MCM/2021/Sep/27-01 Police line

Amount

-THE HORSE RIDER: Main post - 114mm, auxiliary - 60mm & 48 & 42 & 25X50mm, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

-EXERCISING BAR: Main post - 114mm, auxiliary - 42, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

-Air Walker: Providing, designing and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness U V resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters . The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.

-Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

-Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

-KNEE CHAIR: Main post - 114mm, auxiliary - 60mm & 48 & 42 & 33mm, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

-PULL CHAIR: Main post - 114mm, auxiliary - 60mm & 48 & 42 & 50X50mm, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

-Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC to full satisfaction of engineer in charge complete in all respect.

- SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX 425MMX50MM.EACH BENCH CONSIST OF 2 NO.L SHAPE BASE FOR IN GREY CEMENT COLOUR THICKNESS 80MM BACK HEIGHT 890MM FRONT HEIGHT 450MM SITTING LENGTH OF BENCH 1500MM SITTING HEIGHT 450MM TOTAL HEIGHT 890MM. The rates are inclusive of all cost and taxes like transportation cost, installation cost and GST complete in all respect.

-Air Swing: Providing, designing and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

-Arm Wheel: - Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

-SEATED CHEST PRESS: Main post - 114mm, auxiliary - 60mm & 48 & 42 & 50X50mm, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

-SIT UP BOARD: Main post - 114mm, auxiliary - 60mm & 48 & 42 & 50X50mm, Thickness pipe - 3mm, Pipe standard - GP, Paint - Powder coating only, Post caps - aluminum/LLDPE, Plastic parts - LLDPE, screws seat- stainless steel, Screws other - Nylon lock bolt, Seat - LLDPE (plastic)

[email protected]

SUPER DELUXE SPORTS INDUSTRIES