Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.1 L
Closing Date
11 May 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
NIT
15 conditions · 4 needing a document upload
As per PREAMBLE CLAUSE No. 11.2 of Tender Document:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
ELECTRICAL CONTRACTORS LICENSE:- The contractor shall fulfill valid Electrical Contractor License requirement as per IE Rule 1956 clause no- 45. Electrical Contractors license shall be submitted along with the offer, failing which the offer will summarily be rejected.
Technical Eligibility Criteria: As per clause 11.1 of Preamble and Scope of Work of uploaded tender document Page no. 4 & 6.
SIMILAR NATURE OF WORK: The contractor should have executed, "Electrification / Rewiring of Service or Residential building/Yard / HT/LT Substation work / HT/LT cable work / Street lighting / Platform or building lighting management / circulating area Lighting/ Electrical overhead power supply work / Electrical pump work etc.
24 conditions · 10 needing a document upload
All the supporting DOCUMENT(S)/CERTIFICATE(S) of as a proof Technical and Financial credentials as detailed in this tender Document, has/have been attached.
Supporting DOCUMENTS/CERTIFICATES as detailed in this Tender Document has been attached.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids.) (See clause 1.10 of Chapter-I of Tender Document)
All the bidders / tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law. (Copy of GST registration certificate)
Copy of PAN CARD
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(A) Electrification for Provision of new COP on uncovered portion of platforms and replacement of damaged valley gutters and down take pipes in section ULNR - KJT. (B) Electrification for Extension of platforms for running of 15-car EMU services beyond Karjat upto Khopoli in SE section. (C) Electrification for Extension of platforms at VGI, Shelu, BVS & KJT for running of 15-car EMU services beyond Kalyan up to Karjat and Khopoli.
BB-LG-W-KJT-2026-01
BB-LG-W-KJT-2026-01
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹4.1 L
11 May 2026
17 Apr 2026
27 Apr 2026
322 items across 10 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 83,27,803.32 | ||
| — | Item Breakup for | details. | — | ||
| (1) Supply, erection, testing and commissioning of 2 x 2 36 W LED fitting with IP 20 complete with connection and necessary fixing arrangements as per site requirement. | — | — | — | 1,44,234.8 | |
| — | Item Breakup for | details. | — | ||
| (2) Supply, fixing, testing & commissioning of outdoor type LED tube light luminaires 2 x 18W (each 20W maximum), 4 ft. long, weather proof having IP65/66 protection, system efficacy greater than or equal to 110 lm/W, luminaires must be capable of delivering minimum 4000 lumens, luminaires complete with all accessories and other specifications. | — | — | — | 13,68,368 | |
| — | Item Breakup for | details. | — | ||
| (3) Supply, installation, testing, and commissioning of 18-20 Watt, 4-feet slim LED batten fitting with high-lumen output, inbuilt driver, glare-free diffuser, and extruded aluminium housing, including aluminium framing, wiring, and connections as per site requirements, complete in all respects. | — | — | — | 1,87,174 | |
| — | Item Breakup for | details. | — | ||
| (4) Supply, erection, testing and commissioning of 85-90W LED outdoor/flood/street lighting fitting complete with all fixing arrangements. | — | — | — | 3,49,078.8 | |
| — | Item Breakup for | details. | — | ||
| (5) Supply, erection, testing and commissioning of 48" sweep energy efficient BLDC ceiling fan with decorative with down rod, motor, etc. with necessary connection. | — | — | — | 13,94,477.5 | |
| — | Item Breakup for | details. | — | ||
| (6) Supply, erection, testing and commissioning of Air circulator (BLDC) wall mounted 24" sweep fan with necessary connection. | — | — | — | 11,45,202.4 | |
| — | Item Breakup for | details. | — | ||
| (7) Supply, erection, testing and commissioning of 12" metal body type exhaust fan complete with motor guard, cover, etc. | — | — | — | 49,078.92 | |
| — | Item Breakup for | details. | — | ||
| (8) Wiring of the conduit Light /fan point with all accessories. | — | — | — | 1,73,784 | |
| — | Item Breakup for | details. | — | ||
| (9) Supply, running, fixing and stringing of OHE mains of 5 line wire. | — | — | — | 4,79,640 | |
| — | Item Breakup for | details. | — | ||
| (10) Supply, running, fixing and stringing of OHE mains of 3 line wire. | — | — | — | 1,48,700 | |
| — | Item Breakup for | details. | — | ||
| (11) Supply, laying, running fixing of following sizes of XLPE insulated, PVC sheathed, 1.1 KV grade cables as per IS. (a) 4 C 120 sq.mm AL conductor armoured. (b) 4 core 25 sq.mm AL conductor, armoured. (c) 4 core 16 sq.mm AL conductor armoured. | — | — | — | 8,79,500 | |
| — | Item Breakup for | details. | — | ||
| (12) Excavation of cable trench in soil & filling the trench with sand, pebbles etc. after laying of the cable complete with RCC warning cover & cable markers, sand etc. as per railways requirement. | — | — | — | 10,874 | |
| — | Item Breakup for | details. | — | ||
| (13) Excavation of cable trench on CC flooring / Hard / rocky soil & making of trench & recasting of flooring/pit after lying of cable as per railways requirement. | — | — | — | 1,50,618 | |
| — | Item Breakup for | details. | — | ||
| (14) Supply and laying of HDPE pipe of size 4" dia. | — | — | — | 38,156 | |
| — | Item Breakup for | details. | — | ||
| (15) Supply and fixing of GRP / FRP cable tray made of glass fiber reinforced polyester moulding composite material, size 200mm width x 75mm depth min., 04mm thick min., including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc. | — | — | — | 1,92,837 | |
| — | Item Breakup for | details. | — | ||
| (16) Supply, erection, testing and commissioning of timer panel board as per railway's requirement. | — | — | — | 1,36,828 | |
| — | Item Breakup for | details. | — | ||
| (17) Supply and Erection of mini feeder piller board outdoor type with 200 Amps TPN MCCB for incoming and suitable size Al. Busbar and 4 Nos. per phase 63 Amps HRC fuse base with fuse link , connectors, stand etc. as per specification. | — | — | — | 82,662.12 | |
| — | Item Breakup for | details. | — | ||
| (18) Fabrication, supply, fixing, testing & commissioning of L T panel having electronic / microprocessor based MCCBs and outgoing MCCBs with additional protection of adjustable earth leakage protection. I/C - 250A4P MCCB- 02Nos., 250A 4P Auto transfer switch ATS- 01 No., O/G-125A 4P MCCB- 02 Nos., 63A 4PMCCB- 06 Nos., and SP MCB 6A to32A -18 Nos., complete with meters & other accessories, as per specifications. | — | — | — | 3,78,420.13 | |
| — | Item Breakup for | details. | — | ||
| (19) Design, fabrication, Supply, multiple loading / unloading, storing installation, fixing, testing & commissioning LT Distribution / Panel board having thermal magnetic MCCB's 250A 4P - 1 No. as incomer and 100 A 4P- 1 Nos, 63A 4P- 4 Nos. as outgoing with, Rotary Handle vary Depth, Padlock support for operating Handle, Phase barrier, DPX spreader Links, etc. as required and complete in all respect. | — | — | — | 1,59,428.13 | |
| — | Item Breakup for | details. | — | ||
| (20) Supply, erection, testing and commissioning of LT Distribution Panel Board comprising of 100-125 Amp FP MCCB 36kA Microprocessor based release 02 nos, RCBO 4 Pole, 32 Amp 415V 50Hz 10kA Sensitivity -300 mA - 4 nos, RCBO 4Pole 63 Amp 415V 50Hz 10kA Sensitivities- 300 mA - 6 nos. as outgoing complete with busbars, neutral link, etc. as per site requirement | — | — | — | 1,27,387.02 | |
| — | Item Breakup for | details. | — | ||
| (21) Design, manufacture, display, erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards etc. in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 6-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (The matter as per Rly requirements) | — | — | — | 4,25,412 | |
| (22) Supply, erection, testing and commissioning of maintenance free earthing. | — | Item Breakup for | details. | — | |
| — | Item Breakup for | details. | — | ||
| (23) Supply, erection, testing and commissioning of GI strip of 25 mm x 5mm. | — | — | — | 45,692.5 | |
| — | Item Breakup for | details. | — | ||
| (24) Supply of aluminum folding ladder 15 feet. | — | — | — | 8,583 | |
| — | Item Breakup for | details. | — | ||
| (25) Supply of aluminum folding ladder 10 feet. | — | — | — | 7,250 | |
| — | — | — | 12,56,363.04 | ||
| — | Item Breakup for | details. | — | ||
| (1) Supply, erection, testing and commissioning of 2 x 18 W LED fitting with IP 66 complete with connection and necessary fixing arrangements as per site requirement. | — | — | — | 1,97,742 | |
| — | Item Breakup for | details. | — | ||
| (2) Supply, erection, testing and commissioning of 70-75W LED outdoor lighting fitting complete with all fixing arrangements. | — | — | — | 34,518 | |
| — | Item Breakup for | details. | — | ||
| (3) Supply, Installation, Testing and Commissioning of High Hot dip galvanized octagonal pole with longitudinal seam weld throughout the length complete with one arm for fitting installation and J type foundation bolt set complete in all respect with RCC foundation. | — | — | — | 36,320.73 | |
| — | Item Breakup for | details. | — | ||
| (4) Supply, erection, testing and commissioning of energy efficient 230V, 50Hz a c ceiling fan size of 1400mm sweep having wattage of 35/40W, range of voltage operation at various speed - 120 to 260V AC, speed of 270 to 290 RPM with 5 step speed control electronic regulator, copper winding complete as per IS : 374 - 1979 or laterst, IE rule & site requirement. | — | — | — | 70,253.5 | |
| — | Item Breakup for | details. | — | ||
| (5) Supply, erection, testing and commissioning of 24" sweep 3 blade type air circulators complete with necessary fixing arrangement. | — | — | — | 1,32,393.44 | |
| — | Item Breakup for | details. | — | ||
| (6) Supply, erection, testing and commissioning of astronomical timer panel board for high mast with all fixing arrangement as per Railway's requirement. | — | — | — | 19,772.83 | |
| — | Item Breakup for | details. | — | ||
| (7) Supply, laying, running fixing of following sizes of XLPE insulated, PVC sheathed, 1.1 KV grade cables as per IS. (a) 4 core 120 sq.mm, LT, AL conductor, armoured. (b) 4 core 35 sq.mm AL conductor, armoured. (c) 4 core 10 sq.mm CU conductor , armoured. | — | — | — | 3,45,380 | |
| — | Item Breakup for | details. | — | ||
| (8) Excavation of cable trench in soil & filling the trench with sand, pebbles etc. after laying of the cable complete with RCC warning cover & cable markers, sand etc. as per railways requirement. | — | — | — | 13,766 | |
| — | Item Breakup for | details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022upto11ACS.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
RDSOSPN_197Ver_1.pdf
ATTACHMENT
SpecificationBLDCceilingfan.pdf
ATTACHMENT
Guidelines on Signages Part 1
ATTACHMENT
Guidelines on Signages Part 2
ATTACHMENT
TenderBookofVGI-KJT-ULNR.pdf
ATTACHMENT
GuidelinesonStandardSignagesatStationsonIndianRailwaysPart-1.pdf
ATTACHMENT
GuidelinesonStandardSignagesatStationsonIndianRailwaysPart-2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .