REPAIR/RESURFACING OF INTERNAL ROADS, INTERLOCKING PATH/HARD STANDING, BERMS AND ROAD FURNITURE IN ZONE B UNDER AGE B/R-II OF GE (E) MATHURA

M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good & including applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, well rammed and sealed with binder 9.8 Kg per 10 sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed. Note : Job mix formula of premix bituminous macadam shall be approved by GE.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud and bushes near road side etc including sweeping with brooms and finally fanning the cleaning surface free from dust and mud, sunken surfaces with gunny bags to remove all loose dirt etc existing road surfaces and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 5 Kg per 10 Sqm, over paving bituminous macadam complete all as specified and as directed.

M&L for providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.0% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled drum type hot mixing plant, laying, spreading uniformly of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed. Notes : (i) The work shall be executed as per design mix approved by GE. (ii) Paving bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Bituminous concrete shall be mixed in drum type hot mix plant, transported from plant to work at site and laid/spread by means of mechanical paver finisher. (v) Filler for bitumen concrete shall be OPC grade @ 2% of total mix. (vi) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any minus variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted as per invoice per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in this item.

Supply and fixing cat eye reflective type of metal body alloy of size 110mm x 120mm x 24mm with PAMA striplens reflector fixed with and including MS stud of suitable size as per manufacturer’s instructions including dismantling and taking out old unserviceable / broken road stud / cat eye of any type complete all as specified and as directed.

S&F Solar Stud of size 125mm x 125mm x 25mm (shank 65 mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, including dismantling and taking out old unserviceable / broken solar stud of any type complete all as specified and as directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in replacement of premium textured vulcanised rubber speed bump high resistance to abrasion and temperature of height 50mm, coloured (Black and yellow) bottom of bumps to be fitted with cement concrete 1:1.5:3 amd curved bump studded with end cap on either sides complete fixed with epoxy and construction adhesive and bolts by drilling 6-8mm x 75mm dia fasteners as per manufacturer's instructions complete all as specified and directed.

Dismantling paver block/interlocking tiles any shape and size complete all as specified and directed.

Fixing only interlocking paver block (any shape, size and thickness) material obtained from serial item No. 8.00 here-in-before as in footpath, parks, lawns, driveways or light traffic parking etc proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.

Site clearance in soft loose soil, clearing away all grass, vegetation, shrubs, brushwoods, undergrowth, roots and trees not exceeding 30cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified & directed. Note : Shape & size of paver blocks shall be as approved by the GE.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & as directed.

M&L for preparation of newly concrete surfaces of kerb stone and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Please Enable Macros to View BoQ information