REPAIR AND RENOVATION OF TEMPLE IN ARULMIGU VEETRIRUNTHA PERUMAL TEMPLE AT VEPPATHUR

Amount

Providing scaffolding charges for Vimanam/Gopuram with casurina posts coconut or palm trees wherever necessary for main formwork and providing with net lawn/pvc mesh coveribg, providing ladder arrangements, country wood plank for working inspection etc., complete Hire charges only for errection and maintenance and removing the same on completion of work. as per standard specification.

Perumal Sannathi

Scraping the decayed lime plastered from the surface of vimanams and gopuram, carefully including isolated bricks of brick work without damaging the varivargams racking out the joint cleaning the surface with water including all working in heights, hire charges for special tools, brushes etc., complete as per standard specifications. (Upto 50'0" ft)

Perumal Sannathi

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime mortar 1:1.5 (Heritage works) complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime mortar 1:1.5 (Heritage works) and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc., complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area

Perumal Sannathi

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Perumal Sannathi

Providing new sudhai vigrahams in the vimanams and Rajagopurams with coper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in lime mortar 1:1:5 (Heritage work) added 20% of cement finishing the same with lime mortar 1:1:5 (Heritage work) added 20% of cement bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including multicolour painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder)

Above 1'0" and Upto 2'6"

Above 2'6" and Upto 3'6"

Above 3'6" and Upto 4'6"

Scraping the dust pasi from the surface of vimanam/gopuram and clearing the same with water and wire brushes including all working in heights, hire charges for special tools, brushes complete superficial area including all folds etc., complete complying with standard specification.

Perumal Sannathi

Brick masonry Lime mortar 1:1.5 (Heritage works) using Special Brick Size 8" x 4" x 2" including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram

Total

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime mortar 1:2 (Heritage works) complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime mortar 1:1.5 (Heritage works) and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc., complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area

Total

Earthwork excavation for foundation in all soils except hard rock requiring blasting to a full depth with initial lead of 10 m and lift of 2m etc., complete (SS 20B)

Total

Supplying and filling in foundation and basement with filling sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specification including cost of supplying filling sand etc.,complete as per standard specification.

Total

Cement concrete 1:4:8 for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Standard Specification and as directed by the Department Officers.

Total

Providing and laying in position, Standardised concrete mix M-20 grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticier) in recommended proportions as per IS:9103 to accelerate, rated setting of concrete improve workability without imparing strength and durability without (5 cum) 7730kg, of 20mm machine crushed stone jelly and with about (3.30 cum) 5156kg, of 10 - 12 mm machine pressed stone jelly and with about (4.79 cum) 7670kg of sand, but excluding cost of reinforcement grill an fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibraters, finishing, curing etc., and providing fixtures like fan clams in the RCC floor/ roof slabs where ever necessary without clamping etc., complete as per the standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Total

Supplying and fabricating and placing in position MS grills for reinforcement including cost of steel for all works. The rate including cost of binding wire also (SS NO 134)

Total

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Total

Total

Brick work in lime mortar1:2 usingBest Quality of bricks of size 8" x 4 " x 2" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complete complying with standard specification.

I.Basement

Total

II - Super Structure

Total

Brick work in lime mortar1:2 using Second class ground moulded chamber brunt bricks of size 9" x 4 3/8" x 2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complete complying with standard specification.

I- Basement

First Praharam Base and Steps

II- Super Structure

First Praharam Base and Steps

Brick work in cm 1:5 using best Quality II Class Ground Moulded chamber Burnt SIze 9" x 43/8" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complete complying with standard specification.

Outer Thirumadhil Wall - Basement

Outer Thirumadhil Wall

Refilling with Excavated Soil (other than Sand) Compyling with Standard Specification for filling in foundation and Basement

First Praharam Base and Steps

Madras Terrace Roofing With Brick on Edges 75mm Concrete 3 Courses of Flat tiles and 3 Coats of Lime Plaster to top and Bottom

Total

Supplying and paving fixing with New Cut stone of sizes suitable for site requirement not less than 100mm thick size and top surface dressed with machine cut edges inculding pointing lime mortar 1:1.5 including cost and conveyance of all materials and all labour charges etc., complete as per the standard specification. (Closed Roof)

Upto 5 feet length

Total

Upto 5 feet length

Total

Above 10 feet Length upto 14 feet length

Perumal Sannathi

Supply of cut stone for carrying out Garpaharaham, ArthaMandapam, MahaMandapam, Nilaikal (Door Frame) and otherTemple structure above 10 feet length upto 14 feet length including cost and conveyance of all materials to site and labour charges for paving etc.,complete as per standard specification.

Total

Labour Charges For Stone Pavukkal Vari Vargam Excluding Cost And Conveyances of Stone From Quarry But Including all Labours

Total

Clean removal of Cement plaster from the surface of walls raking out the joints 20mm deep and from open terrace raking out the joints 12mm deep etc., complete as per standard specifications.

Perumal Sannathi

Plastering with Lime mortar1:2,20mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Total

Plastering with Lime mortar1:2,20mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

First Praharam Base And Steps

Plastering with Cement mortar1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Outer Thiru Madhil Wall

Flooring with cut stone slab 600mm x 600 mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the department officers including cost and conveyance of all materials to site and labour charges for paving and pointing with Lime mortar 1:1.5 etc.,complete as per standard specification.

Total

Supplying & fixing Teak wood temple type door (Temple pattern ornamental doors with high quality teak wood (country) with 2" minimum to 7" maximum thick ornamental frames, 2" thick to 5" thick kamala (flower planks), creeper, birds, animal figures sculptures, etc., back side 1" thick to 3" plank including necessary carving, shaping, wastage, etc., as per approved plan and design. (page.no.163, 2a)) including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc., complete complying with standard Specifications.

Door Size 4'0" X 7'0" = 28 sqft

Total

Door Size 6'0" X 10'0" = 60 sqft

Perumal Sannathi

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Antralam, Mukhamandapam

Supplying and Fixing Wood Rafter Including cost and Conveyances of all materials and all labour charge etc. complete as per the standard Specification

Perumal Sannathi

Supplying and fixing of country wood plank including cost and Conveyances of all material and all labour charges etc. Complete as per the Standard Specification

Perumal Sannathi

Supplying and fixing steel grill gate including cost conveyances of all material and fixing in position including Priming coat etc , complete

Total

Supplying and fixing in position steel balustra des using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and separately) by means of MSflats of size 40mm x 6mm in the groove 40mmx6mm provided at the bottom of hand rail, the bottom of balustra des shallbe fixed on tothe top of step concrete. An additional MSflat of size 50x 6mm shallbe provided at the centre balustrades connecting all square rods to the centre length including cost of square rods,flat and applying one coatof red oxide primer to the iron surfaces, etc complete complying with stan dard specifications.

First Praharam Base and Steps

Painting two coats with approved water based exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Total

Best varnish two coats for wood works etc, complete complying with standard specifications.

Total

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide and one coat of Zinc chromite primer in all floor etc, complete complying with standard specifications.

Total

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting (SD 88)

supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD -447)

Supply and fixing of fancy glass shade and 7W / 9W LED bulb (SD 79)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD -106)

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains (SD 67)

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD -72)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour (SD 56)

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour (SD 60)

Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only (SD -148)

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD -534)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) (SD -151)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection (SD 129)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 212)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Sub total

Sthapathy (BID ID -1415219)