SPL REP TO ROOF OF BLDG NO P-50 (MI ROOM), SPL REP TO BLDG NO P-93 (FRESH ISSUE SHED) AND SPL REP TO SECURITY FENCING AT VARIOUS PLACES AT ARTY CENTREUNDER GE NASIK ROAD CAMP

Amount

Demolition of concrete on ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified.

M&L for screed bed or bedding layer of 15mm thick for laying in CM 1:6 floor finishes complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20 mm graded stone agg) 40 mm thick in flooring complete all as specifed and directed by EIC.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light/dark shade area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for rendering 05 mm thick (1:4) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning complete all as specified and directed.

M & L for applying three coats of white wash on walls including preparation of new plastered surfaces complete all as specified and directed

M&L for complete removal of existing treatment of walls and applying two coats of OBD over one coat of chalk whitning primer complete all as specified and directed.

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling water tanks and removing from site of 1000 Ltr to 2000 Ltr Capacity

All as per item No 15 above but 500 Ltr to1000 Ltr Capacity

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified.(a) 2000 Ltr Capacity

All as per item No 17 above but 1000 Ltr Capacity

S & F ball valves, 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms).

S&F Gun-metal, globe or gate valves, 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Taking up or down tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed of 25 mm dia pipe

All as per item No 21 above but 20 mm dia

All as per item No 21 above but 15 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed (a) 25 mm dia

All as per item No 24 above but 20 mm dia

All as per item No 24 above but 15 mm dia

S & F tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed of 25mm dia

All as per item No 27 above but 20 mm dia

All as per item No 27 above but 15 mm dia

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

M & L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. ( Note : Water Proofing Compound shall be paid seperately)

Supply only intergral water proofing compound

M & L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ 1.50 kg/sqm (c) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (d) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

M & L for Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S&F Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.

S&F mild steel 10m dia and over cut to length, bent to shape requred, including cranking, bending, spirally for hooping for coumns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars.

-ditto all as per item No 40 above but 6 mm to 8 mm dia

M&L Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in Cement concrete in foundations, filling and mass concrete compete all as specified by EIC.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc Note :-(1) credit for above items should be made as per conditions separately. (2) old servicable switch / socket / regulater / switch-socket shall be taken on charge for reuse)

Taking down unserviceable / partly servicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls / floor etc to macth with existing surfaces including white washing / colour washing / distempering to match with existing wall / floor / ceiling finishes. Note :- old servicable fitting shall be reused against apropriate item

M & L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping / coduit not less than 32 mm width with MS sheet metal sunken switch / Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified for One light point controlled by one, one way switch. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

All as per item No 46 above but one ceiling /exhaust fan point controlled by one switch and regulator

All as per item No 46 above but One 3 pin 5 amp socket out point on the same board with other switches.

All as per item No 46 above but One 3 pin 5 amps socket out let point on independent board

All as per same in item No 46 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S & F Switch piano flush type single pole one way 5 amps.

S & F Socket out let 2 in one, 5/3 pin 5Amp

S & F Switch socket combination 5 Amps 5 pin flush type

S & F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S & F Ceiling rose, surface bakelite 65 x 50 mm three terminal

S & F Electronic regulator 100 / 120 Watt step type

S & F 1 x 18 Watt universal batten for T5 and T8 lamps as regal batten for LED tube. Make Havells Cat No: REGALBATTENT 8UPTO1X22WSSBSWH other than Eqvt Bajaj / CG

S & F Ultra bright glass 18W LED tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders as crystal glass LED Tubelight (Double Side Connection). Make Havells Cat No: CRYSTAL 1213T8DSTL18WLED865SGLASS other than Eqvt Bajaj / CG

S&F energy saving and environmental friendly long life 1 x 15 Watt LED street / security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07, complete all as specified Make - Havells Cat No - ENDURAPEARLSL 15WLED757SASYTOPC or eqvt in Bajaj / CG

Fabrication, supply & fixing of GI pipe bracket upto 40 mm dia 0.9 m long & 2 set of clamps made out of 30 x 5 mm MS flat and fixed with anchor bolt suitable for 1 x 15 Watt LED security light fitting.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 10,507.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Vinod Enterprises

VISHAL CONSTRUCTIONS

Alpha Construction

M/S K. K. Construction

Bidder Name

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

Vinod Enterprises

VISHAL CONSTRUCTIONS