Loading
Loading…
Loading…
Tender Value
₹15.4 L
EMD Value
₹46,300
Closing Date
17 Oct 2026, 11:00 am
Executive Engineer PHE GWDS
Executive Engineer PHE GWDS, Baghi Ali Mardan Nowshara, Srinagar
Construction of Deep Bore well 200 mm dia by ODEX method at Wasoora, in District Pulwama.
2026_PHE_326756_1
e-NIT No 70 of 2026-27
Open Tender
Drilling Works
Percentage
45 days
Wasoora, in District Pulwama.
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Ex. Engineer PHE GWDS
₹46,300
1 Oct 2026
1 Oct 2026
19 Oct 2026
1 Oct 2026
17 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cost on account of hiring charges of Hydro geologist/Geologist by firm for ground water feasibility survey and furnishing of geologist's report to the department. Job also includes resistivity test by latest equipment for identified site and subsequently furnishing of report to the department before construction of production well is taken in hand by the firm. | 1 | Job | 20,000 | ₹20,000 |
| 2 | Boring/drilling bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS 2800 (Part 1) by fixing case drive shoe including collecting samples from different strata, preparing & submitting strata chart/bore log including hire & running charges of all equipment, tools, plants and machineries required for the job, all complete as per direction of Engineer-in-charge up to 90 m depth below ground level. | 90 | Mtr | 7,400 | ₹6,66,000 |
| 3 | Boring/drilling bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS 2800 (Part 1) by fixing case drive shoe including collecting samples from different strata, preparing & submitting strata chart/bore log including hire & running charges of all equipment, tools, plants and machineries required for the job, all complete as per direction of Engineer-in-charge beyond 90 m depth and up to 106 m depth below ground level. | 15 | Mtr | 7,800 | ₹1,17,000 |
| 4 | Supplying and assembling in bore well, ERW (Electric resistance welded) Fe 410 mild steel, screwed and socket/plain in hand casing pipes of required dia, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths as per direction of Engineer-in-charge. 200 mm nominal dia. having wall thickness of 7.1 mm (or as per IS code) etc. | 105 | Mtr | 5,600 | ₹5,88,000 |
| 5 | Development of tube well in accordance with IS: 2800 (Part I) and IS: 11189 to establish maximum rate of usable water yield with constant head (beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level and draw down etc. by step draw down method, collecting water samples and getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire and labour charges of air compressor, tools and accessories etc. all as per direction of Engineer-in-charge. | 1 | Job | 1,50,000 | ₹1,50,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.14 MB
BOQ_1105331.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .