REPAIR/MAINT OF B/R COMPLAINTS NATURE OF WORKS IN PCDA(A) COMPLEX UNDER GE AF JAMMU

Amount

M&L attending the complaints of AGE B/R regarding water leakage from taps, flushing cisterns, wash hand basins overhead tank over flow and other sanitary fittings/fixtures and any obstruction to water supply, requiring work and carryout minor repairs such as replacement of washers, check nuts, tightening the fittings of flushing cistern etc including small materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply lines functional and removing leakage fault complete all as specified and directed by Engineer-in-Charge. Note : Any items required to be replaced shall be paid under respective items. .

M&L for carpenter work any type wooden/steel /aluminum (doors windows & shutters) in repair will be as under shutters of lock side rail and hinge side rails and reassembling shutters with old retrieved members carefully such as wooden panel/prelaminated board,glass or wire mesh which are required in same situations and making the doors/widows tightening / screwing /welding including refixing of old like this hinge, tower bolt, mortice lock, bolts, handle, door stoppers, hydraulic door closer, and and refixing shutters in same opening after assuring complete alignment etc, complete all as specified and directed.

Note : (i) All the complaint(s) received will be lodged & rectified by the contractor rep and will have to maintain a proper record as directed in complain register and in complain slip. (ii) If Contractor fails to rectify the complaints with materials / items to be replaced if required a penalty 200Rs/Complaints of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints with in 48 hrs. In the delayed case of a rectification of complaints even after 48 hrs he shall rectify the same within one week. (iii) Attending the complaints of AGE B/R like fixing screws to tower bolt/ stoppers Handle Hinges in respect or Easening of Easening of (Steel/wooden /Aluminium) Door/Windows lor any description and size by cleaning adjusting in position and making the same functional incl small repairs if reqd with and incl greasing , oiling , screws/nails for fixing the fittings (Note -The complaint recieved from complaint cell shall have to be attended or same day). (vi) Any Misc items reqd viz. MSeal, screws, washers, nails etc in the work should be deemed incl in the respective items of repair and nothing extra shall be paid on the account.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling timber scantlings in framed work , fillets rail post rafter in any postion under 40sq.cm in section completeall as specified.

Taking down wooden shutter of any dscription exc 1.00 Square metre but n.exc 2.00 Square metre , each (with all fittings) complete all as specified and directed.

Taking down shutter of any description n.exc 1 Sqm each & removing from site of work complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n-exc 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames (without taking off shutter from shutter ) area exc 1.50 sbut n exc 4 Sqm quare metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge.

Hacking out old broken glass of bldg height 4th storey (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegetation upto and including roots upto 30mtrs hight form ground complete all as specified and directed. Note: This included any thick of plaster and already of tiles or mosaic tiles etc & work shall be executed up to 4th storey bldge

Taking up or down steel tubing for 15mm dia pipe and connections including cleaning up to 4th storey for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

Dismantling 1000 ltr water tanks and removing to store complete all as specified.

Dismantling 500 ltr water tanks and removing to store complete all as specified.

S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes,complete all as specified and as directed by Engr-in-Charge.

M & L for cement concrete (1:4:8) type D-2 (40mm graded stone aggregate) in foundations/sub floor Complete all as specifed and directed by Engr-In-Charge.

M/L Cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in roof kerbs or mud stops, kurb ston coping cill smalar bends Plint course , rounded or chamfered on edge including necessary form work complete.

M/L 75mm thick, Cement concrete 1:3:6 type C2 using 40mm graded stone crushed aggregate in plinth protection, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

M&L 20 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shede complete all as per specified and as directed. Note : Including making of hole and other work as per directon by Engr in Charge whichc is required.

M&L chequered cement concrete coloured tiles machine pressed conforming to IS 13801:1993 and ISI marked, size not less than 300mm x 300mm (Approx), thickness 25mm, as in floor, paving set and jointed in neat cement to match with gray pigment all as specified and directed.

M&L 25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L15 mm thick screed bed or bedding layer in CM 1:4 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles lcomplete all as specfied and directed.

M&L for colored non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.11 Square metre but n exc 0.18 Square metre in floors etc set and jointed in neat cement slurry and pointed in colored complete all as specified and directed.

M & L Glazed ceramic tiles coloured (350x250x7mm/ 450x350x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified.

M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified.

M&L for plywood 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screws to timber frame-work to timber frame work in wall portion. All as specified and directed by Engr-in-charge, complete.

M & L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25 sqcm secured with nails complete

M & L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area n-exc 3 Sqcm secured with nails complete

Continuous (piano) hinges width of flaps 40 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F for magnetic catcher with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

Taking down wooden shutter of any dscription n.exc 1.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specified and directed.

Taking down wooden shutter of any dscription exc 1.00 Square metre but n. exc 2.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specifed & directed.

S&F In repair pressed steel doors frames of size 105x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc,complete,as specified and directed by engr in charge.

S&F In repair pressed steel doors frames of size 125x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc,complete,as specified and directed by engr in charge.

S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge.

S&F flush shutters, solid core construction 30mm with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S/F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S/F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F godrej Stainless steel slip (door mount) on soft closeing concealedhing for cabinate door smooth operating hinges for full overlay door & window fixed as per manufucture instruction complete all as specified and directed.

S&F Stainless steel alloy Butt hinges 125 mm long, ISI Marked, anodised, with galvanised mild steel hinge pin complete all as specified and directed.

S&F for Stainless steel Butt hinges 100 mm long, ISI Marked, anodised, with galvanised mild steel hinge pin fixed in repair, complete all as specified and directed.

S&F for Stainless steel, sliding door bolt, ISI Marked, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for Stainless steel, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed.

S&F for Stainless steel handle, ISI Marked, of extruded section 100 mm long fixed with screws complete all as specified and directed.

S&F for Stainless steel handle, ISI Marked, of extruded section 150 mm long fixed with screws complete all as specified and directed.

S&F for Aluminiun anodised barrel tower bolts, ISI Marked, of extruded section of size 100mm fixed in repair complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, fixed in repairs complete all as specified and directed.

S&F for Aluminium anodised handle, ISI Marked, of extruded section 100 mm long fixed with screws fixed in repair complete all as specified and directed.

S&F for Extruded aluminum alloy handle, ISI Marked, fabricated type, anodized 125mm size, fixed in repairs complete all as specified and directed.

S&F for Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete all as specified and directed.

S&F rubber door seal 32mm wide and 1.5mm thick strip of mild steel with hard brush fixed with machine steel screw with washer in door bottom fixed in repair complete all as specified and directed.

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding or scruwing on wooden or steel frames complete all as specified and as directed

Repair & refixing in same position of aluminium anodised door shutters of any description, size exceeding 1.50 Sqm but not exceeding 4.00 Square Metre by taking down/without taking off shutters from the frame, disconnecting carefully shutter member with deligated tools and as per manufacture's instructions. Removing broken aluminium mongeries, tilted/deformed aluminium beads, teared T rubber gasket and cleats in hollow blocks of rails and retightening in same position with excessess sectional area steel screws incl tightening mild steel rod with nuts in hollow blocks of members of shutters of lock side rail and hinge side rails and reassembling shutter with old retrieved members carefully such as ACP panel/prelaminated board, tinted glass 5.5 mm thick in same situations and securing both side with supply and fixing new rubber T gasket and aluminium beads to making the door air tight including refixing of old aluminum hinge, tower bolt, mortice lock, bolts, handle, door stoppers, hydraulic door closer and refixing shutters in same opening after assuring complete alignment etc. Repairing floor spring where provided including making good alignments. Also adjusting door chowkats and frame and refixing with new rowl plugs & 3 to 4" long standard steel flat headed screws and assuring the strength of chowkats/frames before refixing shutters etc complete all as specified and directed.

S&F Anodised aluminium frame and shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repair powder coated to minimum thickness of powder coating 50 micron of aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete in all respect as per manufacturer's instruction and including making good disturbed surfaces complete all as specified and directed by Engineer-In-Charge.

S&F in repair Powder coated/anodised aluminum American handle cast type 200mm for doors all as spfd...

S&F repair Powder coated/anodised aluminum handle cast type 100mm collapsible type all as spfd...

S&F Powder coated/anodised 75mm size butt hinges , extruded aluminum alloy ISI marked all as spfd..

S&F Neoprene/ EPDM rubber gasket for fixing sheet glass complete all as specified.

S&F Zinc alloy rollers for UPVC/Aluminium windows all as specified.

S&FAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F aluminum alloy wire cloth , 0.45 mm nominal dia of wire and avg width of aperture 1.40mm and fixed with aluminum stapples all as spfd..

S&F brass mortice lock four levers (Harrisons) vetrical type size 100mm or above as directed by Eng-in -charge.

S&F in Aluminium Composite Panel of any colour of having thickness of approx 3-4mm thick which are used in aluminium doors/partitions of all as specified and as directed.

S&F for 5.50mm thick tinted sheet glass or frosted glass whicj will be required ordinary quality and glazing with oil putty/ wooden beads with nails in square exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed in repair including taking down carefully aluminium door without demaging any member/part and re-fixing the the same including easing complete all as specified and directed.

S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

S&F in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F for magnetic catcher with steel body ‘H’ type, fixed to shutter, fixed in repairs, complete all as specified and directed.

Supply and Fixing brass mortice lock four levers vertical type size 100mm or above fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F in repair Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.

S&F for stainless steel rounded block made in round shape and cromium coated which will be match suitable for curtain rod 25mm dia fixed in repair complete all as specified and as directed.

S&F Stainless steel brackets set curtain inials with fitting accessories curtain rod holder set for doors & windows made in shape and size to hold certain rods and size of bracket 150mm for curatin rod of 25mm complete all as spd and directed by engr-in-charge.

S&F for 4.00mm thick sheet glass or figured type ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

M&L Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

Excepet Bricks work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces, other than fair face (without using extra cement) on walls in cement mortar 1:4 including WPC complete all as specified and directed by Engr-in-charge. Note: Supply only liquid water proofing admixture shall be measured and paid seperately

Supply only Liquid Water Proofing admixture complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks capacity of tanks any capacity litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge. Note ; After Cleaning the tank the date will be written on it.

S&F in repairs PVC water tank cover for 1000 Litre and 500 Litre capacity including proper fixing with clamp &nut bolt complete all as specified.

M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

Re fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

M&L for 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and dirceted.

Re fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and dirceted.

S&F for GI Nipple of 15/20mm, 50mm,100mm,150mm length complete, fixed in repairs, all as specified and dirceted.

S&F for GI sockets, Elbo,Reducer Ttee Union of 15mm dia fixed in repairs complete all as specified and dirceted.

S&F for GI sockets, Elbo,Reducer Ttee Union of 20mm dia fixed in repairs complete all as specified and dirceted.

S&F in repair brass spindle complete for 15mm dia bib tap complete all as specifed and directed.

Supply and fixing in repair brass spindle complete for 15mm size stop cock complete all as specifed and directed.

Supply and fixing in repair brass spindle complete for 20 mm size stop cock complete all as specifed and directed.

S&F 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Stop valve/cock Gate Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and dirceted.

S&F Stop valve/cock,Fancy Type ISI Marked, cast copper alloy, screwed down, high pressure with handle, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F in repairs 15mm dia bib tap ISI Marked, cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified and dirceted.

S&F in repairs 15mm dia bib tap fancy type( Long Nose) ISI Marked, cast copper alloy chromium plated with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified and dirceted.

S&F 15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore pillar tap fancy type (Swan nake) cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass Chromium plated Basin Mixer (15mm)valve hot and cold screwed down for iron pipe complete .

S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . Make Jaquwar ,Cera only

Brass Chromium plated over head shower rose with swivel joints, any size, including 190mm long arm fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, including brass CP jet nozzle with 900mm long PVC pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F in reapired vitreous china wash down water closet pan ( pedestal pattern ) size 670x 390x760mm snow white complete including ‘P’ or ‘S’ trap , seat cover and flushing cistern, brackets, flushing pipe etc complete all as specified. Cera clair cat no S1031102, cat no S1060102, B1510108, cat no B1810105 ).

S&F 110mm bore Cast Iron (SWR) 'P' or 'S' trap, including fixed with solvent cement complete all as specified and directed.

S&F in repair plastic seat cover coloured suitable for water closet pedestal pan, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges devices complete all as specified and directed.

Supply & fixing in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F in repairs Health faucet (ABS body) mild steel chrpmium plated sutaible for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS Wall hook including making connections and fixed in position complete all as specified and directed by Engr-in- charge

Supply and fixing PVC low density waste pipe 32mm bore of standard length with cup and washers for urinal/WHB, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing PVC low density waste pipe 40mm bore of standard length with cup and washers for kitchen sinks, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

S & F, Vitreous China bowl urinal Full stall type (355x340x535 mm) white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Stainless steel sink, with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and as directed.

Waste coupling of PTMT (half or full threaded), 32mm bore dia of discharge pipe (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F for Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc fixed in repairs complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

S& F PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

S&F in repair Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed

S&F in repair Corner frosted Glass Shelf (with ABS Brackets) 31.5 x 22.86x5mm as approved by Engr-in-Charge

S&F in repairs CP grating 100mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge

S&F for repairs CP central hole grating 100mm dia as suitable to existing trap as per requirement complete all as specified and directed.

Preparing plastered of unplastered surfaces of old decorated walls/roof and applying one coat of bitumenous primer paint complete all as specified and as directed by Engineer-in-Charge.

M & L for prepration of new plastered surfaces and applying three coat of lime white wash on walls, all as specified.

Preparation of newly plastered surfaces two Coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a complete all as specified and directed by Engr-in-charge.

Preparation of newly plastered surfaces two Coats overFinishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specifiedand directed by Engg-in Charge.

M&L for preparation of new decorated wooden surfaces over a coat pink primer over two coats of synthick enamil paint of any description, not otherwise described over 10 cm width or girth Complete all as specified and as directed.

M & L with Tools grubbing up tree trunk including roots portion from wall /roof filling holes with PCC and making the surface finished with Cement plaster CM 1:3 upto 4th storey of Bldg match with existing colour complete all as specified and directed.

M&L for removal of vegitation / trees grith exc 30cm n. exc 100cm from wall, roof top and CI/PVC sewer lines on wall upto height of 4th storey bldgs incl waste materials removing from site upto the distance of 100m and area of removal places filling with PCC/CM 1:2:4/ 1:4 as site required,complete all as specified and direted by Engineer in charge. Note:- Contractor arrange his own suitable T&P as per site requirement and nothing extra shall be paid for the said work. PCC & CM 1:4 if any required will be measured and paid separately.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints in trenches bore of pipe 110 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints trenches bore of pipe 75 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings.

S & F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints fixed to walls

S & F PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern of roof coverings, complete all as specified and directed.

S&F Pre painted aluminium zinc corrugated steel sheet(galvalume base) of thickness 0.50mm in colour and profile having tensile strength of 550Mpa as approved by AGE and to be factory moulded and fixed with hot dipped galvanised with high durable protective triple coated self tapping screws/self drilling screws, to suit the roofing in customized colour matching with the colour of roof covering/cladding to wall and screws are to be fixed using Torque adjustable electronic gun screws driller of suitable capacity all as specified

Dismantling wrought iron or mild steel work,frame work such as truss, wind tie, angle frame work ,Grill Grating etc of any description complete all as specified and as directed.

S&F framed work any shape nad any designed required by user such as grills, gratings, etc.. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L for making good the broken surface of chajja /facia/roof projection and the simalr work by providing PCC 1:2:4 type B-0 using crused stone aggregate, or providing 15mm thick cement plaster in CM 1:3 as per site Requirment as patchesand including necessary formwork scafolding required hight of building n-exc 9.50mtr complete all as specified and directed by E-in-Charge.

S & F in repairs stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp up to 4th storey all as spd and directed by Engg-in-Charge

Complete removal of exisiting treatment on one cote of Acrylic Smooth exterior paint @ .835 ltr/10 sq of required shade over one coat of primer m complete all as specifiedand directed by Engg-in Charge.

M & L with Tools grubbing up tree trunk including roots portion from wall /roof filling holes with PCC and making the surface finished with Cement plaster CM 1:3 upto 4th storey of Bldg complete all as specified and directed.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge.

M/S CHOUDHARY TRADERS (BID ID -3319699)

M/s Sunny Gupta (BID ID -3319439)

CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3320007)