Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹2.9 L
Closing Date
1 Apr 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc., (with or without supply of items/equipment's) for 230 Volts, 1 phase or 415V, 3 phase system or higher voltages.
26 conditions · 2 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (as defined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of Purchase Preference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non-submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Additional High Mast at station yards over MYS division.
Y-E-29-2025-26-102
Y-E-29-2025-26-102
Open
Works - General
180 Days
Dharwad, Karnataka
₹0
₹2.9 L
1 Apr 2026
11 Mar 2026
18 Mar 2026
33 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,80,44,427 | ||
| — | 47.00 | — | — | ||
| Supply at site of 16 meters High Mast of 8 arms in two sections suitable for 39 m/sec or 180 kmph wind speed, with raising and lowering system comprising, head frame, luminaries in symmetrical arrangement, double drum winch, 6 mm diameter SS wire rope, trailing cable 5 core, connector, integral power tool motor, manual handle, junction box, lighting, supply of 400 W LED flood light fitting-8 Nos. per Mast, aviation light single dome, supply of outdoor type feeder pillar box with 16 SWG GI sheet powder coated, comprising of 36 A or higher TPN MCB C Series as incomer, single dial time switch, 25 A or higher TP Contactor for automatic switching of luminaries, power tool control with 2 Nos. of 9A Contactor and raise lower push button, construction of suitable foundation with M20 grade concrete for erection of High mast at site along with supply of foundation bolts, Fixing and wiring of luminaries using 3 core 1.5 sq.mm copper wire, 5 core 2.5 sq.mm trailing cable, earthing with 2.75 meters GI Pipe 50mm C Class-2 Nos. per Mast and connecting of earthing with 25*3 mm GI Flat, installation of feeder pillar by grounding the stand in concrete. | — | — | — | 1,51,28,501 | |
| — | 29200.00 | — | — | ||
| Laying of 4 x 16-49 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc.. | — | — | — | 2,62,800 | |
| — | 1900.00 | — | — | ||
| Excavation of horizontal drilling (Trenchless) in all types of soil for laying of LTUG/HTUG cable across the track/road. | — | — | — | 31,12,200 | |
| — | 26530.00 | — | — | ||
| Excavation of cable trench 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench to its original position. | — | — | — | 38,73,380 | |
| — | 600.00 | — | — | ||
| Laying of HDPE Pipe of dia 110 mm grade PE-100 with pressure of PN 6 for safety of cables. | — | — | — | 12,000 | |
| — | 27780.00 | — | — | ||
| Laying of HDPE Pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables. | — | — | — | 3,61,140 | |
| — | 2700.00 | — | — | ||
| Excavation of cable trench below the Rail Track/Road/Tiles 450 mm. wide and 1000 mm. deep in all types of soil and refilling the released ballast/refilling concrete/Tiles to bring back to original surface. | — | — | — | 7,31,700 | |
| — | 2240.00 | — | — | ||
| Platform surface concrete/tiles/road cutting for excavation of cable trench 300 mm wide x 300 mm deep, re-fitting of tiles or refilling of soil and re-plastering of excavated trench with cement on the PF's, to bring original shape. | — | — | — | 13,41,760 | |
| — | 106.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 5,76,216 | |
| — | 47.00 | — | — | ||
| Design, Fabrication, supply, fixing, testing and commissioning of L.T control panel of suitable size made up of 16 S.W.G CRCA sheet, angle frame, duly powder coated with double door and locking arrangement on suitable size plinth/ foundation (plinth should be minimum 1 feet below surface level and 1 meters above surface level) with MS "C" channel with nut bolt,100A Aluminium bus bar with following switchgears (All C Curve) - 63A 4 Pole MCB - 02 No., 32 A 4 Pole MCB-02 No. | — | — | — | 9,34,642 | |
| — | 47.00 | — | — | ||
| Design, fabricate, supply, fixing, testing and commissioning of wall mounted type suitable size control panel box comprising of 25A TPN MCB-1 No., 16A SP MCB-1 No for lighting control, 02 Timer and 02 Contactors for All night part night control. | — | — | — | 6,42,396 | |
| — | 588.00 | — | — | ||
| Providing G.I chain link fencing 50 mm size of 8 gauge properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer in charge for work including two coats of approved quality paint over one coat of primer paint as per KEB standard. | — | — | — | 5,35,080 | |
| — | 300.00 | — | — | ||
| Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted / welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. | — | — | — | 1,52,400 | |
| — | 29.00 | — | — | ||
| Liaison work with EB officials in getting Power supply - making Agreement; Commissioning work exclusive of EB Deposit work. | — | — | — | 1,66,460 | |
| — | 2.00 | — | — | ||
| Supply, erection including foundation for 9 Mtr RCC pole with cross arm 1.5 mtr fixing with clamps and all other required materials. | — | — | — | 22,790 | |
| — | 103.00 | — | — | ||
| Supply and fixing of LT cable terminal LILO sintex box (Min size 333 x 233 x 120 mm) with Hinged door with 32A strip connector. | — | — | — | 1,90,962 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
AdvanceCorrectionSlipsNo1-10toGCC-2022.pdf
ATTACHMENT
Tender booklet
ATTACHMENT
TB-AdditionalhighmastsatstationyardsoverMYSdiv.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .