Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹3.6 L+₹2.0 L (120.5%)Accepted-Finance | L2 | Accepted-Finance L2 |
Tender Value
₹1.7 L
Closing Date
4 Mar 2022, 4:30 pmClosed
xen rew kathua
xen rew kathua
Development of Bowli and const of Bathing Ghat near Shamshanghatat old Salalpur and dev. Of Bowli at Tupsadi const.of irrigation Nallahnear the land of Baryam Chand Third Call
2022_RDPR_162310_13
e-NIT No. 335/REW/K of 2021 Dated 26/02/2022
Open Tender
Civil Works
Item Rate
20 days
marheen
sbd
2 documents required · 2 mandatory
₹500
Yes
xen rew kathua
Exempted
12 Mar 2022
26 Feb 2022
5 Mar 2022
27 Feb 2022
4 Mar 2022
27 Feb 2022
Amount
Ea+B13:BC25rth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALLkind os soil
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Carriage
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost All works upto plinth level5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slan under 20 cm wide
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)
12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.1 40mm thick with 12.5 mm nominal size stone aggregate
Colour washing such as green blue or buff to give an even shade 13.48.1 New work (two or more coats) with a basecoat of white washing with lime
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primerUsing flats 30x6mm for diagonal braces and central cross piece.
Add cost of sign board
Sh. Gagan Sharma Contractor
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .