SPECIAL REPAIR TO BS GATE IN CMM AND PROVN OF PARKING SHED FOR MOTOR CYCLE/SCOOTER AT VARIOUS PLACES NEAR JCOS/OR GOVT MD ACCN AT BIRBAL ENCLAVE (LAC LINE) OF SIGNAL RECORDS UNDER GE (EAST) JABALPUR

Amount

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles completed all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removing the rubbish to a distance n. exc 100m complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified.

Excavation in trenches nexc 1.50 mtr wide and n exc 1.50 mtr depth, for foundation etc nexc 10Sqm on plan and getting out in hard/dense soil complete all as specified & directed.

Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth but not exceeding 3mtr for foundation, etc. n exc 10 sq m on plan and getting out in hard & dense soil completed all as specified and directed

M&l for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete completed all as specified and directed

M&L for reinforced cement concrete M-20 (Nominal Mix) type B1 1:1 1/2:3 (20mm graded aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete completed all as specified and directed

M&L for reinforced cement concrete M-20 (Nominal Mix) type B1 1:1 1/2:3 (20mm graded aggregates) in Columns, pillars, piers, posts and struts completed all as specified and directed

M&L for reinforced cement concrete M-20 (Nominal Mix) type B1 1:1 1/2:3 (20mm graded aggregates) in beams,cantilevers, bressummers, lintels over 1.5m span completed all as specified and directed

M&L for reinforced cement concrete M-20 (Nominal Mix) type B1 1:1 1/2:3 (20mm graded aggregates) as in Domes, Vaults, shell roofs, archribs and folded plates complete all as specified and directed

S&F MS TMT bars10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed confirming to Fe 500 or Fe 550.

ditto All as per item No 11 above but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces

Formwork to sides of pillars, piers, columns, square, rectangular, polygonal, circular on plan rough finished surfaces of concrete completed all as specified and directed

Formwork to sides and soffits of domes, vaults, shell roofs and arch ribs curved in two panes for fair finished surfaces.

Formwork to cornices and mouldings of any shape in cross section and of any girth for fair finished surfaces

Formwork to small surfaces such as cantiliver ends, brackets, ends of steps, caps and bases of pilasters and the columns and the like for fair finished surfaces

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces

M&L moorum/red bajri filling in floors or pavings laid in layers nexc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers nexc. 15 cm thick, watered and rammed to a true surface complete all as specified.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers nexc 25cm thick in any type of soil complete all as specified and directed

Removing excavated material nexc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and directed

M&L Mild steel work framed such as grills,gratings etc. with ends of bars souldered or or rivetted or forged into spikes,framed guard bars,frame works of water tanks and similar work complete all as specified and directed conforming to Fe-250 Gde-165.

M&L for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in bed block for fixing hold fasts, coping etc. complete all as specified.

Dismantling of floor, heath or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified.

M&L non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n exc. 0.18 sqm,in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles complete all as specified.

M&L Glazed ceramic tiles (300× 450)× 7 mm thick (coloured) on vertical surfaces such as dado skirting and rise to steps etc and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth w/o using extra cement with and including WPC by 3% of weight of cement used all as specified & directed.

M&L Providing and applying Heritage Regular Granules homogeneous exterior wall textured surfce coating in mono or multi colour shades manufacture by "Backlite Hylam Limited", consisting of two components of dry regular granules (25 Kg pack) made of 92% silika particles coated with fade resistant pigment (primarily inorganic) and a 100% acrylic polymer bonding agent (05 Kg pack) with applied thickness of coating between 0.8 to 1.2mm in single coat on a curved even and smooth plastered surfaces without keying. Apply of coating on primed substrate uniformly, without voids with the help of trained applicator in accordance with the instructions of manufacturer and as per the direction of Engineer-in-Charge. It also inclusive of priming the surface as per manufacturerer's instructions.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and directed..

M&L preparation of new surfaces of any description and apply two coat of synthetic enamel paint over and including a coat of red oxide not other wise described over 10 cm width or girth over steel surfaces surfaces complete all as specified.

M&L for Makrana white Marble tiles 30cmx20cmx20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing type including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface complete all as specified

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed..

M & L for 100mm thick PCC 1:4:8, type D2, using (40mm graded stone aggregate) as in sub- base floor complete all as specified.

M&L for crushed stone sand/ river sand as in cushioning layer below interlocking paver tiles well compacted to a true surface complete all as specified.

M&L for rubber moulded glossy finished precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 of 80 mm thickness M-40 Grade with grey cement & pigment completed all as specified and directed. Make-Mehtab/Balaji/Bajrang

M&L for rubber moulded stone kerb of precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm wide & 15cm thick finished at top bullnosed shape and finished surface even and smooth using coloured pigment (for exposed portions only) with glossy finish and jointed in CM 1:6 struck finished complete all as specified.

M&L providing cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in foundation complete all as specified.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth w/o using extra cement complete all as specified & directed .

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

M & L cement concrete (1:3:6) type C2 (40mm graded stone Agg.) as in embedding of angle iron post all as per specified and directed.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

S&F rolled MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) also welding, fastening and fixing complete all as specified.

S&F Mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S & F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of walls, floors, as per existing finishes etc complete all as specified.

M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

-ditto- all as per item No 50 above but One light point controlled by one way switch

S&F in replacement of Switch piano flush type single pole one way 5 amps. Make : Havells/ Anchor/ Leader

S&F in replacement of Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified Make : Havells/Anchor/Leader

Supply and fixing in replacement of new generation energy saving IP 66 flood light luminiaries with long life versatile pressure die-cast aluminium road way luminaire complete all accessories ,connecting up with three core flexible copper conductor cable all as specified & directed with high power LED 120 watt , aerodynamically designed with better thermal management complete.Make- Havells,Bajaj,Crompton

M&L in replacement of GI pipe bracket suitable for 40/45 watt focus light made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of claimps made of 30mm x 5mm thick Flat iron with GI bolt, nuts & washers complete all as specified and directed

Supply & Fix in replacement of fountain spray ring with suitable telescopic legs of stainless steel to create ring of water with daimeter of tube upto 60 mm and diameter of ring up to 5 meter, suitable for adjustable nozzels all as specified and directed by Engr-in-Charge. make kripton/CWF/Raj

Supply & Fix in replacement of brass angular jet nozzels of size 15mm/20mm bore adjustable nozzel for function rang brass with shine crome as per site requirement all as specified and directed by Engr-in-Charge. Make CWF/FF/Jaquar

Supply & Fix in replacement of brass Centre jet nozzels of size 20mm/25mm bore adjustable nozzel for function rang brass with shine crome as per site requirement all as specified and directed by Engr-in-Charge. Make CWF/FF/Jaquar

Supply & Fix in replacement of brass angular valve of size 20/25 mm bore suitable for centre jet nozzel with complete fittings as per site requirement all as specified and directed by Engr-in-Charge. Make CWF/FF/Jaquar

S&F in replacement of electric panel for 10 HP motor with double door poweder coated with MCB/fuse/indicating switch and phase preventor,ampmeter/voltmeter and complete with accessories all as directed by Engr-in-Charge.

Supply & Fix in replacement of 10 HP submersible monoblock pump of stainless steel body, premium 'A' class of rating HP/KW, 10/7.5 operating rang voltage limit 415 to 300 V, Bearing front - 6308 black - 6307, size of oil seal 32-50-10, size of gland 8.0 mmx 8.0mm all as per site requirement and directed by Engr-in-Charge. Note :- Old pump shall be deposited in AGE E/M store and taken on charge.

Supply & Fix LED based colour changing light nozzel mounted, programmable, model 96 R or equivalent made of GM cromplated & powder coated aluminium base with operating rang of 18 V DC complete all as direted by Engr-in-Charge.

Supply & Fix microprocessing controller with 18 V transformer as per site requirement and contrast having a slow, medium, fast mode for capacity minimum 15 colour changing mode with suitable accessories complete all as directed by Engr-in-Charge.

S&F necessary electric work to connect LED based lighting with the microprocessor with tin/silver plated wire complete all as per site requirement and directed by Engr-in-Charge,

Supply & Fix in repairs 40mm bore Gun metal Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete all as specified

M&L in repairs for MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 8 way Double door IP-43-IK09 protection grade, L&T CAT NO-DBSPN008DD/ LEGRAND CAT NO-607715/ equivalent of ABB

M&L in repairs for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating. Make : L&T/Legrand/ABB/Schiender

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified.

Supply & Fix in repairs LED postern lamp fitting of 45 Watt of standred rating and indivisual LED with high luman and power factor not less than 0.99 all as spesified and directed by Engr-in-Charge.

S&F in repairs XLPE insulated armored and PVC sheathed heavy duty electric cable with aluminum conductor 1100 Volt grade laid in tranches passing through pipes /ducts including testing complete of cross sectional area 3.5 Core, 35 Sq. mm cross sectional areaand size Make of cable , NOTE-Rate is inclusive of cable lugs & cable gland.

Excavation in trenches in soft loose soil n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out complete all as specified.

Ditto- All as per item No 71 above but depth exc 1.5 mtr and n. exc 3 mtr complete all as specified.

M&L for Unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : measurement shall be done after puning down of sand.

Supplying and laying precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified.

M&L for GI tubing Light grade fixed along the pole/under road/along the wall of size 50mm bore with necessary clamps all as directed.

Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia ( 8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 5 of SSR 2009( Part-I).

Notes :- Schedule of Credit amounting to Rs.31,224.00 to be deducted during AOC

M/S CENTRAL REFRIGERATION AND ELECTRICALS

M/S CHETAN PRAKASH GOYAL

M/S BHARTI ENTERPRISES

ANAMIKA CONSTRUCTION