Electrification and supplying and fixing of electrical components for the efficient functioning of the Baridevarakoppa wettwell

Electrification and supplying and fixing of electrical components for the efficient functioning of the Baridevarakoppa wettwell

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500 Kg WL 1.07

Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA(UG Cable) MS

11 KV, 5KN composite/Polymeric Pin Insulator

(24mm Dia FP Rod)

Alkathene Tube 19 mm Dia and in coils of 30 Mtr- By Agency

GOS 11 kV, 200 Amps Single Break GOS

(Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) ESCOMs SR 2023-24 Page No 347 [I.No:24.01

fixing GOS Fixing of GOS including wiring (11 kV Single Break 200 Amps ESCOMs SR 2023-24 [Pg.No:384 I.No:13.02]

Errection of Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500 Kg WL

Errection of Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA (UG Cable) MS

Base concreting 1:4:8, 1000x1000x150 mm

Pole concreting 1:2:4, 1000x1000x2500 mm

Coping 1:2:4 (as per actuals)

Dismantling RCC Pole - 9 Mtr Long, 145 Kg WL

Granular Aggregates Granular Aggregate40 mm down size

11 kV, 3 Core, XPLE HTUG Cable with

pressure extruded inner sheeth, ROUND

WIRE ARMOURED as per IS-7098 (Part-2)

Armouring wires dia and Resistivity as per

IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Di...

11 kV, Jointing & Cable Termination Kit as

per IS-13573 Heat Shrinkable Type Transition Jointing Kit for XLPE Cable 3x95 Sqmm45.01

Heat Shrinkable Outdoor Type Cable Termination

Kit for XLPE Cable45.07

HDPE/PLB Pipe 50/42 mm66.04

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,

3.2 mm thick with bolt, nut, GI Strips and washer

Minimum Weight of GI Pipe: 7.3 Kg51.01

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg

Good Quality Salt for grounding purposes packed in 50

Kg gunny bag51.03

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

Wooden/Aluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm21.01

Cable Joint and wiring (for HT & LT UG Cable)3x95 to 3x150 Sqmm22.01

Making and Fixing pot head for HT Cable only 3x95 to 3x150 Sqmm22.04

Earth work excavation for pipeline trenches in

all kinds of soils by mechanical means above 600

mm (Depth upto 1.50m not exceeding 1.5m in

width ) trench width as per drawing and technical

Refilling available earth around trenches/pipelines, cables in layers not

exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m1.1

HG Fuse Unit as per IS-5350 Part-2 11 kV, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)20.01

Lightning Arrester as per IEC-60099-4 10 kV, 5 kA Lightning Arrester Polymeric type with

GROUND DISCONNECTOR19.02

Digging of Pit for providing GI Pipe type Earthing1.6.1

RCC Poles RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 ESCOMs SR 2023-24 [Pg.No: 339 I.No:1.01

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ESCOMs SR 2023-24 [Pg.No: 380 I.No:2.02

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil ESCOMs SR 2023-24 [Pg.No: 379 I.No:1.1.1

Spiral Earth Electrodes as per standard technical specification as per BESCOM.

ESCOMs SR 2023-24 [Pg.No: 340 I.No:2.16

H - Frame Set for fixing 11 kV, 200 Amps Single Break

GOS - (For DP structure for providing New GOS for

sectionalisation) - MS

DP Set (2 Pole Strucrure Kit) as per IS-1977For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS (Dwg No. BESCOM/GM/QS&S/35 & 63 Dtd 24.11.2018 26.01

LED Street light 70 W Supply of LED Streetlights luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with ...

Fixing charges Of Street Lights Fittings Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity w...

Control Box For streetlight Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), ru...

Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting.PWD Ele SR 2-23-24 Page:21 Item...

Contactor Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD Ele SR 2-23-24 Page N...

Fuse Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts andwashers. 32 A PWD Ele SR 2-23-24 [Pg. No.14 I.No: 5.7.2 ]

Hylum Sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. Dimension 46x32...

MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ...

Lightning Arrester 10 kV, 5 kA Lightning Arrester Polymeric type with

GROUND DISCONNECTOR

ESCOMs SR 2023-24 Page No 345 [I.No:19.02]

Fixing Lightning Arrester Lightning Arrester, Metal oxide,10 kV, 5 kA Polymeric Type with ground disconnector

ESCOMs SR 2023-24 Page No 384 [I.No:13.06]

LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...

LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...

Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. ESCOMs SR 2023-24 Page No 388 Item No 21.05

Mulit strand 2 Core Copper Wire SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitablefo...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supply and fixing of Multifunctional three phase monitoring relays suitable to monitor three phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as ...

Rotary handle for MCCB 5.55

SupplyingandfixingofLEDtypepanelboardindicatinglampwith required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38

Supplying,fixingandwiringrotaryselectorswitchsuitableforAmmeter 5.27

Supplying,fixingandwiring3PhaseDigitalAmmeter/Voltmeter 5.29

MCCB 250 Amps 65.11

Supplying,fixingandwiring0to100ADirectReadingACanalogtype Ammeter 5.25

Supplying,fixingandwiring0to30ADirectReadingACanalogtypeAmmeter 5.24

Supplying.Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM...

Supplying.Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM...

Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10Kandcompletewiringa...

Supplying, fixing andwiring heavy duty lowvoltage capacitors conforming toIS2834. 3phase, 400/440Vgrade, for power factor improvement of rotating machineries like induction motor.

Work of servicing, leak arresting and oil filtration upto 400 KVA power transformers as specified below: a. Removing cable connection of transformer after isolating the supply dismantling the cable co...

Fabricating supplying and mounting made out 16 SWG suitable for floor /wall mounting, fully weather proof

with provision for better heat dissipation, provided with hinged front cover, equipped with t...

Supplying, installation, testing & commissioning of 12V .AH

batteries inpolypropylenecontainer forD.G. sets.Lowmaintenance

batteries, plate type. 150 AH capacity

Supplying of diesel generator engine lubrication oil

Supplying of coolant for diesel engine

Supplying of Air filter (inner)for 125 KVA DG

Supplying of Air filter (Outer)for 125 KVA DG

Supplying of water separator for 125 KVA DG

Supplying of fuel filter for 125 KVA DG set

Supplying of oil filter for 125 KVA DG Set

Labour charges for general servicing and overhauling, water wash and diesel tank cleaning, testing, fitting, oil changing, and load trial of generator at site. Ensuring proper working of generator. Fo...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prime...

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prime...

Measuring Equipment CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle50-150 KW) ES...

HT & LT Metering Equipment LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) ESCOMs SR 2023-24 Page...

Erection of HT Metering Cubicle LT Metering Cubicle, LT Feeder Piller Box, LT Distribution Box HT Metering Cubicle, LT Metering Cubicle ESCOMs SR 2023-24 Page No 47 I No 9.02

DTC MS Box For Distribution Transformer Centre (DTC)

MS Box for housing the ETV Meter 3 Phase

4 Wire 5 Amps, with associated LT CT 0.5

Accuracy Class, ring type, with wiring

Clamps, B&N and all ot...

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC ESCOMs 100 kVA TC SR 2023-24 Page No 47 I No 11.02

Measuring Equipment LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering) SR 2023-24 Page No 23 I No 53.05

Fixing of LT Metering Box with clamping arrangement for mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for housing the ETV Meters and connecting to the...

LT Distribution Box LT Distribution Box for 100 kVA DTC with MCCB's

(Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) ESCOMs SR 2023-24 Page No 9 Item No 18.01

Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring) ESCOMs SR 2023-24 [I.No: 9.07

120 Sq MM Aluminium Wire 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 Al Wt: 32 Kg, Total Wt: 45.5Kg/100 Mtr Coil PWD Ele SR 2-23-24 P...

Copper Lugs Heavy Duty Copper Terminal Long Barrel 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm ESCOMs SR 2023-24 Page No 362 [I.No: 59.06]

PG Clamp Rabbit to Insulated Wire 120 Sqmm

(Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018) ESCOMs SR 2023-24 Page No 342 [I.No:10.02]

LT Line Spacer For TC Wiring ESCOMs SR 2023-24 Page No 349 [I.No:30.03]