REPAIR REPLACEMENT TO WOODEN JOINERY CEILING WALL PANELLING AND CONNECTED ITEMS IN CERTAIN BUILDINGS OF SECTOR D INCLUDING INTERNAL ELECTRIC WORKS UNDER AGE BR I OF GE 865 EWS

Amount

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed.

S & F anodised aluminium frame of standard section for doors, windows, ventilators with double rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.

M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.

M & L for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs, excluding hinges, lock strike plate etc, complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete (Glass shall be measured and paid Seperately) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour for PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in hold fast bed block and like including dismantling of any description complete all as specified and directed.

S&F 30 mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats, complete all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, Supply and fixed to chowkats, complete all as specified and directed.

S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh shall be measured and paid seperately) complete all as specified and as directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovatiled or welded (Glass shall be measured and paid Seperately) complete all as specified and directed by Engineer-in-Charge.

M&L sheet glass 4.8 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane including Hacking out old broken glass complete all as specified and as directed.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane including Hacking out old broken glass complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F stainless steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg complete all as specified and as directed.

M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed.

S & F brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position complete all as specified and as directed.

S & F in repairs Harrison rails, anodised aluminium alloy with fixing brackets, stops rollers in repair etc complete all as specified.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng of existing complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantlng of existing complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng of existing complete all as specified and as directed

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work, including dismantlng complete all as specified and as directed.

Ditto all as per item no 43 but on ceiling including dismantlng complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng complete all as specified and as directed.

Ditto all as per item no 45 but on ceiling including dismantlng complete all as specified and as directed

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng complete all as specified and as directed.

Ditto all as per item No 47 above but on ceiling including dismantlng complete all as specified and as directed.

M&L French polishing on wood or wood based surface of any width or girth or any description, including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified by manufacturer including dismantlng complete all as specified and directed.

S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed.

M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufacture instructions including Dismantlng complete all as specified and directed.

M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light/exhaust point controlled by one switch with PVC insulated multistranded and unsheathed 1100 volts copper conductor cable of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet on wooden board of any size including taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete including fixtures and fittings such as switches, ceiling, regulator, sockets etc and removing materials to store and making the surfaces good with existing treatment complete all as specified and directed.

All as per Item No 55.00 here-in-above but for one 3 pin socket outlet, 5Amps, 230 volts on the same board with other switches, with cables 1.5 Sqmm size complete all as specified and directed.

All as per Item No 55.00 here-in-above but for one 3 pin socket outlet, 5 Amps, 230 volts Independent board, with the cable 1.5 sqmm size complete all as specified and directed.

All as item No. 55.00 here-in-above but using cables 4 Sqmm for one 3/5 Pin Socket outlet 15 Amps & 5 Amps complete all as specified and directed.

S&F in replacement for Modular switch one way 6 Amp 1 module 230 volts, 50 HZ supply complete all as specified and directed.

S&F in replacement for Modular switch one way 20 Amp 1 module 230 volts, AC Supply complete all as specified and directed.

S&F in replacement for Modular socket outlet 6 Amps, 2/3 pin combined 2 module 230 volts complete all as specified and directed.

S&F in replacement for Modular socket outlet 6 /20 Amps, 3 pin combined 2 module 230 volts complete all as specified and directed.

S&F in replacement Modular switch, bell push, 6 amps one module, 230 volt, 50 Hz supply complete all as specified and directed.

S&F in replacement Modular blanking plate 1 module complete all as specified and directed.

S&F in replacement for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

S&F in replacement for lamp holder PVC/Polycorbonate type insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement for door Bells electric Ding- dong/ musical type single phase 230 Volts complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure SP with two pin and earth plug and socket including metal clad to with one single pole MCB 20/32 Amps complete all as specified and directed.

Supply and fix in replacement batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light, polycarbonate housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fix in replacement bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed.

Supply and fix in replacement bracket for security light made up of 25/40mm dia suitable for security light, 0.6 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fix inverter LED security light luminaire 30 watt, pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with 4 hours battery back up all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.

Supply and fix recess/ surface mounted LED flat panel 2' x 2' CRCA powder coated, 36 watt, IP20 with battery back up with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fix Inverter LED tube light fitting 1x20 Watt with minimum 04 hours battery back up integrated aluminium batten with diffuser and including 20 Watt LED hight efficient , AC 220-240 V, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fix in replacement inverter LED bulb B-22 cap with opal diffuser, IP20 and inbuilt battery back up of 10 Watt capacity complete all as specified and directed.

Material and labour for sub main wiring alongwith earth wire with FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit with size 2x6.0 sq. mm +1x6.0 sq. mm earth wire complete all as specified and directed.

Material and labour for sub main wiring alongwith earth wire with FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit with size 2x4.0 sq. mm +1x4.0 sq. mm earth wire complete all as specified and directed.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type,125 Amps, 25 KA as incomer and MCBs as outgoing complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type,100 Amps, 16 KA as incomer and MCBs as outgoing complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.

Supply and fixing in repair SPN distibution board 8 way, double door, IP43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all complete all as specified and directed.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz, breaking capacity 10KA, 'B' curve 6 to 32 Amps, ISI marked complete all as specified and directed.

Supply and fixing in repair MCB SPN 63 Amp, 10 KA C Curve 240 Volts AC ISI marked complete all as specified and directed.

Supply and fix in repair MCCB four pole 415 volts, 160 Amps, 25KA, 50 Hz, thermal release adjustable type with setting upto 70% complete all as specified and directed.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular of size 10 Sqmm including all incoming and outgoing connection with proper size of thimble complete all as specified and directed.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular of size 16 Sqmm including all incoming and outgoing connection with proper size of thimble complete all as specified and directed.

Supply and fix in replacement PVC insulated, unsheathed cable 2.5 Sqmm single core 1100 volt grade with multi stranded copper conductor complete all as specified and directed.

Supply and fix in replacement Cable PVC copper conductor flexible twin core 0.75mm complete all as specified and directed.

Schedule of Credit

M/S UNITED CONSTRUCTION CO. (BID ID -3285982)

ABID CONSTRUCTION COMPANY (BID ID -3286520)

VIMAL TRADERS AND SUPPLIERS (BID ID -3286663)

PARIDHI CONSTRUCTION (BID ID -3286476)

M/S Stanzin Tharchin (BID ID -3284522)

Rampal Singh Contractor (BID ID -3285464)

SUMEET TRADING CORPORATION (BID ID -3286353)