Providing Modified Bituminous Membrane waterproofing treatment to the terrace of third floor Traffic cum Bus Engineering Building, Pump room, Booster room and UGWT at Backbay Bus Depot.

Civil Works

Removing the existing teakwood/M S door with frame of any size and handing over to the Undertaking at site of work.

Removing the existing Shahabad/Tandur/Kotah / IPS/mosaic /white glazed tile flooring or dado and carting away the same out of the Undertaking's premises.

Removing the existing plaster of any finish and of any thickness from walls, ceilings, terrace parapet wall internally and external plaster upto 3.0 M height from ground.

Removing the damaged / corroded existing G I pipe lines of any diameter(underground and above ground) and handing over the released material to the Undertaking including reinstating the surfaces to match with existing surrounding surfaces

Removing the existing tarfelt/ modified Bituminous Membrane waterproofing treatment and carting away debris out of the Undertaking Premises.

Removing / breaking the existing RCC jalli as directed by the Engineer.

Aluminium glazed window with adjustable type glass louvers as per' Special Specifications'.

Indian Patent Stone flooring (40mm thick)

140 mm to 150 mm wide 15mm to 19 mmthick machine cut double machinepolished white/ green marble of uniform thickness in single / double pieces (widthwise) for window sills including fixing in neat cement on minimum 20 mm thick c.m.(1:4) bedding.

19 mm thick machine cut double machine polished white green marble of uniform thickness in single / double pieces (widthwise) for door frame including fixing in neat cement on minimum 20 mm thick c.m.(1:4) bedding.

Sand faced cement plaster (in two coats)with waterproofing compound (for replastering work) by using Readymix Mortar as per `Special Specifications'.

Placing brick bat 8 cm average thickness in cement mortor (1:4) including grouting the joint added with waterproofing compound as per Special Specification.

10 cm x 10 cm size c.m. (1:2) vata using waterproofing compound.

Providing & applying modified Bituminous Membrane reinforced with Polyster i.e. APP of 3mm thickness for waterproofing as per 'Special Specification'.

20mm thick cement plaster with matt finish by using Readymix Mortar.

20mm thick cement plaster finished smooth with neat cement by using Readymix Mortar.

Readymix Polymer modified mortar applied to the deteriorated concrete surfaces of RCC structural members viz. Columns, Beams and Slabs including providing antirust treatment to the exposed reinforcement etc complete as per 'Special Specification'.

Pressure grouting with polymer modified cementitious slurry in proportion (1:1)

Oil bound distemper in two coats over a coat of primer to be applied as per manufacturer's specifications

Acryalic paint (polymer based 100%) using superior quality as per standard &manufacturer's Specifications.

FRP moulded single shutter fully panelled door with heavy duty aluminium fittings including fixing in position as per Special Specifications (Excluding Marble frame).

160 mm dia UPVC rain water pipe line including necessary fittings, fixtures, etc as required and as per `Special Specifications'.

Providing clamping arrangment for downtake drainage / water supply pipes as shown on drawing No 69- 30251 and as directed by the Engineer ( M S supporting bracket will be measured and paid under separate schedule item of structural steelwork )

G I U clamp with nuts and bolt arrangement for C I / UPVC drain pipes pipes of various dia metres

Providing 5 mm thick G.I. clamp (brackets)arrangement for downtake pipes of any diametres to be fixed on the wall with necessary nailing etc. complete and as directed by the Engineer

Refixing the existing G I/CPVC pipe lines of any size including `B' class enamel painting.

10mm thick cement plaster with matt finish by using Readymix Mortar.

Applying white cement putty (birla whitewall care putty or equivalent) of 1.5mm to2.5mm thick with the help of putty bland in two coats (leveling ceiling)

Anticorrosive protective coating using Epoxy finish coat (One coat) and acrylic aliphatic polyurethane material (two coat)over a coat of primer containing polysulfide epoxy resin and zinc phosphate manufactured by Glo-Protek orequivalent.

Removing drain pipes (soil, waste water, rain water or vent) of any size with all its accessories.

Refixing the existing drain pipes of any size including cleaning and necessary painting and reinstating the damaged portion of masonry walls, cornices, etc complete.

40mm dia. CPVC pipes with CPVC/GI fittings including necessary excavation, refilling, scaffolding, making holes in wall, reinstatement etc. complete as directed by the Engineer.