SPECIAL REPAIR TO CONVERSION OF OH CONDUCTOR TO UG LT CABLE ALIED WORKS IN 313 COY ASC SUP AND PROVN OF EXHAUST FAN QTY 94 AT E BLOCK AT 41 VEH COY UNDER GE NARANGI

Amount

Dismantling of ACSR or AAC conductors of any size or disturbed span including Jumpers and serviceable materials setting aside and keep safe custody for reuse or credit, complete all as specified and as directed.

Dismantling cross arms of MS channel or angle sections etc. and serviceable materials setting aside and keep safe custody for reuse or credit, complete all as specified and as directed.

Dismantling insulators from LT and/or HT Poles of any type, any size and serviceable materials setting aside and keep safe custody for reuse or credit, complete all as specified and as directed.

Dismantling unserviceable/broken, LT poles, any size, any description including demolition of cement concrete and earth work as required and serviceable materials setting aside and keep safe custody for reuse or credit, complete all as specified and as directed.

Dismantling of existing LT Stay Assembly including loop insulator etc. of any size/length and removal of stay rod above ground levels,including demolition of cement concrete and earth work as required and serviceable materials setting aside and keep safe custody for reuse or credit complete all as specified and as directed.

Supply and fixing LED street light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥120 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection device upto 5 kV including taking out old unserviceable luminare complete including taking down existing light fittings, and serviceable materials setting aside and keep in safe custody for reuse or credit, all as specified and as directed.

Supply and fixing LED flood light of capacity 250 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have LED efficacy ≥100 lumens/watt,CRI>70 PF 0.95,CCTCCT≥5500,IP66,impact resistance IK 07 ,inbuilt 5kV surge protection device complete including taking down existing light fittings, and serviceable materials setting aside and keep in safe custody for reuse or credit, all as specified and as directed.

Materials and labour for erection of steel tubular steel tubular swaged pole type 410 SP - 31 (9.00 metres long) including cast iron base plate, finial taper plug including applying two coats of aluminium paint and making strip upto 1.5m above ground level by black/yellow synthetic paint in alternate layers and numbering of poles complete all as specified and as directed.

Materials and labour for complete removal/ scrapping out of existing/old paint and preparing old painted/treated steel tubular poles 9.00m long with emery paper including cross arms, street light brackets etc. of any description, not otherwise described, over 10cm width or girth, and applying two coats of aluminium paint and making strip upto 1.5m above ground level by black/yellow synthetic paint in alternate layers and numbering of poles complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 150 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 120 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 95 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 3½ core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Excavation in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth, for taking out/laying of Cables, etc. and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches, exc. 1.5m wide and n. exc. 3m in depth, for taking out/laying of Cables, etc. and getting out in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil, complete all as specified and as directed.

Removing Excavated materials in trenches, n. exc. 50m and depositing where directed at a level n. exc. 1.5m where the starting point, complete all as specified and as directed.

Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and as directed.

Supply and laying well burnt bricks, sub class ‘B’ brick laid breadth wise long length of cable in trenches after sand cushion laid for under ground cable protection, complete all as specified and as directed.

Materials and labour for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Materials and labour for PCC 1: 3 : 6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work for coping to the new/existing steel pole complete all as specified and as directed.

Materials and labour for manual boring 50mm dia galvanised iron pipe under the roads/hard standing without disturbing the top surface for passing through UG cable complete all as specified and as directed. Note: Galvanised iron pipe shall be measured and paid separately.

Materials and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed.

Materials and labour for GI pipe light grade 50mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed.

Materials and labour for GI pipe light grade 80mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed.

Materials and labour for connection of junction box to street light luminaire using wiring with two runs (P-N) of single core 1.5 Sqmm (nominal area) FR PVC insulated and unsheathed multi-stranded copper conductor cable 1100 volts grade and one run of FR PVC insulated and unsheathed multi-stranded copper conductor of size 1.5sqmm single core as earth continuity wire drawn through PVC conduit(Heavy grade) and tiding the same by aluminium strip with the pole complete all as specified and directed. (Two single core 1.5 Sqmm cable and one single core 1.5 Sqmm earth conductor cable and one run of PVC conduit shall be measured as one run).

Supply and fix street light junction box of size 205 x 255 x 112mm made of high quality polycarbonate with IP-66 protection (Dust and vermin proof according to IEC-60529) Totally insulated made of halogen and silica free recyclable material having high quality gasket made out of polyurethane with MCB, DP, 10KA, 6 Amps to be fixed on Din rail , with locking arrangement with cable gland suitable upto 25 to 35 sqmm cable and necessary fixing arrangements such as clamps, nuts, bolts etc all as specified & directed by Engr-in-Charge. Make : Hensel Cat No -KF-1616B.

Materials and labour in repair earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6 mm thick burried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised earth lead by means of bolts nuts, check nuts and washers of galvanised iron or steel using GI strips 32 X 6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earth test point all as specified or indicated including GI pipe 40mm bore(dia) for earth lead protection ' light grade', GI pipe 20mm Bore(dia) ' Medium grade' for watering including necessary excavation any type of soil, RCC chamber cover plate, wire mess, funnel, etc complete and testing on completion.

Supply and fixing Street Light Fittings Bracket made out of 40mm dia GI pipe, light grade 1.50 METRE long, bend to required shape and fixing to Poles, Walls, etc. with MS flat iron Clamps, Nuts, Bolts, Washers, etc. duly painted with two coats of aluminium paint over a coat of red oxide primer including taking down unserviceable brackets, complete as specified and as directed

Supply,fabrication and installation of CPRI, type tested LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders, made of CRCA of 3.15 mm thick MS sheet power coated (minimum 50 micron thick) of suitable size with support of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size IP-56 with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar for TPN LT AC, 50 Hz ,415 V, 600 Amp capacity complete with powder coating, with accomodating with including following items:- Incoming:- (a) MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA-01 Outgoing: (a) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA-02 (b) MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA-03 (c) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (d) LED indicating lamps with colour Red, Yellow, Blue - 01 Set

Supply,fabrication and installation of CPRI, type tested LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders, made of CRCA of 3.15 mm thick MS sheet power coated (minimum 50 micron thick) of suitable size with support of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size IP-56 with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar for TPN LT AC, 50 Hz ,415 V, 400 Amp capacity complete with powder coating, with accomodating with including following items:- Incoming:- (a) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA-01 Outgoing: a) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 36 KA-05 (b) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (c) LED indicating lamps with colour Red, Yellow, Blue - 01 Set

Supply,fabrication and installation of CPRI, type tested LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders, made of CRCA of 3.15 mm thick MS sheet power coated (minimum 50 micron thick) of suitable size with support of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size IP-56 with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar for TPN LT AC, 50 Hz ,415 V, 400 Amp capacity complete with powder coating, with accomodating with including following items:- Incoming: (a) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA-01 Outgoing: (a) MCCB 4 Pole, 415 V, Adjustable type, 163 Amps with breaking capacity 36 KA-01 a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 36 KA-01 a) MCCB 4 Pole, 415 V, Adjustable type,63 Amps with breaking capacity 36 KA-02 b) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs c) LED indicating lamps with colour Red, Yellow, Blue - 01 Set

Supply,fabrication and installation of CPRI, type tested LT Panel Board floor mounted outdoor cubical type with compartments for each out going and incoming feeders, made of CRCA of 3.15 mm thick MS sheet power coated (minimum 50 micron thick) of suitable size with support of 50 x 50 x 6 mm angle iron bottom legs frame with double hinged with front and rear opening, hinged doors with projected an raised platform of suitable size IP-56 with necessary locking arrangements along with lugs, cable glands of various sizes for existing cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS tinned Aluminium bus bar for TPN LT AC, 50 Hz ,415 V, 400 Amp capacity complete with powder coating, with accomodating with including following items:- Incoming: a) MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA-01 Outgoing: a) MCCB 4 Pole, 415 V, Adjustable type,63 Amps with breaking capacity 36 KA-04 b) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs c) LED indicating lamps with colour Red, Yellow, Blue - 01 Set

Materials and labour for jointing heat shrinkable after removing faulty cable , straight joints for PVC armoured heavy duty underground cable including joint kits complete for making joints suitable for aluminium Conductor cable 25 to 50 sqmm 3½ core 1100 volts grade and necessary testing after jointing, complete all as specified and directed.

Materials and labour for jointing heat shrinkable 1100 volts XLPE straight joints for PVC armoured heavy duty underground cable including joint kits complete for making joints suitable for aluminium Conductor cable 70 to 120 sqmm 3½ core 1100 volts grade and necessary testing after jointing, complete all as specified and directed

Supply and jointing heat shrinkable 1100 volts XLPE straight joints for PVC armoured heavy duty underground cable including joint kits complete for making joints suitable for aluminium Conductor cable 150 sqmm 3½ core 1100 volts grade and necessary testing after jointing, complete all as specified and as directed

Materials and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed.

Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed

Supply and fix ceiling rose, surface type 3 phase/PVC/polycarbonate, isolated body, 65x50 mm two to three terminals with ISI marked complete all as specified and as directed.

Supply and fix exhaust fans AC single phase 230/ 240 V ,50 Hz metallic heavy duty body of size 300 mm sweep, 1400 RPM with louver shutter fixed with 4 no hold fastener nut and bolt with washers and connecting with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm including cutting holes in wall with core cutter and making good surface complete all as specified and as directed.

Supply and fixing MCBs, SP 6 to 32 Amps, 10 kA breaking capacity , 'C' curve miniature circuit breaker including connection with suitable size aluminum/copper lugs to be fixed in existing DB complete all as specified and as directed.

M/S VSL INFRA & TRADE (BID ID -3442701)

PURBANCHAL BUILDERS (BID ID -3440606)

Rana Kr Phookan (BID ID -3438822)