GE(S) BTD 54 OF 20-21 SPECIAL REPAIR TO STATIC WATER TANKS (3 NOS) AT GE ENGR PARK SPECIAL REPAIR TO BLDG NOS T-90 T-141 T-142 T-144 T-145 T-146 AND T-147 OF FD WKSP COY EME PROVN OF COVERED SHED FOR ISOLATED PATHWAY FOR FEVER CLINIC (BLDG NO P-29 8)

Amount

Demolition of unreinforced plain cement concrete of any description & in any position not otherwise specifically provided for and disposal off debris where directed etc complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs / blankets any thickness, including frames ( if any) and cover fillets/Iron tee grid frame work etc complete all as specified and directed.( measured flat and not girthed)

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling framed timber scantlings in any position in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

Dismantling of AC corrugated or semi corrugated sheets as in roof including ridges complete all as specified and directed.

Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.5 Sqm each as doors,windows & ventilators etc. complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks before use.

S&F for steel windows/ventilators with side hung shutters including Box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed.

All as per item No. 14 here-in-before but without glazing bars

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane fixed to steel or wooden window frames complete all as specified and directed.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

S & F pressed steel frames of size 105x60mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., (thickness of steel sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkhats and for fixing hold fasts etc., complete all as specified and directed.

S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed.

Supply and fixing 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fixing 200mm long mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and directed

Supply and fixing 150 mm long, mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and as directed

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M& L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other than fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for applying three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

Material and labour for applying two coats of white wash on old plastered wall surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including cement screed bed 20mm in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone 18-20 mm thick in riser/ treads (in Single piese), skirting, dado and pillar over 10mm thick rendering in CM 1:4 laid in jointed with grey cement slurry mixed with pigment to match ther shade of slab including rubbing, grinding and polishing mirror finish complete all as specified & directed.

M&L 25mm thick cement concrete 1:2:4 type B-0, (using 12.5 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:4 complete all as specified and directed .

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces such as skirtings set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Blank

Blank

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeeding 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

Material and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and dia of shank 12mm complete all as specified and directed.

Supply and fixing 600x600x4mm thick 'E' board class ie as in false ceiling including supply and fixing 'Tee' grid frame workmade of special section of MS galvanised sheet 0.3mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastner or wraping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work of size 600mmx600mm suspended with 2 Nos, 1.60mm dia GI wire@600mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main tee 37mmx24mmx0.60mm thick, cross runner tee 37mmx24mmx0.6mm and perimeter angle 24mmx24mmx0,5mm thick shall be fixed to wall with GI screw of 40mm long@450mm c/c along the perimeter of wall including or all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, handles of manhole cover slabs, rungs of man holes, straps and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Supply and fixing plates plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 -W (Gde-E- 250) quality-A complete complete all as specified and as directed

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Pumping out water from the static water from the static water tank of any capacity and removal of water mud from the base of SWT including cleaning with clean water complete and disposed off soild material up to 50 mtrs as directed by Engineer-in-Charge.

Use and waste of formwork to well steining and well curbs circular on plan for rough finished surfaces of concrete complete all as specifed and directed.

Use and waste of formwork to well steining and well curbs square or rectangular on plan for rough finished surfaces of concrete complete all as specifed and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

All as per item No 54 here in before but 6 o 8mm dia complete all as specified and as directed.

All as per item No 54 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed.

Material and labour for RCC M-30 (design mix) using 20 mm graded stone aggregates as in beams/bands on static tank wall and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.)

Material and labour for RCC M-30 (design mix) using 20 mm graded stone aggregates as in static tank wall and retaining wall basement walls, ballast wall and the like any thickess above top of footing including attached plsters and butresses complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.)

M& L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including mixing of WPC as per manufactures instructions as in wall complete all as specified and directed. Note:- WPC shall be measured & paid separately under separate item of BOQ.

Supply only liquid water proofing compound as per manufacturer specifications complete all as specified and directed.

M&L PCC 1:5:10 type E-2 using 40mm graded crushed stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc.including finishing the surfce of concrete topping layer even & rough complete all as specified and directed.

M & L for 100mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate as in hard standing plinth complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil & getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering,and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed.

All as per item No. 64 here-in-before but depth exceeding 1.5 m and not exceeding 3.0 m

Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. complete all as specified and as directed.

Material and labour for cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, paths & paving etc complete all as specified and as directed.

Material and labour for cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, paths & paving etc complete all as specified and as directed.

Material and labour for brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc including proper compaction using mechanical vibrator complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in slabs supported on walls, beams, bands and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in chajjas complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed.

Material and Labour for formwork to sides and soffits of floor or roof beams, bands, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface of concrete complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10cm but not exceeding 20cm wide complete all as specified and as directed.

Material and Labour for formwork to rough finished surface of concrete edges of concrete as in chajjas including edges complete all as specified and as directed.

Blank

Material and Labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and Labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded crushed stone aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.

Material and Labour glazed ceramic coloured joint free tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/450mm x 350 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Blank

S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.2.8 of SSR Part -II (2010) and all as shown on drawing on Sl Page No 160 of SSR Part-II (2010) complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156.

S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 150 mm long, cast type, (ISI marked) complete all as specified and as directed .

Supply and fixing Vitreous china wash hand basin counter fitting type in new position, white, flat back, fancy type, size 550 x 400 mm including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed .

Supply and fixing 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supplu only PTMT waste coupling 32mm dia complete all as specified and directed.

S&F vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap, in and including water closet seat cover of plastic , jet spray etc. complete including necessary PVC pipe fitting to make the seat fully functional complete all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed .

S & F vitreous china urinal, half stall type, white excluding flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and directed .

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed .

S & F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed .

Supply and fixing three layers 500 liter HDPE water storage tanks polyproof, white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed.

Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

S & F PVC connection 15 mm size with brass nuts on both ends and washers length 600mm of approved quality complete all as specified and directed.

Supply and fixing tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed.

Supply and fixing Chromium plated, soap dish fixed to wall with screwes including plastic gutties complete all as specified and directed .

S & F 15mm bore fancy type chromium plated brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Blank

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .

Supply and fixing 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fixing chromium plated angle valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed .

Supply and fixing stop valve for 20 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed .

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specifed and directed.

Supply and fixing 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specifed and directed.

Supply and fixing 75 mm bore PVC (SWR) bend/tee any type complete all as specifed and directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl any type complete all as specifed and directed.

Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.

Material and labour for Salt-glazed stoneware gully traps of size 150x150mm, square or round mouthed, type 'S' including squre chromium plated 150 mm dia grating complete all as specified and as directed by Engineer-in-Charge.

S & F 75mm bore cast iron sand soil waste and vent pipe with or without ears fixed with cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F 100mm bore cast iron sand soil waste and vent pipe with or without ears fixed with cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S & F 100mm bore bends CI pipe with duct's foot or heel rest including oval access door complete all as specified and directed.

S & F 75mm dia PVC (SWR) branch piece, single equal or unequal complete all as specified and directed.

S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

Material and Labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in coping, kerb stone, manhole covers, kitchen sink slab etc with plain fair faces including chamfers, atherings,throating etc. and setting in mortar set in cement mortar (1:4) including necessary form work complete all as specified and as directed.

Cutting into existing manholes / septic tank for connecting new drains of size 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Salt-glazed stoneware drain pipes 150mm bore of grade 'A' laid in trenches and jointed etc. complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW) drain pipes of 150 mm dia plus 20cm on both sides , laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets / collar)

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engineer-in-Charge.

Blank

Blank

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and Labour for 60mm thick machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of M-35 grade with grey cement & pigment no over and including 25mm thick sand complete all as specified and directed .

Material and Labour for 25mm thick sand filling under interlocking tiles including watering and consolidation complete all as specified.

Material and Labour for continuous brick edging with burnt clay of subclass brick 'B' of old size 75mm wide with brick laid dry on end vertically including excavation complete all as specified and as directed.

M & L for appling a coat of cold bituminous primer over cleaned plastered surface @ 0.40 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by any manufacturer as per list of make in tender documents approved by GE, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and directed.

M & L for lime concrete with 40 mm graded with brick aggregate laid to slope/level in lime mortar ration 1:3 complete all as specified and directed.

Material and labour for cement concrete tiles with grey cement and pigments, 25cm x 25cm x20 to 22 mm thick coloured & design as approved, set, jointed and pointed in neat cement slurry as in floors etc; laid over & including 15mm thick screed in CM (1:6) complete all as specified and as directed

M & L for making benching with PCC 1:2:4 type B0 along side wall adjoining to roof in concave shape complete all as specified and as directed

Supply and fixing powder coated aluminium frame having minimum thickness of powder coating 50 micron for ventilators including provision of necessay rubber gasket for fixing glass panes etc complete all as shown in drawing No. CEBT/SK-936 sheet 1/1 complete all as specified and directed .

S & F solid FRP door frame of size 90mm x 45mm with single rebate of 32m x 15mm to receive shutter moulded with fire retardent grade and saturated polyster resin and choped mat door framed shall be 2mm thick and fill with suitable block in all the three legs. The frame shall be covered with fiber glass rom all side MS stay shal be provided at the bottom to steady the frame as per specification shown on drawings.

S & F for factory made solid panel FRP door shutter shall be 30mm thick (style) glass fibre reinforced plastic panel door shutter of required colour with fire retardent grade and saturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable block of seasoned wood inside at reqd places for fixing of fittings cast monolithically with 5mm thick FRP panel and conforming to IS 14856:2000. Supplying and fixing in the frame at site as per specification shown on drawing.

Providing and fixing SFRC (Steel Fibre Reinforced Concrete) Cover and frame (heavy duty HD-20 grade designation) internal size 590x590mm & External size of frame 800x800x100mm including manhole cover having size 590x590x50mm thick and fixed over earthing manhole after demolition of PCC coping & manhole cover & set in CM 1:4 including benching in PCC 1:2:4 and finishing smooth complete all as specified and directed.

S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for 18mm thick Granite jet black shade machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement in CM(1:4) with admixture of pigment to match the shade of granite stone including grinding and polishing complete over as in steps, jambs, pillars, window cills, cooking plateforms, basin top etc and including 10 mm thick screed bed in CM 1:4 complete all as specified and as directed . Note :- The sample will be approved by GE before bulk procurement. Tenderers are advised to ascertain the same before quoting their rate.

S & F sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing on plateform and connecting union to pipe overall size 495mm x420mm bowl size 410mm x330mm x160mm complete all as specified

Supply and fixed PTMT grating doom of size 125 mm with or without waste hole (Minimum wt 40 grms)complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete with all accessories such as switches, switch-sockets, pendent, holders, regulators, light fittings ceiling roses, etc and removing dismantled material including making good the disturbed surface of walls, floors, ceilings etc to match with existing surface complete all as specified and directed .

Material and Labour for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium quality ISI marked) and conduit fittings and MS sunken box of suitable size covered with and including 3 mm thick bakelite laminated sheet top cover for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chasing of wall and making good disturbed surface in CM (1:3) and finishig the surface to match complete all as specified and directed .Note:- ( Switch and socket etc shall be measured and paid separately under approriate items of BOQ).

All as per item No 153 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified and directed.

All as per item No 153 here in before but for socket outlet 3 pin, 5 Amp on independent board complete all as specified and directed.

All as per item No 153 here in before but for one socket outlet 6 pin, 6/16 Amp with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sq mm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly complete all as specified and directed .

S& F switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked )one way etc complete all as specified and directed by Engineer-in-charge.

S&F one socket outlet 5 Pin 5/6 Amp 230 volts AC complete all as specified and directed by Engineer-in-charge. Note:- Switch and socket shall be of same make.

S&F one socket outlet multipurpose, 2-in-1, 3 Pin, 5 and 15 Amp 230 volts flush type complete all as specified and directed by Engineer-in-charge. Note:- Switch and socket shall be of same make.

S& F switch piano flush type, 15 Amp 240 Volt, AC one way etc complete all as specified and directed.

Supply and fixing regulator for ceiling fan electronic step type suitable for 1200/1400 ceiling fan including hylam sheet of suitable size as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed .

Supply and fixing lamp holder angle/straight, including LED bulb 9W, 6500K, base B-22 polycarbonate cased body with back plate suitable for batten fittings for landing T & wind shock complete all as specified and as directed .

Supply and fixing 9 Watt LED lamp, 6500K, base B-22 efficacy not less than 90 lumen/watt complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed .

Supply and fixing in repair MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed .

Supply and fixing MCB, SPN, 32-40 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing in repair MCB, SPN, 32-40 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing in repair MCB, TPN, 40-63 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 4 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing in repair sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing in repair sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 4 way, DB TPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed.

S & F LED light fitting 1x40 watts New generation energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP66 protection and impact resistance of IK07 inclusive of making provision of suitable size GI bracket of 40mm dia ( 01 No) and MS clamps ( 02 Nos) fixed to wall/column including electrica connection providing 1.5 mtr long twin core round copper conductor cable ( covered with flexible conduit) of suitable size including taking out old unserviceable fitting complete all as specified and as directed .

S & F recessed mounting 2' x 2' LED luminaire 36 Watt with white powder coated CRCA sheet housing comprising of LEDs connected in series parallel, colour temperature cool white 6500 K, opal diffuser, constant current output drier, operating range 150-265 volts AC singl phase including taking down old unserviceable fitting complete all as specified and directed.

Supply and fixing single phase, 50 hz, 240 volt exhaust fan of size 300 mm sweep, 1400 rpm, air delivery 1300 CMH (metal body) including making connection and providing 3 core copper conductor cable of suitable size complete all as specified and as directed .

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10sqmm 2 core complete all as specified and as directed .

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6sqmm 2 core complete all as specified and as directed .

Supply and fixing in repair rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as plers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed

Material and Labour for sub main wiring with 2 single core cable of size 6 sqmm, 1100 votls grade PVC insulated unsheathed of copper multi strandard conductor FRLSH cable including PVC insulated 6 sqmm unsheathed multistranded FRLSH copper conductor cable for earth continuity, drawing through in & including PVC concealed conduit medium grade of size 20mm along with accessories such as Tee, elbow, bend etc including cutting chasing of wall if required and making good the disturbed surface in CM (1:3) and finishing the surface to match with existing surface etc including taking down old unserviceable sub main wiring of any type and size complete all as specified and as directed . Note :- Three runs of cable nd one run of conduit along with accessories shall be measured as one unit.

S&F wall mounted extruded Aluminium/polycarbonate LED batten fixture T8 (G13 holder) 1.2m including one LED retrofit tube 20 watt, 1.2m T8 6500K, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete including making connection. The system wattage of itting should not be more than 20 watt +10%, surge protection of minimum 3.5 KV, power factor should be not less than 0.95 cool white colour, total harmonic distoration (THD) shoud be less than 20%, lumen output should not be less than 2000 lumens, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, colour temperature 6000 K complete all as specified and directed. Make of LED tube:- Havells Maxoled(tube) of cat part No LHLDDCXCML8Q020 of Havells or Glaze tube of Surya or equivalent make of crompton/philips. Make of batten:- Maxoled batten of Cat Part No LHFXCENNTN1W020 of Havells or Glaze batten of surya or equivalent make of crompton/philips

S&F in repair wall mounted extruded Aluminium/polycarbonate LED batten fixture T8 (G13 holder) 1.2m including one LED retrofit tube 20 watt, 1.2m T8 6500K, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete including making connection. The system wattage of itting should not be more than 20 watt +10%, surge protection of minimum 3.5 KV, power factor should be not less than 0.95 cool white colour, total harmonic distoration (THD) shoud be less than 20%, lumen output should not be less than 2000 lumens, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, colour temperature 6000 K complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (PCC 1:2:4 B-1 using 20 mm graded stone aggregates for concrete pit including 10 mm thick CI cover frame) depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point, all as specified as shown in electrical plate No 3 SSR Part-I and testing on completion complete all as specified and as directed . Note :- PCC chamber shall be constructed at least 1.5 m away from earth pit pipe for watering shall be provided in slanting manner.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (PCC 1:2:4 B-1 using 20 mm graded stone aggregates for concrete pit including 10 mm thick CI cover frame) depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point, all as specified as shown in electrical plate No 3 SSR Part-I and testing on completion including taking down old existing earthing of any type complete all as specified and as directed . Note :- PCC chamber shall be constructed at least 1.5 m away from earth pit pipe for watering shall be provided in slanting manner.

Note:- Net contract sum shall be calculated after deduction of Sch of credit of Rs. 39703.00.

M/s Balvinder Singh Engineer and Contractors