Providing M/T Works to Mural Virgarh Road Km 0/0 to 0/850

Amount

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning the road surface with hydralic broom and spraying primer at therate 0.85kg (zero point eight five kilogramme) per square metre using mechnical means as per MORD Technical Specifictions Clause 502 by mechanical means and as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per square metre on the prepared granular surface and cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 by mechanical means as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.

Providing, laying and rolling of open-graded premix carpet of 20 mm (twenty milimeter) thickness composed of 13.2 mm to 5.6 mm (thirteen point two milimeter to five point six milimeter) coursed stone aggregates @ 0.27 Cum (zero point two seven) cubic meter mixed with 14.6 kg (Forteen point six) kilogramme per 10 (ten) Sqm bitumen VG-10( viscosting grade ten) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying with paver finisher and rolling with a three wheel 80-100 kN (eighty to hundred) static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per Technical Specification Clause 508 VG-10( viscosting grade ten). including all leads and lifts as per directions of Engineer in Charge.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B VG-10 as per Technical Specification Clause 510 ( viscosting grade ten) at the rate of 6.8 ky (six point eight kilograme) per 10 (Ten)square meter by mechanical means including all leads and lifts as per directions of Engineer in Charge.

RAJESH JHOUTA