KMDA/EM/SE/EC-II /NIQ-01/ 2025-26

Amount

Supply, Installation, Testing and Commissioning of BIS certified architectural square/round flood light min. (IP66) with with following specifications: beam angle narrow,medium,wide as per site requirement, CCT RGBW 4IN1, operating on 100-240V AC 50/60Hz power supply. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using DMX based control. Power supply should be integral part of the luminaire and should have >60% efficiency with power factor of >0.90. Extruded /die cast alumunium housing & clear glass cover housing. Lumen maintenance of 70% at 50000 burning hours at 35 deg c. Fixture should have constant locking hinges for simple position control from various angles without special tools. Luminaires includes (should be of the same material and color as of luminaire) mounting arrangment and other required attachements & hardware to complete the job in all respects. To be supported with Product test reports RoHS, CE, BIS Report and LEDs Test Reports, LM80 certificate form LED manufacturer. Luminaire shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. including all accessories for installation, testing and commissioning as required to complete the system.

min.180-200 Watt

min. 80-100 Watt

Supply and installation of antitheft protective metal cage for lights.

Supply, Installation, Testing and Commissioning of high quality RGBW Neon Flexible light, Protection Rating : IP67, Mounting Structure : Adjustable wall mount SS clips for fixing the lights. Power consumption : min.14W, CCT : RGBW, Beam Angle : >110º, Control : DmX512 Channel external decoder : 4 CH, Power Input : DC 24V with external driver, Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade.

Supplying, Installation, Testing & Commissioning of Aluminium Profile for strip Lighting including all accessories, size as per site requirement

SITC of DC power driver for the above Lights, Power : min.200W, Input : AC 110-240V AC, 50Hz, Output : DC 24V, Protection rating, IP67, Surge protection :4KV

Supply, intallation, testing and commissioning of 4/6Channel DMX decoder for strip lights with 24V DC, IP20

Supply, Installation, Testing and Commissioning of Power loop cable of minimum 1500mm length with waterproof IP67 rated male female connectors for Light Fixture

Supply, Installation, Testing and Commissioning signal loop cable of minimum 1500mm length with waterproof IP67 rated male female connectors for Light Fixture

SITC of Grid mount photo isolator DMX Amplifier unit with 1 input and 8 isolated output for signal amplification shaping capabilities extend signal transmission distance with following specifications: Power Supply: 90-240V AC, 45-63Hz. Control: DMX 512 Control Signal input: 5 pin XLR female, Size: 482 x 44 x 145mm , Weight: 2Kg. To be supplied with IP rated weatherproof box.

Supply & Programming of Digital Lighting Console with 2048 DMX channels(4*DMX512 universe), bi-directional and optically isolated 4 DMX ports. Controller should have min 8 palyback capacity. Programming is done through its dynamic web interface. should have 10/100M Ethernet port, MIDI IN + OUT, USB, 4x GPI port. Controller should also be compatible with typical lighting protocols such as DMX- 512, Art-Net, sACN and KiNet. Controller should be fitted with a fluent master-slave protocol for synchronising multiple units for large lighting systems.

Supply and laying of PVC insulated multi core electrical un armoured flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.(As per actuals depending upon the site condition)

Supply and laying of PVC insulated multi core electrical un armoured flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.(As per actuals depending upon the site condition)

SITC of 4 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission

Supply, Installation, Testing and Commissioning of Direct Lighting Distribution Board with TPN incomer of suitable 100Amp.rating and and 18 way 20Amp.each outgoing SP MCBs of suitable rating with IP54 Rating Enclosure.

Supply, Installation, Testing and Commissioning of IP66 plain junction Boxes/cable junction boxes to accommodated LED Driver,decoder equipped with IP66 gland of suitable size for cabling, also for multipule outgoing of power line.

Supply, Installation, Testing and Commissioning of IP65 Floor mounted Enclosure (design as approved by EIC) to accommodated controller and splitter equipped with IP66 gland of suitable size for cabling.

Supply, Installation, Testing and Commissioning of additional accessories for installing the lights as per the final drawing/site condition consisting of clamps, brackets, angles, conduits, joints, hardware's like fasteners, nut & bolts, Internal earthing etc.

Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160A, L&T

Supply & Delivery of 1100 volt Grade PVC/XLPE insulated armoured/unarmoured aluminium/cu conductor cables of following sizes: 3.5Cx70 sq mm Al. unarmoured.

Supply & Delivery of 1100 volt Grade PVC/XLPE insulated armoured/unarmoured aluminium/cu conductor cables of following sizes: 1Cx50 sq mm Cu. Conductor

Supply & Laying of 50 mm High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]

Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3½ core 70 sqmm cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3½ core upto 70 sqmm

Supply & Fixing 3 Pole Power Contactors Conforms to IS / IEC 60947-4-1 & IEC 60947-4-1, AC1:160A, AC3:95A.

Supply and fixing of Quartz Daily Time Switch Used for Automatic switching ON/OFF for Electric street lights, 30-minute Interval with 24-hour Programmable operation 240 VAC Base/DIN Mounting.

Supply and fixing 415V, 200 Amps rewireable type porecelain fuse unit.

Hire charges of Escorts Hydra including fuel & driver for restoration work as and when required.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 6 SWG

Attending, Inspection, guarding of RGBW Light points, LED Neon flex Light in every morning and evening to ensure uninterrupted glowing of points including switching ON/OFF operation, restoration of fault, repairing & replacement of spares including all type of maintenance job, contact to CESC for power restoration as and when required and report of total glowing and unglowing points of the site to EIC in once in a week and necessary activities including Programming of Digital Lighting Console as per requirement as per technical specification & satisfaction of EIC..

Supply, delivery & installation of following items of CCTV system as per direction and satisfaction of EIC:

4 MP HD IR Range of 150Mtrs. IP 25x PTZ Camera (Make- Hikvision or CP Plus or Dhaua or equivalent)

16CH NVR 4SATA HDD 4k (Make- Hikvision or CP Plus or Dhaua or equivalent)

Serveilance 4TB HDD (Make- Daichi or Toshiba or WD or equivalent)

4 PORT PoE SW 100MBPS (Make- Digisol or CP Plus or equivalent)

Dual core Media Converter (Make- Digisol or CP Plus or equivalent)

32 inch Commercial Monitor 24x7 (Make- LG or Lenovo or Intex or equivalent)

CAT6 UTP Patch cord 2M

CAT6 UTP cable-300M (Make- Digisol or D Link or equivalent)

SM 6F Optic fiber cable

XPON/ONU 100MBPS

Wall Mount network 6U RACK (Make- Digisol or D Link or equivalent)

Power Supply unit with 25A MCB

Laying charge OFC

Installation Charge

ANAMICA ENTERPRISE (BID ID -6704475)

Leksa Lighting Technologies Pvt. Ltd. (BID ID -6714344)