ADDITIONS AND ALTERATIONS AND RENOVATION OF MUSI AND MANJEERA CABINS AT DMDE OFFICERS MESS

Amount

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Note:- (i)The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. .

M&L for preparation of Old/Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- Apex ULTIMA (Asian Paints) OR Equavalent.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land.

M&L for 50 mm thick Cement concrete type B-2, (1:2:4) (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for light coloured vitrified tiles Double charged tiles of any design and pattern, 800x800x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM (1:6) Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed

Ditto as item no 10 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 and including dismantling existing tile work with plaster complete all as specified and directed.

S&F Non skid joint less coloured ceramic non skid tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement and tiles shall be free from visible defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE. Complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar (1:4) and including dismantling existing tile work with plaster complete all as specified and directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting of existing windows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified.

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted float glass and including Dismantling/Cutting of existing windows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified.

Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

S&f Pressed steel frames Double or Single grue 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L cement concrete type C0, (1:3:6) (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed

M&L cement concrete type B1,(1:2:4) (using 20mm graded aggregate) in bed blocks or holdfasts, copings and kerbs etc complete all as specified and directed.

S&F 35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete ass as specified and directed.

M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint.

S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S&F 150 mm extruded brass handles,fabricated type polished complete all as specified and directed.

S&F floor door stopper of brass body and tongue and with hard drawn steel spring 140 mm long with screws.

S&F SS cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete. Make: Godrej/Link/Sheel

M&L for providing and fixing Plaster of Paris false ceilings with light weight 19 mm thick Gypsum Board False Ceiling straight or curve any profile grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and as per direction of Engr in Charge.

M&L for providing and fixing PVC false ceiling of size 7mm Thick 254x3048mm of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and as per direction of Engr in Charge.

M&L 18mm thick Plywood 9 layer grade BWR type BB fixed as in cupbords with screw to timber frame work .

M&L 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer,s instructions complete all as specified.

S&F Soft closing Hydraulic regular hinges automatic closing type suitable for cupboard doors of thickness 1-1.5mm complete all as directed Make : Godrej or equilvalent make

S&F Line art Handle zinc alloy die cast with satin finish of 150mm pitch fixed in position with SS screws complete all as directed and specified. Make : Hettich or equivalent

S&F telescope channel soft closing of 304 Grade SS fixed in position with SS screws complete all as directed and specified. Make : Godrej or equilvalent make

S&F Multicolour double layered black out fabric roller blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed . Make: Vista/Amar

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for preparation of surfaces of cracks in walls and ceilings and filling smart crack filler to any depth, while surfaces are dry and sealing cracks completely and flushing with existing surfaces all as per manufacturer's instructions. Make : Asian paints "Smart crack filler" or euivalent in Dr fixit

M&L 18 mm thick granite work as in pillars, display boards, wall cladding and like incl 15 mm thick screed bedding in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges complete, all as specified and directed.

S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain and brass fiitings and fixed complete to wall or laid in floor and Including taking down existing pipe line complete all as directed.

S&F water closet pedestal pattern couple type with integrated flushing cistern, with seat cover,jointing to waste pipe and pvc connection complete. Make : CAT No 92084 of Hindware or equivalent

S&F health faucet (Brass Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and SS wall hook including making connections and fixed in position complete in all respect as specified. Make- F160195CP of Hindware or equivalent

S&F two way CP brass bib cock complete all as specified and directed by Engineer in charge. Make- F570005CP of Hindware or equivalent

S&F 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified. Make- F570008CP of Hindware or equivalent

S&F CP brass long neck bib cock complete all as specified and directed by Engineer in charge. Make- F570006 of Hindware or equivalent

S&F PVC connection hot & cold 15 mm bore dia 600 mm long with 2 Nos Brass nuts with washer complete in all respect as specified

S&F brass chromium plated toilet paper holder complete in all respect as specified and directed. Make- Hindware or equivalent

S&F vitreous china white wash hand basin, oval shape of size 58x43 cm undercounter basin of approved make and model including CI/MS brackets, cutting for and pinning in brackets, including PVC waste pipe, PVC waste coupling complete in all respect as specified. Make- Hindware Cat No 10080 or Equivalent of Jaquar

S&F 15 mm bore SINGLE LEVER BASIN MIXER WALL MOUNTED chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as directed. Make- F570029CP of Hindware or Equivalent

S&F brass chromium plated soap dish double complete in all respect as specified and directed. Make- Jaquar or Equivalent of Hindware, Marc

S&F 5mm thick looking mirror bevelled edge of size 800x600 mm fixed with stainless steel fasteners complete all as specified and directed by Engr-in-Charge. Make : ATUL, Modi Float

S&F CP towel rack with brackets 600 mm long complete all as specified and directed. Make : F580008CP of Hindware or Equivalent

S&F CP brass single lever wall mixer 3 in 1 system with provision for both telephone hand shower and over head shower with 115mm long bend pipe, connecting legs & wall flange with hand and over head shower 240x240 mm square with shower arm 600x25x25mmcomplete. Make: F570022CP, F160205CP, F160105CP of Hindware or equalent

S&F in repairs glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated 150mm lenght brackets on both sides fixed in position complete all as specified and directed.

S&F wall to wall shower enclosure with one fixed glass and one sliding door,chrome finish with 8mm thick glass,height of shower 2000mm,width 1000 to 1500mm with right / left version as per site requirement complete including all accessories such as wall to glass hinges,glass to glass hinges,plastic parts,knobs,stabilizer rods,floor clamps,rollers etc required complete all as directed Make : Optima model of jaquar with CAT no :JSE-CHR-OPTSDR1015X of jaquar or equivalent as approved

S&F stainless steel peg set of 06 hooks.

M&L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches complete

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches, fixed to walls etc complete

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F 100 mm mortice latch with two levers (vertical type), brass body and fixed complete all as specified.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, etc and removing rubbish exc.1.5 km but nexc 5.00 km outside MOD premises. complete all as specified and directed.

S&F aluminium ( Die cast) body door closer hydraulically regulated designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complelte all as specified and directed. Make :- Godrej /Everite / Hardwin

S&F Double Arm Wall Mounted Reversible Plain/ Magnifying (5X) Pivotal Mirror with SS body of size 200 mm fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge. Make : Jaqwar or or equivalent

M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:-

One light/ Fan/ Bell point controlled by one way modular switch 6 Amps

One 3 pin 6 Amps switch socket outlet point on independent board

One 3 pin socket outlet 6 Amps on the same board with other switches.

Wiring for twin control light point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required

M&L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S/F modular switch one way 6 amps 1 module

S/F modular switch one way 16 amps 1 module

S/F modular fan step type regular two module

S/F modularbell push 1 module

S/F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as directed by Engineer-in-Charge.

S/F modular socket out let 6A/16A - 2/3 pin combined 2 module, multipurpose type complete all as directed by Engineer-in-Charge.

Supply and Fix Buzzer, Ding Dong AC. 230 volts, single pole complete all as directed.

S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete

Supply and fixing LED lights fitting 1x 20W, 220V, AC batten type fittings with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S&F in replacement highly efficient LED down light warm white 15 Watts IP 44 rating,recessed mounted pressure die cast aluminium in powder coated white finish with optimized heat sink for efficient heat dissipation with electrinic driver all as specified and directed. Make:- Havells, Cat No:- ENDURAHODLR15WLED830MOD & LEDDRIVER12/15WENDURAHOCE or equivalent in Crompton/Bajaj/Philips

S&F in replacement LED down light 08 Watts warm white recess mounted adjustable with aluminium housing with electrinic driver all as specified and directed. Make:- Havells, Cat No:- SPARKLEPROADJDLR8W830MOD40D & LEDDRIVER8WS or equivalent in Crompton/Bajaj/Philips

Supply and fix in replacement of sheet metal enclosure distribution board, Triple pole and neutral, AC, 415 volt, 04 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F MCB single pole 5 Amp to 40 Amps complete all as directed by Engr-in-charge

S&F MCB SPN 240 Volts 40 Amps complete

M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as directed by Eng-in-charge

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded FRLS copper conductor with one run of 4 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required.

S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

S&F 10 SQMM 2 Core Aluminium unarmoured, flame resistant PVC flat cable, ISI marked all as specified and directed.

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed. Make: Racold/Jaquar/Havells/Bajaj/Crompton

Supply and fix PVC air freshner 200 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make:- Bajaj/Havells/Crompton/Usha

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge. Make:- Bajaj/Havells/Crompton/Usha

Supply and install hi wall 1.5 TR split units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality EER 3.2 of capacity as shown. complete all as directed.

Supply, connect and testing voltage stabiliser 4 KVA single phase 230 volts 50 cycles wall mounting type suitable for 1.5 TR split AC with low/high voltage cut off and intelligent time delay 3 minutes + - 20% seconds of working range 170 volts to 270 volts complete all as directed. Make :- V-Guard / Servo / Bluebird

S & F PVC water drain out pipe 20mm dia with saddles for fixing on wall upto third floor complete all as specified and directed.

M&L for shifting of Split type AC, any type/capacity upto third floor, from one position to a new position by removing all electrical connection and copper tube connection with proper way and making good the old existing position by cement plaster and painting with existing colour and fixing of AC at new position including making all electrical connection, copper tube connection and all arrangements for fixing complete all as directed. Note :- Gas charging , extention of copper tube and cord cable shall be measured and paid separately under relevent item.

Supplying and fixing 20 A, 240 V, spn industerial type socket outlet, with 2 pole and earth, metal enclousedplug top alongwith 20 A'C' curve, SP, MCb, in sheet enclosure, on surfaceor in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc, as required.

S&F in replacement flexible LED strip uses high brightness yellow colour with electrinic driver all as specified and directed. Make:- Havells, Cat No:- FLEXISTRIP5MTRIP2055WLED860S & FLEXISTRIPDRIVER72WS or equivalent in Crompton/Bajaj/Philips

Supply and fixing of Garden Bollard light of 10 Watt, single phase, 50 Hz including making proper arrangement for fixing all as specified and directed. Cat :- Phillips Bollard BCP100 LED 10 W PSU GR M 600 mm

M.R.ENTERPRISES (BID ID -3523532)

hari enterprises (BID ID -3523191)

SUN LIGHT HOUSE (BID ID -3523854)

omsai thermax engineers (BID ID -3524209)

vvcenterprises (BID ID -3523132)

MOHAMMED GHOUSE (BID ID -3524300)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3524134)