Repair of Painted Work between Km. 4.600 to Km. 7.800 of Raunahi Bund

Amount

E/W repairing of cuts ,pot hole at and top /Patri of Rudauli Bund including lead upto 30m and lift upto 1.5m with manual compaction and dressing etc. including all material ,labour and T&P for proper completion of work.

Preparation of Subgrade for PC/TC Water Bound Macadam with Crushable Screenings 1)WBM Grading 1.8(1)(A)1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading In uniform thickness, hand packing, rolling with throw wheel 80 100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the Interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification by Manual Means including all material ,labour and T&P for proper completion of work.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specfication clause 502, including all material ,labour and T&P for proper completion of work.

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specfication clause 503, including all material ,labour and T&P for proper completion of work.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat Type C as per Technical Specification Clause 508. including all material ,labour and T&P for proper completion of work.

Providing and laying seal coat by manual means with 80/100 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510, including all material ,labour and T&P for proper completion of work.

Shiv Ram Yadav (BID ID -4685209)