PROVN OF 01 STORE ROOM WITH TOILET NEAR P 45 01 X TWO WHEELER PARKING SHED NEAR CLKS LINE FLY PROOF WIRE MESHING FOR BLDG NO P 45 PL LIVING ACCN AND PATHWAY IN BLDG NO P 07 FROM QG TO MT ROAD WITH HARDSTANDING AT MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Surface excavation n. excc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..

M&L for 40 mm thick Damp proof cource in cement concrete 1:2:4 using 12.5 mm graded stone aggregate type B-0 to horizontal or vertical surface incl necessary form work concrete complete all as specified and directed. .

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M&L for hard core of broken brick gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.

M & L 100 mm PCC 1:2:4 type B2 (Using 40 mm graded stone aggregate) as in floor etc complete all as spd and directed

M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&Lfor providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed

Formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .

M & L Rendring 10mm thick in cement mortar 1:3 on concrete surfacves/chajja/ceiling, etc finished even and smooth withour using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 15 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M &L for machine cut kota stone slab 18-20mm thick as in riser of steps, skirting, dado,chamfered /nozing of edge and laid over 15 mm thick screed bed in cm 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete. (kota stone to be provided in step & skirting)

S & F steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ All as per item No 35.00 above but without glazing bars complete all as specified and directed

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping/ benching incl necessary form work complete all as specified & directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed...

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M&L 10 mm thick screed bed mixed with water proofing compound at 200ml/per bag of cement on roof surfaces/concrete surface in CM 1:4 complete all as specified as directed. Note : WPC shall be measured separately under appropriate item

M&L PCC Cement concrete 1:2:4, type B-1, (using 20mm graded stone aggregate) as in roof padding etc complete as specified and diercted.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening with fixing lugs (hold fast) etc as per specified & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as specified and diercted.

S&F 3 mm thick Figured glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exc. 0.38sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 450x300x 7mm to 350x275x7 thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

S & F Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified and directed.

S&F chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified & directed

S & F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Brass CP towel rail, 20mm dia, D type,60cm long complete all as approved complete all as specified and directed.

S&F Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F Brass chromium plated shower rose 125 mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified & directed.

S&F stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specifiedand directed.

S & F of 15 mm bore bib tap, cast copper alloy, fancy type chromium plated long body screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection 15mm dia 450mm long with CP brass nuts on both sides .

S&Fplastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour complete all as specified and directed.

Supply and laying of 16 mm CPVC Pipes SDR 11 & Plain CPVC SDR 11 fitting on walls / ceiling or laying in floors inclding union, brass elbow, brass tee, MBTA, FBTA complete all as specified and directed.

Supply and laying of 20 mm CPVC Pipes SDR 11 & Plain CPVC SDR 11 fitting on walls / ceiling or laying in floors inclding union, brass elbow, brass tee, MBTA, FBTA complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (Three layer) of capacity 1000 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed.

S&F ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed

S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

S&F PVC (SWR) bends any radius With access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 15 mm dia PVC connection 600mm long with two PTMT nuts complete all as specified and directed.

S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed.

S&F for chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F for chromium plated toilet paper holder with flap complete all as specified and directed..

S&F for plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour complete all as specified and directed.

S&F Brass chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed.

S&F powder coated anodised aluminium frame & shutters sliding or casement type for window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixing complete.

S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

M&L old size brick work with sub class 'B' bricks laid flat in floors laid in dry complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor finished even and fair Complete all as spesified and directed

M&L Chequered cement concrete tiles (pre painted coloured, glossy, rubber moulded) 20 cm x 20 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry in floors ( with grey cement and pigments) over and including Screed bed or bedding of mortar (CM 1:6) 20 mm thick for laying floor finishes complete all as specified & directed.

M&L for mild steel tubular pipe of medium grade (ISI marked) of any sizes cut to length, fixed to floor for post and wall for tubular trusses(framed), purlins, rafters etc complete all as specified and as directed.

M&L Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet with curved type 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified. complete all as specified and directed.

Excavation of post hole (or similar holes)each not exc0.50 cum in soft /loose soil ,getting out ,returing filling in and raming earth or broken ruble mixed with earth around in layers not exceeding 25 cm ,watering,and removing surpl soil to adistence n. exc50 m and making good suraface complete all as specified and directed.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) 100mm thick as in sub base etc complete all as specified and directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and directed. Make of Cable : Polycab/Havell's/Finolex and Make of PVC conduit : Plaza/Harsh/Kalinga Premium/AKG:-

All as per item No 95 but for one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No 95 but for one 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.

All as per item No 95 but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed..

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

Supply & fixing of 9 watt LED lamp complete all as specified and directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and electronic driver all accessories internally pre wired including 01 number 1x18/20 watt lamp and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed.

Supply and fixing double door SPN DBs eight way of powder coated, double door DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity 'C' series incl connection complete all as specified & directed.

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 2 core complete all as specifed and as directed.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation etc. complete all as specified and directed. Note :- Thickness of sand shall be measured 18 cm thick after punning.

M & L brick cover of old size bricks sub class 'B' with width equal to the length of the brick laid dry & abutted with each other with gap between adjacent brick n.exc 1 mm over UG cable for protection complete all as specified and directed

M/S PRAVIN ENTERPRISES

MS SHANTI AND SONS

M/S MODERN CONSTRUCTION

M/S Priya Trading Agency

jaglalchoudharyandsons

SINHA CONSTRUCTION

MS BIJAY KUMAR AND SONS