WELCOME MAINTANANCE AND CONNECTED B/R AND E/M WORKS UNDER AGE B/R (CENTRAL), GE (WEST) COLABA, MUMBAI.

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Construction Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes all as specified and directed.

M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed.

M&L for Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

M&L for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed.

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spry 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for ready mix plaster 20-25 mm thick in multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished surfaces even and fair including applying three coats of white wash all as specified and directed.

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s ACC pvt. Ltd / M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/Birla pvt. ltd/ or other approved equivalent make.

M&L for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, all as specified and directed. Name of Manufacturer: M/s ACC pvt. Ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/Birla pvt. ltd / or other approved equivalent make.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on old surface of wall all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling all as specified and directed.

M&L for preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion white or tinted all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of distemper oil emulsion white or tinted all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints

M&L 3mm thick wall care putty on wall all as specified and directed.

M&L for 3mm thick wall care putty on ceiling all as specified and directed.

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints

Dismantling floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off premises out side of MD land all as specified and directed.

M&L for first and premium quality of non skid, ceramic digital “coloured” matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L for Vitrified tiles dark or light shade /double charge of size 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L for Vitrified tiles dark or light shade /double charge of size 600 x 600 x 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Euro,

M&L for heavy duty outdoor vitrified tiles dark or light shade 12-15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro

M&L for first and premium quality of non skid, joint free GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L for first and premium quality non skid, GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed Make : Johnson tiles / Kajaria / Orient Bell

M&L for 8 mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring is a flating glue less click locked & sealed flooring similar ta a jigsaw puzzle.In this method, the idividule planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed all as specified and directed

S&F in repair Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed. Approved sample as kept in GE Office.

M&L in repairs for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab all as specified and directed

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing

Dismantling wrought iron or mild steel of any description not othervise specifically provided for all as specified and directed.

S&F for rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed

M&L in repairs multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

S&F Solid PVC wall Lining/panelling consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed Make : Rajshree/ Navratan or equivalent, sample as approved by GE

S&F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed Make : Rajshree/ Navratan or equivalent, sample as approved by GE

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) M&L for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) S&F GI powder coated tee as main & cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L for 2nd class hard wood (Sal) plain fillets, square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 and not exc 13 sq cm,fixed in repair complete all as specified and directed

S&F 18 mm thick Both Side pre laminated MDF Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets including dismentling any type of board all as specified and directed. Make:- ActionTesa/ Greenply and archidply

M&L for preparing old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as above item No 43 above but two coats of synthetic enamel paint all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per item No 45 above here in before but two coats of synthetic enamel paint all as specified and directed.

Taking down existing wall finishes of any type by vigorously wire brushing, brooming, dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign material making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth all as specified and directed.

S&F in repairs Chromium plated brass angle valve for 15mm bore pipe all as specified and directed.

S&F in repairs, two way angle valve cock chromium plated brass fancy type bore 15mm all as specified and directed.

S&F in repairs two way bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore all as specified and directed.

S&F rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer all as specified and directed.

S&F in repairs Chromium plated brass shower rose 75 mm dia with arm swivel joints, as per sample kept in GE's office all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts all as specified and directed.

S&F in repairs CP brass toilet paper holder, superior quality all as specified and directed.

S&F in repairs CP brass, soap dish, superior quality all as specified and directed.

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed.

Taking up or down steel tubing 15mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

Taking up or down steel tubing 20mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

S&F 15mm bore, steel water tubing, medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F 20 mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket all as specified and directed.

S&F in repairs plastic seat cover black/white premium quality of pattern W.C including fixing divice and Chromium plated nuts all as specified and directed.

S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repairs vitreous china white wash basin table top size 440 x 440x 135 mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand all as Specified and directed. Make :Cera Cat part N0 S2020155 or Hindware/ Parryware, sample as approved by GE

S&F in repairs vitreous china wash down one piece water closet of Pedestal pattern with flushing cistern white including making connection to trap and to flushing pipe and making good to floor all as specified and directed. Make : Hindware agnese S-220 One piece closet Cat part N0 92563 size 705 x 425 x 785 mm or other approved equivalent make. Sample as approved By GE.

S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts all as specified and directed.

S&F in repairs PVC grating doom 125 mm dia with hole fixed to floor /tarp with cement all as specified and directed.

S&F in repairs sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs PVC mirror cabinet, coloured of size 300 x 450 mm fixed with screw and PVC gutty on wall all as specified and directed. Make:Prayag Cat part No : 551 or equvilent as approved.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples all as specified and directed.

S&F in repairs Stainless steel sink 1.00 mm thick with drainage board for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm all as specified and directed.

S&F in repairs 25 mm dia mild steel PVC coating desinger drapry/ curtain rod all as specified and directed.

S&F mild steel PVC coating bracket/ holder for drapry rod fixed with screws all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of smart care damp proof Elastomeric paint alongwith water proofing coating Make : Rain coat (Dr fixit)/Asian Paints smart care damp proof) or equivalent through authorized applicator only including use of scaffoldings all as specified and directed. Make and colour as approved by GE all as specified and directed. Note work : Up to fourth floor.

All as per item No. 76 above but 5th to 12 th floor all as specified and directed. Note : from fifth floor and above

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins all as specified and directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and directed.

S&F figured glass 3 mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Taking down carefully copper/aluminum submain wiring including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

M&L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box along with cover plate and frame, suitable for fixing moduler switch/ socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint,to match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Conduit : Precision/ Prestoplast/ Polycab

All as per serial item no.83 above but for bell point controlled by one switch.

All as per serial item No.83 above but for One ceiling fan by one switch & regulator

All as per serial item No.83 above but for One 3 pin socket point 5 Amps on independent board

All as per serial item No.83 above but for One 3 pin socket point 5 Amps on same board

All as per serial item No.83 above but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLS wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed.

S&F Moduler Switch flush type single pole, one way 6/10 Amp all as specified & as directed.

S&F Moduler Switch flush type single pole, one way 16 Amp all as specified & as directed.

S&F Moduler socket 2/3 pin 6 Amp all as specified & as directed.

S&F Moduler socket 6/16 A 2/3 pin all as specified & as directed.

S&F Moduler stepped type electronic fan regulator 450 watt flush type, two module all as specified & as directed.

S&F Moduler bell push, 2 modue, 10 Amp all as specified & as directed.

S&F calling bell ding dong type 230 volts all as specified and directed

M&L in repairs Sub main wiring with two runs of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB including taking down old unsv submain with all associated fixtures all as specified & as directed by engr-in-charge Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduit shall be measured as one length.

M&L in repairs Sub main wiring with two runs of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Internal DB to DB including taking down old Unsv submain with all associated fixtures all as specified & as directed by engr-in-charge Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

S&F in repairs 20 watt LED 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Havells Model No :20W Bajaj IVORA 20W CDL of Bajaj / havells / Wipro.

S&F in repairs surface mounted 9/10 watts LED tube light fitting and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting all as specified & as directed. Make:- Havells Model No E-lite LED Pride Plus NEO Cat pat NO : 10W Bajaj IVORA 10W CDL of Bajaj./havells/wipro

S&F in repairs 20 watt smart extruded aluminium LED batten high efficiency inbuilt sensorin 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Bajaj No- BCLAB 20W LED PS /Havells / SHAKTI/ Wipro.

S&F in repairs decorative wall mounting fitting, working on 240 volts, 50 hz ac supply fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 WATT all as specified and directed. Make : Havells Cat NO-LHFOECE1PZ18B014/ Bajaj/shakti/crompton

S&F Exhaust fan metal body/Plstic having 70 watt power double ball bearing high speed of sweep size 300 mm, inbuilt bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified & as directed. Make - Bajaj BAHAR 300MM METTALIC GRAY / Havells / CROMPTON.

S&F in repairs LED Mirro light fittngs 2 feet 10w extruded polycarbonate, golden type integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size all as specified and as directed . Make- Philips Cat part No- 91921580323

S&F LED 36 Watt 3000 K/6500K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified & as directed. Make - BAJAJ/Havells / Wipro/ Jaguar

S&F in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL45WLED757 SASYBOPC. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to supply.

S&F in repair DB vertical type 4 way TPN double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / Legrand

S&F in repair MCB TPN 100 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and directed. Make :Havells / Legrand / Schneider / Legrand

S&F in repair sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection all as specified and directed. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair MCB SP 240 volt, 16 to 40 Amps, C series, all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make : Havells / Legrand / Schneider / Indo Asian

S&F in repair MCB SPN 240 volt, 40 to 63 Amps, C series, all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / Indo Asian

S&F in repairs down rod 60 CM long, made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with including drilling in pipe at top and bottom for fixing Fan motor assembly , Painting the with superior quality white colour synthetic enamel paint all as specified & as directed. Make of GI Pipe : Tata / Jinda

S&F for Exhaust fan metal body/Plstic having 70 watt power double ball bearing high speed of sweep size 300 mm, inbuilt bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified & as directed. Make - Bajaj BAHAR 300MM GRAY / Havells / CROMPTON.

S&F Ceiling fan with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC making all electric connection. huck and suitable size rod for hanging ceiling fan all as specified and as directed Make Bajaj/Havell's/CG.

S&F moduler/plastic/steel type junction box with hylam sheet of size 4x4", 4x7" and 6x8" all as specified & as directed.

S&F moduler/plastic/steel type junction box hylam sheet of size 10x12" and 8x10" all as specified & as directed.

Supply and fix moduler/plastic/steel type junction box hylam sheet of size 12x12" all as specified & as directed.

Mayur Enterprises

B P ENTERPRISES

Panther Facilities

SHRI SAI ENTERPRISES

NATH CONSTRUCTION

Ganesh Enterprises

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION

Bidder Name

Mayur Enterprises

NATH CONSTRUCTION

SHRI SAI ENTERPRISES

Panther Facilities

Ganesh Enterprises

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION

B P ENTERPRISES

SHIV ENTERPRISE