GEAFU-13/2025-26

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and as directed.

Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.

Demolition of Brick/ stone / boulder masonry built in cement morter complete all as specified and directed .

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level ) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description fixed in any position not otherwise provided for complete all as specified and as directed .

Taking down shutters of any description n.exc 1sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 2.00 sqm each complete all as specified and as directed.

S & F plain, black, mild steel sheeting 1.00 mm thick as in duct and straight flashing (length and girth as fixed) complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or remove from site complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or remove from site complete all as specified and as directed.

Material and labour for APP based polymeric water proofing membrane ,five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid including applying evenly a tack coat of industrial bitumen 85/25 at the rate of 0.30 ltr per Sqm including cleaning surfaces by forced application complete all as specified and directed. Note : The rate quoted shall be deemed to include for dismantling and refixing in position of wind tie and lightening protection after carrying out the treatment and height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required).

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook at height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required) complete all as specified and directed.

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screw or L type or J type hook at height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required) complete all as specified and directed.

S & F Galvanised, corrugated mild steel sheeting 0.63 mm thick, any description with two corrugation side lap, fixed with L/J type hooks/bolts and washers, in roofs, walls at height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required) complete all as specified and directed.

All as pe ser Item No 17 above but except sheet complete all as specified and directed.

S & F 0.80 mm thick plain galvanized PGI sheets in ridges, hips ,vally gutters, etc class 8 ,at height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required) complete all as specified and directed.

Material and labour for closing bolt holes etc. in old corrugated steel sheets or aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm GI bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length at height upto 15.00 mtr from average ground level for all types of building/stucture (including scaffolding if required) complete all as specified and directed.

Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) complete all as specified and as directed .

Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed .

S & F steel rolling shutters 1.25mm thk of laths gear operated type of opening area n.exc 30.00 sqm each with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and , erected in position as indicated complete all as specifeid and as directed.

Supply & Fix suspended false ceiling system using suspended ceiling grid system with the size of grid as 600mm x 600mm with GI frame work, main runner 38 x 24mm, cross tee 38 x 24mm and wall angle 22.20mm x 22.20mm using 8mm thick Gypsum board tiles with PVC vinyl face on one side and aluminium foil backing on other side. The suspended ceiling system grid system shall be duly suspended by 4mm dia GI bar hangers from the purlins/ RCC roof with butterfly clips complete all as specified and as directed.

S & F wall panelling on existing wall surface made out of PVC hollow profile section of size 150mm x 10mm with a wall thickness of 1mm (+/-) 0.2mm to be fixed on wall by self tapping scew of size 19mm x 6mm after puttin rawal plugs.The edge and periphery finaly to be covered by extruded PVC corner angles beading section of size 28mm x 12mm with wall thickness of 1mm complete all as specified and as directed.

Supply and fix rolled mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed .

M&L for preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

Material and labour for brickwork with subclass designation 75 , old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed.

Material and Labour for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate ) as in coping including necessary formwork complete all as specified and as directed .

M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and fair with water proofing compound complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under the respective item.

Supply only water proofing compound

M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coat of oil bound distemper over a coat of primer including applying 3 mm thick wall care putty on new plastered surfaces of walls in any tint and shade, complete all as specified as approved by the Engr-in-charge. (Note : Contractor shall not be any claim for colour / shade dark or light what so ever is required at site.)

Material and labour for applying one coat of white wash on old plastered surface of wall including preperation complete all as specified and as directed .

M&L for two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls and the like etc including preparation of new plastered surfaces complete all as specified and directed.

M&L 40 mm th PCC 1:2:4 type B1 using 20 mm graded aggregate as in flooring, finished fair and even complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base of the floor complete all as specified and directed.

Material and labour for 20-25 mm thick machine cut kota stone flooring laid over 20 mm thick over screed bed with CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Supply fix laminated wooden flooring of size 1214mm x 193mm x 8.00mm thick type AC-3 and fixing by using a coat of approved adhesive not less than 1.32 kg/sqm by weight over 2mm thick foam over existing surface complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C1( using 20 mm graded stone aggregate ) as in flooring / plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and fair complete all as specified and as directed.

S&F Factory made 2nd class hardwood plain framed panelled shutters 35mm thick (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board med density/wood particle board with commercial face veneers fixed to chowkats complete all as specified and as directed.

M&L Coloured glazed ceramic tiles glossy finish of size 300x450x7mm thick in dado’s/skirting etc. lais over 15 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles complete and all as specified and directed.

M&L for Non skid, coloured ceramic tiles of area exc 0.06 sqm and n.exc 0.11 sqm each tile , 7-8 mm thick of any colour pattern in floor laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed.

M&L 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over 15mm thick screed bed or bedding layer in cement mortar1:4 as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent cement,supply and fixing in the frame at site complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts extruded section of 100 mm, long complete all as specified .

S & F aluminium anodised barrel tower bolts extruded section of 150 mm, long complete all as specified .

S & F aluminium anodised handles fabricated type extruded section of 150 mm, long complete all as specified .

S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified .

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M & L steel window (box type) one side glazed and one side skelton factory made one side glazed and one side skelton with side hung shutters including pintle hinge, steel handle, steel peg stay,MS grill and all locking arrangement complete with glazing bars devetailed or welded, complete all as specified and as directed. Note :- Glazing shall be measured and paid separately

M & L for Second class hardwood glazed and skelton shutters 30mm thick, as in windows, open rebated and prepared to receive glass, gauze etc. divided into squares, with edges of framing plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(b) and fitted to chowkats, complete all as specified and as directed.

Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed with steel frame work complete all as specified and directed .

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F of 15mm bore GI tubes medium grade with all fittings and fixed complete to walls complete all as specified and directed

All as per item No 57 above here in before but 20mm bore all as specified and directed

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with, front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning complete all as specified and as directed.

S&Fin repair basin mixer central hole without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed.

M&L in repairs 32 mm waste fittings, brass, chromium plated for glazed wash basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed.

S&F in repairs 450mm long PVC connections 15mm bore with PTMT nuts of length complete all as specified and as directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and as directed.

Supply and fix in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed.

S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&Fin repair Wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and as directed.

S & F in repairs CP 15mm bore angle valve with wall flange complete all as specified and as directed.

Supply and fix in repairs 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls or in floors including clamps all as specified and directed.

Supply and fix in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls or in floors including clamps all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) bends with access door any radius complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix in repairs 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed

S & F in repairs 100mm dia grating of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

M & L for point wiring using 1100 Volt grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / concealed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure having zinc coating, conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. (a) One light point controlled by one switch, with cables 1.5 mm² size

All as per item no. 79 for One 6 A socket outlet, independent, with cables 1.5 mm² size

Supply and fix Switch Piano,flush type 6 Amp single pole,oneway conforming to IS-3854 complete all as speciifed and as directed

Supply and fix outlet socket 3 pin 6 amp fllush type compelete all as specified and directed.

M&L of Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for concealed phase & neutral drawn through PVC conduit with new modular boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified.

Supply and fix outlet socket 3 pin 16 amp fllush type compelete all as specified and directed.

Supply and fix Switch Piano,flush type 16 Amp single pole,oneway conforming to IS-3854 complete all as speciifed and as directed

Supply and fix of Lamp holder, insulated body, cord grip pattern SP 230 volt, including taking down complete all as specified and as directed.

S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F single pole & neutral, modular type, double door, metallic distribution board 4 way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 200 A busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F single pole & neutral, modular type, double door, metallic distribution board 8 way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 200 A busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F triple pole & neutral, modular type, double door, metallic distribution board, 4 way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP RCCB / RCBO / Isolator / MCB as incomer and SP/TP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F MCB for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S&F MCCB 63 Amp 4 pole complete all as specified and directed

S&F MCB SPN 6 to 40 Ampp complete all as specified and directed

S&F SP 6- 32 A, 230 V, 50 Hz, 1P MCB ('B' curve) complete all as specified and directed

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge.

S&F in repair Recess mounting type fitting LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt (cool white), minimum system lumen efficacy not less than 80 % , CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, Surge Protection>2 KV, IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete all as specified.

Supply and fix of LED lights fitting Four feet 1x 20 Watt LED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge.

Supply and laying for earth continuity conductor or main aluminium strip of size 25 x 3 mm burried in ground, fixed to wall, any other indicated situation for loop earthing and the like upto test point on necesarry insulators and fastning screws, rawl plugs complete all as specified and directed. NOTE: - The joints of each lead strip shall be welded / brazed and the cost of brazing / welding shall deem to be included in unit rate of this item.

S & F as single pointed air termination aluminum rod, 12 mm dia and 300 mm long including 20 mm size air terminal base / ridge saddle made of gun metal with and including fixing arrangment on the ridge of RCC roof / on pole as required complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by engineer-in-charge.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 16 Sq.mm 4 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc or /getting out cable cover and stacking for reuse/ credit , trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cables after laying and stretching of Cable complete all as specified and directed.

M & L for sub class 'B' brick for covering to under ground cable laid flat transversally width equal to the lenth of the cable complete all as specified and directed.

RAJ MOHD (BID ID -3347278)

KESAR CONST CO (BID ID -3347285)

kerni electricals (BID ID -3346973)

M S BANSI LAL CONSTRUCTION CO (BID ID -3346964)