REPAIR/IMPROVEMENT OF PATH, DRAIN, FENCING ETC ALONG BS MARG AND NEHRU RD AREA OF AGE B/R-I UNDER GE (EAST) LUCKNOW

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation fillings & mass concrete complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub-base complete all as specified & directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in posts, sub-base etc complete all as specified & directed.

Removal of demolished material exc 250m and not exc 500m depositing where directed at level not exc 1.5 mtrs above the starting point complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc, laid, bedded and pointed, in any mortar complete all as specified & directed.

S&F for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand cushion complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed.

M&L for cheqered rubber mouled cement concrete tiles 20cm x 20cmx 25mm thick with grey cement and pigment, set,jointed and laid over 20mm thich sreed bed in CM 1:6, jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor laid in alternate panels finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5),including making drainage opening wherever required complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise (surface area exc. 150 Sqcm but not exc. 500 Sqcm), complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F galvanised 2 strand,steel Brbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts,securing and tying at crossings with and provision of galvanised mild steel wire, staple or steel pins etc including taking down complete all as specified & directed.

M&L MS work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting etc and similar work confirming to Fe 290Gde E-165 complete all as specified & directed.

S&F 5mm thk Polycarbonate corrugated sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts including taking down complete all as specified & directed.

S&F coloured prepainted GALVALUME aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering cladding to wall fixed with self taping screws including taking down and necessary washers etc all as per manufacture instruction complete all as specified and directed.

Supply of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed.

Fixing of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified & directed.

M&L for preparation of previous untreated surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, side packing ,path etc finished fair and even including necessary form work complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 110mm bore , complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F concertina coil 600mm dia of approved quality fixed with clips or clamps on angles and wall etc complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying 2-3mm thick wall care putty including two coat of weather exterior emulsion (Apex) by using roller only of approved shade/tint complete all as specified and directed.

S&F of 16 to 18mm dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade -202) of flat-30mm X2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener,polishing, rubbing &including silicon treatment etc complete all as specified & directed.

M&L for rough dressed dholpur stone slab flooring bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified & directed.

M&L for preparation of old dholpur stone/kota stone surfaces of clading/flooring & applying Bees-wax polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

Demolition of reinforcement roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed.

M&L for Providing precast cement concrete1:2:4 type B-0 (using 12.50 mm graded stone aggregate) louvres and jallies, 50mm thick (measured solid), including all mould- ings and set in CM 1:4 complete all as specified and directed.

M&L for Providing precast cement concrete1:2:4 type B-0 (using 12.50 mm stone agg) post (measured solid), including all mould- ings and set in CM 1:4 complete all as specified and directed.

M&L for Providing precast cement concrete1:2:4 type B-0 (using 12.50 mm stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in CM 1:4 complete all as specified and directed.

M&L for formwork to rough finished surfaces (flat) of RCC/PCC, sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed..

M&L mild steel TMT bar 6 to10mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to securing with clipsetc completed all as specified & directed

M&L for RCC beam (nominal mix) in 1:2:4, B-1 (using 20 mm graded stone aggregate) supported on walls, columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.50cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil complete all as specified & directed.

S&F of stainless steel pipe any dia of GRDE 304 framed work such as of pipe s angle tees, flats including gusset plates etc and welding and or riveting and similar work etc complete all as specified and directed

S&F of 3mm thick ACP sheet of any colour/shade as approved and one side covered with recto-reflactive sheet&pasting computerizes size of letter of rectro reflective sheet notexc 30cm in height incl stop commas,short line dashes, hyphens brackets etc as directed and pasted with approved adhesive as in sign bound cut to size and fixed to stainless steel frame including all necessary fittings arrangement complete all as specified and directed .(Note:- Not extra paid for Writing).

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified & directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified & directed.

M&L for preparing bituminous surfaces of road and marking 2mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repair modular type speed braker /Rumbler made of sturdy plastic (ABS) material of size 250x350x50mm fixed in position with screw and adhesive etc complete all as specified and directed.

S&F in repair road safety convex mirror made up of polycarbonate reflactive and body made of ABS/fiber /Plastic of size 800mm dia fixed over & incl 40mm bore MS pipe of 2.40m length duly powder coated embeded in PCC 1:2:4 of size 5cmx45cmx45cm and excavation arth work etc complete all as specified & directed.

M/S S S A ASSOCIATES

Gaurav Enterprises

QUALITY CONSTRUCTIONS CO

R K CONTRACTOR AND SUPPLIERS

M/s Arora Trading Co

ANIL CONSTRUCTION

M/S Reliance Construction

m/s raghubar dayal

Abode Artisan Enterprises