ADDN / ALTN TO BLDG NO NP-18 (CENTRAL MI ROOM) IN GARHI AND SPL REPAIR TO CEILING FAN, EXHAUST FAN AND VENTILATION ITEMS AGAINST BER UNDER GE (S) UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-In-charge.

Surface excavation in soft /loose soil n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil , complete all as specified and directed by Engr-In-charge.

Excavation over areas n exc 1.5 m deep and getting out in any type of soil, complete all as specified and directed by Engr-In-charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out in Hard soil, complete all as specified and directed by Engr-In-charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation, complete all as specified and directed by Engr-In-charge.

Demolition of brick work built in cement mortar , complete all as specified and directed by Engr-In-charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , complete all as specified and directed by Engr-In-charge.

M & L for flat and curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed by Engr-In-charge.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions. Rough finished Add for fairsurfaces of finished Square, Circular rectangular on plan or polygonal concrete , complete all as specified and directed by Engr-In-charge.

M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and directed by Engr-In-charge.

M & L for Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and directed by Engr-In-charge.

M&L for RCC M25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass, complete all as specified and directed by Engr-In-charge.

M&L for RCC M25 (Design Mix) as in Columns, pillars, piers, posts and struts , complete all as specified and directed by Engr-In-charge.

M&L for RCC M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specified and directed by Engr-In-charge.

M&L for RCC M25 (Design Mix) as in chajja etc , complete all as specified and directed by Engr-In-charge.

M&L for PCC (1:2:4) type B0 using 20 mm graded agg as in coping /bed block etc inclduing necessary form work, complete all as specified and directed by Engr-In-charge.

M&L for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching/padding /moulding on top of chajja junctions etc., complete all as specified and directed by Engr-In-charge.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed by Engr-In-charge.

M&L Rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement , complete all as specified and directed by Engr-In-charge.

M&L for preparing newly plastered surfaces and applying two coats oil bound distemper over a coat of 1mm thick putty over a coat of chlk whiting primer complete on wall as, complete all as specified and directed by Engr-In-charge.

M&L Rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement , complete all as specified and directed by Engr-In-charge.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed by Engr-In-charge.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by Engr-In-charge.

All as per ser item No 23 but exc. 1.5 Sqm but n.exc 4 Sqm each, , complete all as specified and directed by Engr-In-charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed by Engr-In-charge.

S&F factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F powder coated aluminium frame for doors,window,ventilator & Partitions ( fixed portions) with one or more rebates including joining cleat for fixing etc , complete all as specified and directed by Engr-In-charge.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications, complete all as specified and directed by Engr-In-charge. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint (Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading n exc 0.5 sqm each pane , complete all as specified and directed by Engr-In-charge.

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165, complete all as specified and directed by Engr-In-charge.

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters, complete all as specified and directed by Engr-In-charge.

S&F hydraulic door closer of aluminium fixed to door shutters of designation 2 , complete all as specified and directed by Engr-In-charge.

M&L for powder coated aluminium door shutters single/double leaf, side hung type, with top and lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shutter , complete all as specified and directed by Engr-In-charge. (Prelaminated board and glass to be measured & paid separately).

S&F 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc , complete all as specified and directed by Engr-In-charge.

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading exc 0.5 sqm each pane, complete all as specified and directed by Engr-In-charge.

S&F Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type, complete all as specified and directed by Engr-In-charge.

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed , complete all as specified and directed by Engr-In-charge.

S&F in repair Mortice lock, brass body 4 levers, vertical type, size 100 mm, complete all as specified and directed by Engr-In-charge.

S&F in repair 150 mm long aluminium handles, cast type anodised, , complete all as specified and directed by Engr-In-charge.

S&F in repair Butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pins, anodised and fixed, type B-21 , complete all as specified and directed by Engr-In-charge.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-In-charge.

S&F aluminium grill of mesh size 50 mm x 50 mm fixed to aluminum window frame , complete all as specified and directed by Engr-In-charge.

M&L for Anti -termite treatment to the under plinth protection, top surface of filled earth ,bottom and sides of excavation at rate of 5 Ltrs of emulsion per square meter of surface area, complete all as specified and directed by Engr-In-charge.

M&L for ATT to treating the backfill in contact with foundation at the rate of 7.5 Ltrs of emulsion per square meter of vertical surface complete all as specified and directed by Engr-in-charge

Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers, complete all as specified and directed by Engr-In-charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base, complete all as specified and directed by Engr-In-charge.

M & L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement , complete all as specified and directed by Engr-In-charge.

M&L for 38 mm wide and 3mm thick glass dividing strip inserted in postion , complete all as specified and directed by Engr-In-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-In-charge.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) , complete all as specified and directed by Engr-In-charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.Fe 410 -W (Gde-E- 250) quality-A etc , complete all as specified and directed by Engr-In-charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-In-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-In-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding /velly gutter to wall, fixed with self tapping screws, complete all as specified and directed by Engr-In-charge.

M&L for preparation New steel and iron surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer , complete all as specified and directed by Engr-In-charge.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement, complete all as specified and directed by Engr-In-charge.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate), complete all as specified and directed by Engr-In-charge.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 , complete all as specified and directed by Engr-In-charge.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:4 , complete all as specified and directed by Engr-In-charge.

Returning, filling in, including spreding, levelling, watering and well ramming in layers n.exc 25cm, complete all as specified and directed by Engr-In-charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed , complete all as specified and directed by Engr-In-charge.

Providing precast cement concrete type 1:2:4 type B-0 in louvres and jallies 40mm thick , incl all moulding but excluding frame set in cement mortor 1:4, , complete all as specified and directed by Engr-In-charge.

Providing and fixing flase ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225 : 1987, non combustible as per BS 475 (Part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32mm of length 600 mm x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dast fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specificatins, drawing and as per directions of Engr-in-Charge

Disconnecting existing tanks of capacity exc. 250 & n exc. 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position, complete all as specified and directed by Engr-In-charge.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and directed by Engr-In-charge.

Supply and fix Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and directed by Engr-In-charge. Make : Jaquar cat No ARI-39037/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

S&F fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm , complete all as specified and directed by Engr-In-charge. Make : Jaquar Cat No ARI-39001B/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engr-In-charge.

S&F CP Soap dish, complete all as specified and directed by Engr-In-charge.

S & F Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed by Engr-In-charge.

S & F CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved , complete all as specified and directed by Engr-In-charge.

S&F Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms), complete all as specified and directed by Engr-In-charge.

S&F CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs, complete all as specified and directed by Engr-In-charge. Make : Jaquar cat No CAN-1111NM/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&FC P Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engr-In-charge.

S &F corner glass shelf with brass chromium plate bracket guard and railing a, complete all as specified and directed by Engr-In-charge.

Taking up or down, steel tubing 15mm bore, and connection, in cluding cleaning , complete all as specified and directed by Engr-In-charge.

Taking up or down, steel tubing 20mm bore, and connection, in cluding cleaning , complete all as specified and directed by Engr-In-charge.

M & L 15mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc , complete all as specified and directed by Engr-In-charge.

M & L 20 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc, complete all as specified and directed by Engr-In-charge.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm, complete all as specified and directed by Engr-In-charge.

Supply and fix table top vitreous china wash hand basin white of size 650 x 420 x 110mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc , complete all as specified and directed by Engr-In-charge.

S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe, complete all as specified and directed by Engr-In-charge.

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for 110mm dia PVC (SWR) pipes double socketed in any length with rubbing ring joints fixed to walls , complete all as specified and directed by Engr-In-charge.

Supply and fixing of 110mm dia PVC (SWR) bends for any radius , complete all as specified and directed by Engr-In-charge.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement , complete all as specified and directed by Engr-In-charge.

Supply and fixing of 75 mm dia PVC (SWR) bends for any radius , complete all as specified and directed by Engr-In-charge.

S & F in repair 110 mm bore PVC (SWR), junction double, (single T), equal or unequal with access door, complete all as specified and directed by Engr-In-charge.. Make : Finolex, Supreme, Kisan

S & F in repair 75 mm bore PVC (SWR), junction double, (single T), equal or unequal with access door, complete all as specified and directed by Engr-In-charge. Make : Finolex, Supreme, Kisan

S & F PVC (SWR) reducers of 110 mm bore Make : Finolex, Supreme, Kisan, complete all as specified and directed by Engr-In-charge.

S&F 110mm PVC (SWR) branch piece, single Y piece equal or unequal, complete all as specified and directed by Engr-In-charge. Make : Finolex, Supreme, Kisan

S&F 75mm PVC (SWR) branch piece, single Y piece equal or unequal, complete all as specified and directed by Engr-In-charge. Make : Finolex, Supreme, Kisan

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand , complete all as specified and directed by Engr-In-charge.

M & L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in coping, edging concrete incl necessary formwork, weathering, slightly rounded or chamfered angles, complete all as specified and directed by Engr-In-charge.

M&L two coats of cement based paint on new surfaces of wall including preparation of primer, complete all as specified and directed by Engr-In-charge.

M & L mild steel work Fe 410 -W (Gde- E- 250) quality- as in side hung gate,Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed by Engr-In-charge.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody, complete all as specified and directed by Engr-In-charge.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc , complete all as specified and directed by Engr-In-charge.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface, complete all as specified and directed by Engr-In-charge.

Disconnecting and taking down un serviceable light fittings of any description/ capacity , complete all as specified and directed by Engr-In-charge.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly , complete all as specified and directed by Engr-In-charge. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. Make:Havells/polycab/Finolex

All as per srl item No 104 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

All as per srl item No 104 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

All as per Srl item No 104 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate , complete all as specified and directed by Engr-In-charge. Make: Havells/ Legrand/Indoasian Elvira

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block, complete all as specified and directed by Engr In charge. Make: Havells/ Anchor/Indoasian

S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of , complete all as specified and directed by Engr-In-charge. Make:- Havells/ legrand/ Indo Asian.

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. Make - Havells/ Wipro/Syska

S&F in replacement 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engineer-in-Charge. Make - Havells/ Wipro/Syska

Supply and fixing LED luminaire 15 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make- Havells/ Philips/C&S.

S&F Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification , complete all as specified and directed by Engr-In-charge. Make:- Havells/ legrand/ Indo Asian.

S & F replacement MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA, complete all as specified and directed by Engr-In-charge. Make:- Havells/ legrand/ Indo Asian.

S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification , complete all as specified and directed by Engr-In-charge. (Note-MCBs will be measured separately)Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and directed by Engr-In-charge. Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and directed by Engr-In-charge. Make:- Havells/ legrand/ Indo Asian.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.00 Sq mm as earth lead all as specified. Including taking down old sub main wire, complete all as specified and directed by Engr-In-charge.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire, complete all as specified and directed by Engr-In-charge. Make:Havells/polycab/Finolex

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire, complete all as specified and directed by Engr-In-charge. Make:Havells/polycab/Finolex

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc, complete all as specified and directed by Engr-In-charge. Make:Havells/Bajaj/CG

Supply and wall fan , AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection all as specified and direceted by Engr-in-charge. Make:Havells/Bajaj/CG

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection , complete all as specified and directed by Engr-In-charge. Make:Havells/Bajaj/CG

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

S & F in repairs LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LeD lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size , complete all as specified and directed by Engr-In-charge.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp wit construction of foundation , complete all as specified and directed by Engr-In-charge.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size all as specified including taking down old cable, complete all as specified and directed by Engr-In-charge. Note : Earth work and other connected work shall be measured & paid sperately.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 4 Sqmm x 2 core size all as specified including taking down old cable, complete all as specified and directed by Engr-In-charge. Note : Earth work and other connected work shall be measured & paid sperately.

M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating, complete all as specified and directed by Engr-In-charge. Note : for payment purpose punned thickness shall be measured

M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels , complete all as specified and directed by Engr-In-charge.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles , complete all as specified and directed by Engr-In-charge.

Supply & Fix of BLDC ceiling fans complete with accessories,blades, down rods, canopy, shackle assy, and 230 V, AC, 50Hz 1200mm sweep. Min air delivery 210 CFM with service value ≥ 6.00 BEE 5 star rated brushless direct current motor (BLDC) Complete all as specified and direceted by Engr-in-charge. Make- Havells /Orient /electric/ Atomberg/ Crompton.

Supply & Fix of BLDC wall fans complete with accessories, AC Single phase, 50Hz, 230V of Size 400mm sweep blades, frame and louvers Complete all as specified and direceted by Engr-in-charge. Make- Havells/ Orient/ electric/ Atomberg/ Crompton.

Supply of exhaust fan, steel body AC single Phase. 230V of size 225/250/300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Khaitan/Atomberg/Orient/Havells

Supply of exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Khaitan/Atomberg/Orient/Havells

Supply of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Khaitan/Atomberg/Orient/Havells

vmd traders (BID ID -3334844)

ANIL KUMAR SHARMA (BID ID -3335240)

s l sharma and sons (BID ID -3342531)

RAMAN CONSTRUCTION CO (BID ID -3342711)

JOGINDER SINGH (BID ID -3335525)

JINDAL BUILDERS (BID ID -3333254)

M/S Ashok Kumar Jaswal (BID ID -3334991)

M/S ASHOK KUMAR PACHIALA (BID ID -3332673)

PARDEEP SHARMA (BID ID -3342987)