)

Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 125mm x 37.5mm styles and 3 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 3 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels a. 1000X2100mm with Brass fittings

Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 b) door size 1000 mm x 2100mm

Supplying and fixing of Double leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 c) door size 1500 mm x 2100 mm

Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

Applying one coat of Anticorrosive treatment for steel window/ M.S. Grills (using 5 liters of anticorosive chemical per one MT of steel) at site

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick

Supplying, Fabrication and placing of Mild steel grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors

Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. Ground floor

b. In First floor

c. In Second floor

d. In Third floor

Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters

Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg 1 No)

Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality

Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality

Supplying and fixing of Mild steel Manhole cover of size 600mm x 600mm

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32 mm dia

b. 25 mm dia

Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

Drilling of borewell including transportation from one place to another place a) Drilling of borewell in upto 76m

b) Form 77 to 91m

c) Form 92 to 107m

d) Form 108 to 122m

e) Form 123 to 137m

f) Form 138 to 152m

Brick work in Cement Mortar 1:6 using Chamber burnt bricks of size 9”x4½"X3” (23x11.4x7.5cm) for super structure in the following floors b. In Gro

b) From 60m upto 90m Depth ending from ground level

c) From 90m upto 120m Depth ending from ground level

d) From 120m upto 150m Depth ending from ground level

Providing 2000 LPH RO Plant & Softener Plant with following materials. Rate includes all equipment, Labour and any Plumbing Materials required for the successful Installation & Completion of the project.

Supply, Installation, Testing & Commissioning of 30kW Solar PV at Sheet Supply, Installation, Testing & Commissioning of 30kW Solar PV at Sheet Roof top, Supply of PV Panels, Inverters, Structures and all necessary accessories assorted to Solar PV system

Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells a) 150mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)

Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole a) 150mm dia casing pipes assembly

b) 200mm dia casing pipes assembly

Supply and fixing of 160mm dia PVC end cap of approved make as per IS 10124/1982 Part-II for borewell top cover of 6.1mm thick with inner thread

Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours)

Supply and delivery of clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board Duty:75 LPM x 175m

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 without panel board and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes Duty: 100LPM x 40m

und Floor/Stilt floor

THREE PHASE PANEL BOARD- STAR- DELTA WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) a) 6 HP

Supply and laying of PVC insulated and sheathed follwing core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor a) 3 core 4 Sq.mm flate type copper cable

b) 3 core 6 sq.mm flat type copper cable

Labour charge for laying of following PVC insulated and sheathed flat type copper cable a) 3 core 4 sqmm

Supplying, delivery and laying of following dia UPVC pipe Schedule 40/ schedule 80 of approved ISI quality below Ground Level a) 50 mm dia UPVC pipes Schedule- 80

b) 80 mm dia UPVC pipes Schedule- 80

c) 40mm dia UPVC pipes Schedule-80 Metro water line

Supplying, laying and jointing the following dia of UPVC Pipes of schedule 40/ schedule 80 with ISI mark of best approved quality (above ground level) c) 50 mm dia UPVC pipes schedule 80 with required UPVC specials

d) 65 mm dia UPVC pipes schedule 80 with required UPVC specials

Supplying and delivery of following dia MS clamp sets as per IS 1239/part II for erection of submersible pumpset in wells a) 80mm dia MS clamp sets

Supply and delivery of required dia Nylon rope of superior quality for submersible pumpset in borewell

Supply, installation, testing and commissioning of Butterfly valves with following sizes a) 80mm dia Butterfly valve

Supply and fixing of following dia GI Specials of best approved quality,with ISI mark a) 65mm dia GI Union IS 1239/Part-II

Supplying and fixing of following dia Gun Metal Specials as per IS Specifications a) 80 mm G.M Non return valve

b) 65mm dia GM Wheel valve with brass

c) 40mm dia Non return valve for Borewell & Metro water

Supplying and delivery of "Godraj Nav-tal Ultra XL+"/ equivalent lock with 3 Key of approved quality ISI make

Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick

Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

Supplying and fixing of PVC low level flushing tank (White - 10 litre capacity) with all internal fittings (wall mounting type)

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark grade ' P' or "S' trap - In Ground floor

Supplying and fixing of Indian Water Cl

oset white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark with PVC SWR grade ' P' or "S' trap- (Other than ground floor)

Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap

Supply and fixing of oval shape wash hand basin of size 560 x 450mm of best approved quality with ISI mark

Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 a) 110 mm dia.

b) 75 mm dia.

Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line

Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification b) CP two Way bib cock with health faucet

Supplying and fixing of Synthetic Grey, paradise/ Similar varieties of Granite slabs (Super fine polished with Machine cut edges) of size 4'x2' and above 18mm to 20 mm thick for flooring

Expansion Joint filling with Polysulphide sealant upto 30mm width - Horizontal - Providing and laying with two-part elastomeric fuel resistance

Expansion Joint filling with Polysulphide sealant upto 30mm width - Vertical - Providing and laying with two-part elastomeric

Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) a. 600mm x 600mm

Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling b) 600mm x 600mm x 200mm thick

Supplying and fixing of 20mm dia aluminium hanger rods

Supplying and fixing of aluminium towel rails of 75cm long

Supplying and fixing of aluminium plate with five pins for coat stand

Supply and Fixing of Bevelled edge mirror of approved quality and brand of size 500x400x5.5mm

Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth

Supplying and fixing of triangular shape chicken mesh tree guard

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark with suitable size PVC box (Fire retardant box) for coastal a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1.k.v. grade cable for Fan point.(PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point (PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe

Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

Charges for assembling and fixing of ceiling fan

Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality

Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb

Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED

Supply and fixing of LED Street lighting luminaries suitable for fixing following watts LED lamp b) 25watts LED lamp

Run off main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990,1.1 kv grade cable

Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Run off main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark (open wiring)

Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc

Supply and fixing the following Crimping Lugs suitable for the following size copper etc to complete. b) 10 sq.mm.

f) 25 sq.mm.

Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth Below GL m) 3.5 core x 185 sqmm

Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs (Above GL) b) 2 core 10 sq.mm.

f) 3.5 core 25 sq.mm.

g) 3.5 core x 35 sq.mm.

j) 3.5 core x 95 sq.mm.

m) 3.5 core x 185 sq.mm.

o) 3.5 core x 300 sq.mm.

Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs (Above GL) b) 2 core 10 sq.mm.

Supplying and fixing of brass cable gland suitable for following core and sqmm PVC armoured LTUG cable b) 2 core 10 sq.mm.

g) 3.5 core x 35 sqmm

j) 3.5 core x 95 sqmm

m) 3.5 core x 185 sqmm

o) 3.5 core x 300 sqmm

SUB MAIN PANEL Supply and erection of 400 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber made up of 16 SWG MS sheet

SUB Power PANEL I Supply and erection of 250 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber made up of 16 SWG MS sheet

AC Panel -1 Supply and erection of 250 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar chamber made up of 16 SWG MS sheet

FLOOR PANEL Supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated. Incoming 1 No. 200A TPN MCCB with Manual Closing Mechanism of 25KA Circuit Rating with Thermal O/L and Magnetic S/C Protection. Bus Bar: 200 Amps TPN Aluminium Busbar Outgoing 4 Nos. 125A TPN fixed type MCCB

FLOOR PANEL Supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated. Incoming 1 No. 100A TPN MCCB /OC, S/C with inter connection Bus Bar: 100 Amps 3 phase 4 wire Aluminium Busbar Outgoing 5 Nos. 63A TPN fixed type MCCB

RISING MAINS Supply, erection, testing and commissioning of 400A , 415V TPN aluminium bus bar rising main indoor type totally dust and vermin proof with suitable sizes for phases & neutral, support etc.

Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring with runs of 14 SWG TC wire for earthing,

Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection f) 3.5 core x 25 sq.mm

g) 3.5 core x 35 sq.mm

j) 3.5 core x 95 sq.mm

m) 3.5 core x 185 sq.mm

o) 3.5 core x 300 sq.mm

CABLE TRAY Supply and fixing of perforated cable trays of

Providing new wood work with two coats of best melamine polish/varnish of approved quality and brand

sizes as given below made out of 14 SWG CRCA sheet steel and hot dip galvanized with supports b) 300 x 50 mm

Supply and run of following tinned coated copper flat with necessary clamps/ supports onwall /floor /ground for earth connection a) 25mm x 6mm

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end)

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. a) upto 60m depth ending below ground level

Supply and run of 2 of No.8 copper wire for earth connections

Supply and clamping of 4 core 2.5 sq. mm PVC sheathed and armoured copper cable from alternator to the proposed DG panel on wall / in the hume pipe with necessary glands and crimping at both ends.

Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.1 m. Class 'B' GI pipe of dia not less than 40mm

Supplying and fixing of Cable Tray following size by using 16SWG GI Hot Dip / Powder Coated Cable tray from wall b) 300mm width and 50mm height

Supplying Fabrication and Erection in position of M.S. scheme name and layout board with 50x50x6mm M.S. angle for vertical post and support posts with 2.5 mm thick M.S. sheet

Supply and fixing of Galvanium Roof sheet of 0.47mm thick over MS purlin

Lift arrangements Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift without machine room, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD

Supply of 250 KVA Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with AMF Panel complete with all accessories

Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for commissioning the DG set

Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator

Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets etc

Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per is 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 swg and 50mm thick with 64 kg/cu. mtr. density etc

Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm b.) 100mm dia

c.) 80mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts b.) 100mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor c.) 100mm dia

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red

b) 25mm x 3mm

Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser

Supply, installation, testing and commissioning of Addressable Heat Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories

b) 200mm dia of PVC casing pipes (6Kg/cm2) (Medium depth)

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories

Supply and installation of Fire buckets of 9 ltrs capacity. Stand made of MS Channel and angle to accommodate 4 No of buckets filled with cleaned soft sand.

DRY CHEMICAL POWDER TYPE Supply and fixing of dry chemical powder type (ABC Type) of 6 Kg capacity, Pressurized with nitrogen

Supply and Erection of 12 zone Automatic fire alarm panel with fire and fault indications, lamp test, alarm cancel, system reset buttons.

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc.,

Labour charges for the erection of submersible pumpset in borewell /openwell Above 5 HP to 10 HP

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc.,

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling

b) Double Pole 6A to 32A, 10KA MCB

c) Triple Pole 63A,10KA MCB

CCTV Camera Supply & Installation of 4MP Fixed Dome / Bullet Network Color Camera, High quality image with 4MP,1/3" progressive scan

Supply & Installation of 32 Channel Network Video Recorder,Up to 32 channel IP cameras with 8 SATA HDD can be connected

Supply & Installation of 6TB Harddisk.

Supply & Installation of 8 Port Gigabyte 10/100/1000 PoE unmanaged switch etc

Supply & Installation of 6U Rack with accessories etc

Supply and fixing of following MCB with 4 pole sheet steel enclosue (Higher end) including cost of all materials, labour charges and erection charges etc a) Triple Pole 40A, 10KA MCB

Supply & Installation of 20 Mtr HDMI Cable etc.

Supply of Armoured Cat 6 LAN UTP Cable for Data points etc.,

Supply and installation of Heavy Duty speaker/LED TV Stand