Re-construction of 5 (five) nos. of Septic Tank with Soak Pit at Qtr. No. 1,2,6,11 and 12 and renovation of 1 (one) no Toilet of Qtr. No. 1 at Bantow Colony, North Lakhimpur

Amount

EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2.00m below the existing ground level (a) In ordinary soil

Providing soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soiling

Plain cement concrete works with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) (a)In prop 1 cement : 3 sand :6 coarse aggregate by volume

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed (I) In sub-structure upto plinth level including dewatering if necessary (b)In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S. rod/ Tor steel of column to be embedded in cement mortar and will be measured and paid separately. (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4 (1cement:4 sand

Providing and laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforced cement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately ) (I)Using Mixer Machine (A)In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, (N)Without using admixture, plasticizer (a) M15 grade concrete or Prop 1:2:4

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work / R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details , supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the rate) Upto 1st floor level) From Primary Produce : TATA/SAIL/Jindal/steel/Shyam steel/RINL (i) TMT corrosion resistant steel (CRS)reinforcement bar

10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed exceeding 80mm girth and finished even and smooth including curing complete as directed (b)In cement mortar 1:4

Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining fitting and fixing with with clamps etc. as necessary complete at all levels including below G.L. as directed and specified a) In exposed surfaces or in trenches ii) 110mm dia of 6 m length

Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining fitting and fixing with with clamps etc. as nece ssary complete at all levels including below G.L. as directed and specified v) 63mm dia

Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a)In exposed surfaces or in trenches (ii)110mm dia

Supplying fitting and fixing PVC Plain single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surface or in trenches ii) 110mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surface or in trenches v) 110mm x 63mm

Providing fitting and fixing PVC of ISI make complete as directed and specified v) 63mm dia PVC cowel of ISI make

Demolishing of CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Demolishing the plastering from walls /RCC and PCC members without causing any damage to the wall/member upto any height including disposal of debris as directed for all levels

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (b) 50mm thick

Providing wood work in frame (chowkaths) of doors, windows, clerstory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx 3mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi

Providing and fixing flush shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S code including oxidized iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. (b)Non decorative type and block board core (i)40mm thick

Providing fitting alluminium sheet to one face of the down including nailing etc. complete as directed

15mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side (B) A cement morter 1:4

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8mm on floors, skirtings, treads and risers of steps over cement mortar bed 15mm thick in prop 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/Sika/Pedelite/Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Executive range (Somany/Orient/Nitco/ Asain Make) (i) Of size 300mm x 300mm and above

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10mm thick in prop 1:3 (1 cement :3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (choksey / sika / Pedelite /Roug)/ white cement slurry) mixed with approved pigment to match shade of tiles complete at all levels as specified and directed . (cement plastering to be measured and paid separately.) (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department) (walls means both interior and exterior walls) (B)Executive range Somany/Orient/Nitco/ Asian Make i)Of size 200mmx300mm and above

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required.(Flushing Cistern to be paid separately) (B) Hindare make a) White iii) Water closet POPULAR “P (Cat. No. 20044) (inclusive of seat cover)

Supplying fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (pipe will be measured separately) ii) Hindware make (a) White (i) Steel + PVC cistern

Providing vitreous China wash basin with CI/MS brackets, C.P. brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required (Pillar cock, stop cocks, waste coupling are to be paid separately) 1.13.1 PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (i) CEDER 570x440 (Cat. No. 91049/91115)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (ii) Rupa 40mm (HT/FT) (Cat no. WS -0801)

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified

Providing fitting and fixing recessed soap tray/ soap dish complete as directed and specified (B) Sona Make (ii)Soap dish pears (Cat. No. TR-0662) Soap dish square (Cat no. TR-0663)

Providing fitting and fixing CP towel rail complete as directed and specified (b) Sona Make (iii) Towel rail Diplomat 600mm long (Cat. No. TR-0605)

Supplying fitting and fixing approved u PVC pipes of different sizes, with all necessary ‘R’ brand or similar approved uPVC fitting such as bend, tee elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/PRINCE/SFMC brand or other equivalent approved brand (High pressure pipe Sch-40) (f) 15mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) VI) Sona brand i) Bib cock (code No. RG-5015)

Supplying fitting and fixing chrome plated (C.P.) stop cock of approved brand and size as mentioned below as directed and specified (G.I. & C.P pipes will be measured and paid separately) (IV) Sona brand (d)Angle stop cock two way 15mm

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed (I) SONA Make a) Heavy type

PVC connection pipe

Supplying, fitting, fixing anodized aluminium fittings of approved make,reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete (anodized to bright natural matt & satin finished) b) Tower bolts iii) 200mm x 12mm

Supplying, fitting, fixing anodized aluminium fittings of approved make,reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete (anodized to bright natural matt & satin finished) ( c ) Door handles iii)150mm

Supplying, fitting, fixing electrocoloured iron fittings of approved make,reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws including necessary screws etc. complete a) Sliding door bolts i) 300mm x 16mm

Applying one coat of distemper primer of approved brand and manufacture on wall surface after thoroughly brushing the surface free from morter droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Distempering ( one coat) with oil bound distemper of approved brand and manufacture and of required shade on old wall surface to give and even shade, after thoroughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth.

Extra over item no ( m), ( n) and ( o) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture

Applying priming coat over new wood and wood based surfaces over 100 mm in girth/ width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. ( a) With ready mixed paint, wood primer ( pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture ( Asian paint/ Berger paint/ICI paint/J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other Foreign matter sand papering and stooping. (i)Surface over 100 mm in width or girth. (a) General purpose ( Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

MD. KABIUL HUSSAIN

SRI PRODEEP KR. CHUTIA