-Work of interlocking tiles on the road and side track by CC from Primary School to Street No. 08 in Ward-16 Orangshahpur Diggi

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).

Disposal of malwa from site up to 8 Km cartage distance with all comp of work.

Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4

M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work.

12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

Supply and stacking of hard stone 22.4 -53 mm gauge stone ballast i/c All comp work

Consolidation of hard stone ballast by hand rammer including opening out stacks sorting hard stone ballast into three sizes, repairing patches in existing road suface with hard stone ballast making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, hard stone ballast to be supplied to the contractor free at site.but 12cm (loose) thick coat of stone ballast excluding roller charges +all comp. work

Construction of un-reinforced, without dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-30) but when thikness of CC is less then 20 cm. (without dowel Bar)

Trimix for C.C. road etc. including hire & fuel charge of concrete floter + all completion of work.

Providing & applying concrete hardner on C.C.road surface etc. all completion of work.

Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in road/ pavement including groove cutting as per norms etc. all complete as per direction of Engineer-in-charge.

Supply of 80 mm thick ISI marked I shaped mechanicaly compressed interlocking cement concrete paver blocks manufatactered by high prussureand control vibration machine having plan dimension 200 x (160+120 mm )with minimum 5 mm thick topping of O.P. cement mixed with 25 %marble powder . The compresive strenth of concrete paver block shall not be less than 40 Mpa and 4.50 kg per no. including cost of all material labour T& P etc required for proper complition of work new item no-14 work should be done with colour tiles.

Relaying of cc interlocking tiles only labour only new (item NO 17)

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.

S/ fixing shine board at site +all comp of work