REPAIR/MAINT OF COOLING TOWER, CONDENSER PIPES AHUS OF CENTRAL AC PLANTS OF VARIOUS CAPACITY AND MAKE AND REPAIR OF COOLING APPLIANCES AND OTHER CONNECTED WORKS AT DRDE GWALIOR UNDER GE I RND DELHI

Amount

M&L for repair and servicing of cooling tower of cap 30 TR to 100 TR AC plant of any make and type including dismantling of cooling tower for removing of top cover and fills, replacement of unserviceable nozzle/sprinkle,replacement of rusted nuts, bolts with washers etc and cleaning bottom tank to remove mud and dust complete all as directed. Note:- the replaced parts shall be measured and paid separately as supply only.

Supply only float valve assembly complete any size.

Supply only PVC spray assembly/Nozzels complete any size.

S&F in repair of hydra for cooling tower of capacity 60 to 100 TR AC Plant by dismantling of cooling tower electric motor and disconnecting all PVC nozzels/sprinkle from hydra and replacement of as per existing nozzels/sprinkle with replacement of rusted nuts,bolts with washers etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling and taking out of old/broken unserviceable cooling tower fan blade assembly of AC plant any Capacity and supply and fixing new fan blade assembly of cooling tower of any Capacity as per existing sample complete all as specified and directed.

M&L for greasing, oiling and overhauling of induction motor of 3HP/5HP including removal of motor from site and refixing the same in position after complete work including varnishing of motor complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No. 6.00 above but 7.5 HP/10 HP.

M&L for repairing overhauling of mono block pump 03 phase 03 HP/05HP any make including replacement of bearing, shaft, seal gland, washer, bushing and alignment of shaft etc and refixing in the existing position and testing complete all as specified and directed.

All as per ser item No. 8.00 above but 7.5 HP/10 HP.

Dismantling and taking out electric motor squirrel cage induction/ monoblock pump of 3 HP/5 HP any type any make 1440 RPM 3 Phase 50 C/s AC transporting to and binding from workshop and rewinding the motor with supper enamelled copper wire as per existing gauge & nos of turns in coils complete including varnising with the best quality varnish using superior quality insulating sheets and bearing material complete, reinstallation & testing of motor complete all as specified and as directed.

All as per ser item No. 10.00 above but 7.5 HP/10 HP.

All as per ser item No. 10.00 above but 15 HP/20 HP.

All as per ser item No. 10.00 above but 30 HP/40 HP.

M&L for cleaning ,removing oil, dust & rust by using sand paper or any method on all types of steel/ metal based iron surfaces of compressor, AHU's, refrigerent & water piping , base plates, motors, AHU's cable duct, LT Panels,MS channel , make up water tank etc of any shape , size and description, with and including preparation filling cavities if any and applying one coat spray painting with synthetic enamelled paint of approved quality with and including writing E/M & MES no. making arrows/feeders name neatly on each machine complete with connected accessaries and components of 30 TR to 60 TR Capacity AC Plant complete all as specified and directed. Note :- The components and accessories shall be painted according to colour code specified as per IS instruction and as directed.

M&L for dismantling/opening air filter, nut bolts, tray for AHU including cleaning of cooling coil complete with coil cleaner solution and high pressure water of any capacity AHU including rectified leackage of refrigerant and making complete cooling coil in functioning condition and refixing same air filter, nut bolts, tray complete all as specified and directed.

Supply and laying in repair in trenches/wall GI tube 20 mm dia medium grade including all required fittings complete all as specified & directed.

All as per ser item No. 16.00 above but 25mm.

supply and fixing in repair in position 100 mm dia new butterfly valves flanged type having cast iron body with nitrile rubber sheet and confriming to PN- 10 of IS 780 complete all as specified and directed.

All as per ser item No. 18.00 above but 80mm dia.

All as per ser item No. 18.00 above but 65mm dia.

supply and fixing in repair of gun metal globe/gate valve 20 mm dia with iron wheel both end screwes ISI marked complete all as specified and as directed.

All as per ser item No. 21.00 above but 25mm dia.

M&L for MS steel work (structure) as in cross arms, breacings,suports,clamps and back plates,etc. fabricated from MS channel or angle sections or structural steel sections of required size and shape including nuts,bolts,washer,welding,bending cold or hot,drilled holes for bolts, in any shape or size as directed and including painting with one primer coat of red oxide zinc chromate primer ,one under coat & one finishing coat of synthetic enamel paint,complete,all as specified and as directed.

Disconnecting and removing existing unserviceable interlocking wiring and connection of electric control panels of any description and in any position after thorough checking and inspection at site and material & labour for repair of electric control panel and its interconnected system with using PVC insulated, unsheathed multistranded copper conductor cable, single core 1.5 Sqmm size 1100 Volts grade for making functional control of the compressor,chilled water pump,condenser water pump, AHU , cooling tower fan, LP/HP/Differential coil ,pressure switch ,solenoid valve,capacity control valve, thermostat, humidistate, heater, auxilliary contactor, push buttons, indicators, Ammeter,Voltmeter complete as required at site for functioning of Central AC plant, DX type/chilled water type,all as specified and directed. Note:- (i) Work shall be executive at site by proper skilled, experience workers. (ii) The complete panel shall be checked and tested on full load after necessary repairs and replacement of unserviceable parts for its smooth funtioning and proper interlocking including tripping on single phase.

Disconnecting unserviceable contactor supply, fixing and testing power contactor 4 pole power contactor with auxiliary contacts 2 No+2NC having AC 3 rating 25 Amps, 415 Volts NHD series of BCH with coil voltage 220/240 Volts complete all as specified and directed.

All as per ser item No. 25.00 above but 40 Amps.

Disconnecting unserviceable contactor and supply,fixing and testing of three pole power contactor AC -3 citation type capacity 70 Amp 415 Volts type ML 10 EN 22 coil voltage 230 with 1 NO + 1 NC complete all as specified specified and as directed.

Disconnecting unserviceable contactor and supply,fixing and testing power contactor 3 pole power contactor ML-1.5/2 current rating capacity of 25 Amps with auxiliary contacts 2 No+2NC having AC coil of 240 Volts complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing power contactor 3 pole power contactor ML-3/4 current rating capacity of 25 Amps with auxiliary contacts 2 No+2NC having AC coil of 240 Volts complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing power contactor 4 pole power contactor with auxiliary contacts 1 No+1NC having rating 16 Amps, 415 Volts MNX 16 series of L&T with coil voltage 220/240 Volts complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing contactor of type MNX 25 with auxiliary contacts 2 No+2NC having current rating AC3 25 Amps complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing contactor of type MNX 32 with auxiliary contacts 2 No+2NC having current rating AC3 32 Amps complete all as specified and directed.

Supply,fixing & testing Bimetal thermal over load relay various ranges starting from 3 Amps to 15 Amps, 220 Volts incl taking down old unserviceable relay complete all as specified and directed.

Supply,fixing & testing thermal over load relay with alarm contact various ranges starting from 6 Amps to 10 Amps, 220 Volts incl taking down old unserviceable relay complete all as specified and directed.

Supply,fixing & testing thermal over load relay with alarm contact various ranges starting from 10 Amps to 16 Amps, 220 Volts incl taking down old unserviceable relay complete all as specified and directed.

Supply,fixing & testing single phase preventor VSP2/VSP1 having auxiliary supply 415 Volts Bimetal thermal over load relay various ranges starting from 3 Amps to 15 Amps incl taking down old unserviceable the same complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing contactor of MN 65 type,three pole power contactor without auxiliary contacts for AC circuit with AC coil ,Volt 220/230 grade, 50 Hz having current rating (AC3) of 65 Amps, Complete all as specified and directed.

Disconnecting unserviceable contactor and supply,fixing and testing contactor of MN X 70 type,three pole power contactor without auxiliary contacts for AC circuit with AC coil, Volt 220/230 grade, 50 Hz having current rating(Ac3) of 70 Amps, Complete as directed and specified.

S&F in repair of Power air break contactor complate all as specified and directed.

S&F in repair Electronic Timer -3RP, complate all as specified and directed.

S&F in repair thermal over load relay TA25 DU complete all as specified and directed.

S&F in repair of contactor A9-30-10 , 3 pole , 415 V, 50 Hz complete all as specified and directed.

Disconnecting,dismantaling & taking out old existing unserviceable/burnt inter connection wire from the control panel of any description & in any postion and supply,fixing,testing new PVC insulated multistranded FRLS copper wire 10 Sqmm single core suitable upto 1100 Volts with all fixing materials required at site complete as specified and as directed.

S&F in repair CT,s of ratio 250/5 Amps 5 VA , 50 Hz complete all as specified and directed.

S&F in repair MCCB 400 Amps 35 KA ,4 pole 50 Hz complete all as specified and as directed.

S&F in repair MCCB 250 Amps 35 KA ,4 pole 50 Hz complete all as specified and as directed.

S&F in repair MCCB 200 Amps 35 KA ,4 pole 50 Hz complete all as specified and as directed.

S&F in repair of MCB TP 32 Amps, AC, 'C' series, 50 Hz complete all as specified and as directed.

All as per ser item No. 48.00 above but TP 40 Amps.

All as per ser item No. 48.00 above but TP 63 Amps.

All as per ser item No. 48.00 above but TPN 40 Amps.

All as per ser item No. 48.00 above but TPN 63 Amps.

S&f in repair of HRC fuse link bottle/cylendrical type 02 Amps, 415 V, 50 Hz, 80 KA asper sample complete all as specified and directed.

S&f in repair of Microprocessor controller based operating control board DX VLRP , Model VLRP single, Type Delux, range 6/6/4 AUX supply 8 V & 12 V complete all as specified and as directed.

S&f in repair of Microprocessor controller based operating control board , Model No.- 44TRSCROLLB3A, Type - Delux, range- 17/5/2, supply - 15 VAC complete all as specified and as directed.

M&L for taking down defective voltmeter digital type and replace with new voltmeter as per sample complete as specified and directed.

M&L for taking down defective ameter digital type and replace with new ammeter as per sample complete as specified and directed.

Disconnecting of ‘V’ Belts from motors & supply & fixing new ‘V’ Belts of off sizes complete all as specified and as directed.

M&L for taking down defective indication lamps and replace with new LED pilot lamps complete all as specified and as directed .

M&L for taking down defective push button and replace with new push button complete all as specified and as directed .

M&L for taking down defective one way/two way tongle switch and replace with new one way/two way tongle switch complete all as specified and as directed .

S&F in repair of air micro V filters nylon fabric washable 610 x 610 x 300 mm ,5 micron capacity at 98 % efficiency all as per existing at site and directed by Engineer-in-Charge.

S&F in repair of pre filters synthetic washable 610 x 610 x 46 mm, 5 micron capacity at 98 % efficiency all as per existing at site and directed.

S&F in repair of PVC fins suitable for any capacity and any make Cooling tower of AC plants of 2X1X0.6 feet having LPS fills with tie rod and turn buckle of suitable size to match the system as directed.

M&L for overhauling of Package type air conditioning out door unit any capacity installed at any location at ground floor/1st floor by means of removing dust by blower,washing and cleaning of condensing and cooling coil with suitable chemical,checking connection of all components including oiling and greasing all as specified and directed.

M&L for Inspection,servicing ,checking by authorised Representative of Blue Star/ Voltas Company of all connections of control wiring of microprocessor based AC compressors and compressor panel ,testing and calibration of compressor through panel for loading and unloading test on required set temprature (as specified by the user) of the compressor and some other priodical tests required of the plant as per manufacturer's guideline for smooth functioning of plant and submit the test report and their recommendation/suggetions for better performance of Plants on their standard formate complete all as specified and directed.

S&F in repair of Suction gague , range 0-500 as per sample complete all as specified and directed.

S&F in repair of Discharge gague , range 0-300 as per sample complete all as specified and directed.

S&F in repair of thermostatic expansion valve suitable for 5.5 TR cap. Scroll Compressor of Package type AC (16.5 TR) complete all as specified and directed.

S&F in repair of thermostatic expansion valve type MVE -34 -CP 100 suitable for 60 TR capacity AC Plant complete all as specified and directed.

S&F in repair of thermostatic expansion valve type TGEZ 15 TR, 53 KW suitable for 100 TR capacity complete all as specified and directed.

S&F in repair of solenoid valve 1/4" with strainer 3 way Model T-180 with drier complete all as specified and as directed.

S&F in repair of solenoid valve 1/4" with strainer 3 way Model APS-1 with drier complete all as specified and as directed.

S&F in repair of Chilled water temperature sensor for Voltas make 50 TR chiller unit complete all as specified and directed.

Material and labour for descaling and cleaning of condenser 100 TR(2X50)TR+1X50TR standby (Animal house) of Central AC Plants shell/ tube type water cooled DX type or chilled water type by carefully opening of condensers covers, cleaning of copper tubes with descaling Chemical suggested by manufacturer of Chiller machine using of descaling pump, nylon bristles brushes of suitable sizes carefully without damaging tubes, removing scale, foreign matter and cleaning with water complete including replacement of oil, worn out/demaged parts, line gaskets, nuts, bolts, studs etc complete all as specified and directed.

Material and labour for descaling and cleaning of condenser 60 TR(2X30)TR+1X30TR standby (Vertox) of Central AC Plants shell/ tube type water cooled DX type or chilled water type by carefully opening of condensers covers, cleaning of copper tubes with descaling Chemical suggested by manufacturer of Chiller machine using of descaling pump, nylon bristles brushes of suitable sizes carefully without damaging tubes, removing scale, foreign matter and cleaning with water complete including replacement of oil, worn out/demaged parts, line gaskets, nuts, bolts, studs etc complete all as specified and directed.

M&L for descaling of choked condenser pipe/ water circulating pipes 30 TRx(2X15) standby (Toxcology) (condenser to cooling tower ) including descaling and cleaning tower withdescaling Chemical suggested by manufacturer of Chiller machine and water in cooling tower for removing complete scale including cooling tower basin etc with help of steel wire brushes and draining out complete solution and filling of fresh water for checking leakage in pipes including replacing flange packing, nut,bolts etc all as spacified and directed.

M&L for descaling of choked condenser pipe/ water circulating pipes 30 TR(3X10) standby (Bio chemistry) (condenser to cooling tower ) including descaling and cleaning tower with descaling Chemical suggested by manufacturer of Chiller machine and water in cooling tower for removing complete scale including cooling tower basin etc with help of steel wire brushes and draining out complete solution and filling of fresh water for checking leckage in pipes including replacing flange packing, nut,bolts etc all as spacified and directed.

Labour charges for water flow switches pipe connection, calibration of control panels and safety device of water cooled scroll chiller make Voltas & their setting including checking of all control wiring of chiller complete all as specified and directed. Note for ser item No. 76 to 80: The work will be carried out by VOLTAS LTD and their Authrised regional dealer.

S&F in repair of filter drier EK-083 type 5.5 TR cap. Scroll Compressor of Package type AC (16.5 TR) complete all as specified and directed.

S&F in repair of operating display unit of Package type AC as per existing sample Blue star Make Ser No. 819-e-PKG-3403 complete all as specified and directed.

S&F in repair of PCB of Package type AC Blue star make complete all as specified and directed.

S&F in repair of sealed unit scroll compressor of 5.5 TR model No. ZR72KC-TFD-451 including charging of gas complete after taking down defective compressor from enclosure and making connection/jointing suction/discharge pipe for Package type AC 16.5 Ton capacity (16.5 TR unit consisting of 03 X 5.5 TR cap . Compressors) complete all as specified and as directed.

S&F in repair of sealed unit scroll compressor of 12.5 TR model No. SZ185S4RC, 380-400 V, 50 Hz including charging of gas complete after taking down defective compressor from enclosure and making connection/jointing suction/discharge pipe for 100 Ton capacity AC Plant{50 TR x 03( 01 unit run stand by), 01 unit consisting of 04 X 12.5 TR cap . Compressors} complete all as specified and as directed.

M&L for charging of refrigerent gas(R-22) in compressors of air conditioning plant including testing by standing desired pressure complete all as as specified and directed.

M&L for charging of refrigerent gas(R-407C) in compressors of air conditioning plant including testing by standing desired pressure complete all as as specified and directed.

Disconnection from system strip opening of refrigerant compressors completely and checking of various components with precision instruments to assess the requirements of repair/replacement, making inventories of repairs required and Re-assembling the dismantled Compressor with re-fixing the serviceable parts in position after proper cleaning and lubricating etc. replacement of the unserviceable/defective parts with new parts as required at site connecting the compressor and making perfectly leak proof after cleaning the oil pump. oil pump connecting rod, piston liner etc including testing the compressor on full load 30 TR for Model 5046 S, 30 TR of VOLTAS Make compressors complete all as specified and directed Note for ser item No. 88:- Spare parts required for replacement shall be measured and paid in respective item of BoQ as supply only under item No. 90 to 109.

Taking out old unserviceable crank shaft & repair by cutting and grinding the crank shaft to make it as per manufacturer's standard size shaft smoothening/fine finishing to match with half section big end bearings cleaning oil parts for proper lubrication for 5046 S model of VOLTAS Make compressors complete all as specified and directed.

Supply only piston with pin for voltas make compressors 30 TR Model 5046 S as specified and directed.

Supply only shaft seal assembly complete without `O' ring for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only connecting rod for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Oil pressure regulating valve for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Loading/unloading mechanism complete with rocker arm rocker, rocker pin Bearing caps spring locking washer etc. for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Bush with piston Pin for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only main bearing of suitable size for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Cylinder line assembly (including loading pins 7 springs) for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only discharge valve assembly (including loading pins 7 springs) for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Half section Bearing of suitable size (Set to two) discharge valve assembly for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Oil scrapper ring for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Piston ring set (set of two ) for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only `O' ring set complete for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Oil filter assembly complete with filter mesh housing gasket nut bolts etc. for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Suction strainer for voltas make compressors 30 TR Model 5046 S as specified and directed by Eng-in-Charge .

Supply only Gasket set complete for Model 5046 S for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Oil pump assembly complete for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Crank case heating assembly for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge.

Supply only Crank case heating element for voltas make compressors 30 TR Model 5046 S as specified and directed by Engineer-in-Charge .

Supply only Suction/Discharge Valve Complete for voltas make compressors 30 TR Model 5046 S complete all as specified and directed by Engineer-in-Charge.

M&L for draining out old unserviciable compressor oil from different type of compressors and charging of new compressor oil in AC plants installed at different location as directed.

S&F in repair of Pressure transduser (sensor) for suction Model M 6186-10198P -018 BG suitable for voltas make compressors complete all as specified and directed

S&F in repair of Pressure transduser (sensor) for discharge Model M 6186-10198P -018 BG suitable for voltas make compressors complete all as specified and directed

S&F in repair of Presher transduser (sensor) for oil pressure Model M 6186-10198P -018 BG suitable for voltas make compressors complete all as specified and directed

Supply only MVPD (main voltage power device) Model- EC Range 5-30 AMPS , AUX Supply 230 V AC Special 5 sec curve MPD complete all as specified and directed

Supply only µ-MPD, Model- M3PD, Range 5-30 AMPS , AUX Supply 15 V AC Special 5 sec curve complete all as specified and directed

Supply only Microprocessor controller based operating control board , Model No.- 44TRSCROLLB3A, Type - Delux, range- 17/5/2, supply - 15 VAC complete all as specified and directed

M&L for cleaning ,removing oil, dust & rust by using sand paper or any method on all types of steel/ metal based iron surfaces of compressor, AHU's, refrigerent & water piping , base plates, motors, AHU's cable duct, LT Panels,hot water generator, MS channel , make up water tank, fire post etc of any shape , size and description, with and including preparation filling cavities if any and applying one coat spray painting with synthetic enamelled paint of approved quality with and including writing E/M & MES no. making arrows/feeders name neatly on each machine complete with connected accessaries and components of 100 TR Capacity AC Plant complete all as specified and as directed.

S&F in repair Air punch safety valve for hot water generator.

S&F in repair strip heating element of capacity 3000 Watt complete all as specified and as directed.

S&F in repair of strip heating element of capacity 2500 Watt complete all as specified and as directed.

S&F in repair of immersion heater 17 KW capacity for hot water generator as per sample 3 phase, 415 Volt, 50Hz complete all as specified and as directed.

Supply, installation, testing and commissioning of HDPE make up tank of size 5000 Ltr. complete with air vent and drain connection & overflow, make up connection with float valve & foundation etc. including disconnecting & taking down old unserviceable complete all as specified and as directed.

Dismantling and taking out old rusted unserviceable condenser/chilled water pipes and Supply, fixing , testing and commissioning of new condenser / chilled water pipes of MS class 'C' of sizes 65 mm dia and material along with necessary clamps, vibration isolators and fittings such as bends,tees etc but excluding strainer and gauges etc adequately supported on rigid supports/buried in ground including excavation & return filling etc as per specifications and as required complete all as specified & as directed.

All as per ser item No. 123.00 above but 80 mm dia.

All as per ser item No. 123.00 above but 100 mm dia.

S&F in repair of Splash cap.

Disconnection from system strip opening of refrigerant compressors completely and checking of various components with precision instruments to assess the requirements of repair/replacement, making inventories of repairs required and Re-assembling the dismantled Compressor with re-fixing the serviceable parts in position after proper cleaning and lubricating etc. replacement of the unserviceable/defective parts with new parts as required at site connecting the compressor and making perfectly leak proof after cleaning the oil pump. oil pump connecting rod, piston liner etc including testing the compressor on full load including painting the compressor with applying one coat of synthetic enameled paint after preparation of the surfaces and writing MES No's & other details in the pattern and style as approved complete for Model SMC 6-65 ACCEL make compressor complete all as specified and directed. Note for item serial No 127.00:- Spare parts required for replacement shall be measured and paid in respective item of BoQ as supply only under item No. 129 to 158.

Taking out old unserviceable crank shaft & repair by cutting and grinding the crank shaft to make it manufacturer's standard size shaft smoothening/fine finishing to match with half section big and bearings cleaning oil parts for proper lubrication for SMC 6-65 model of ACCEL of make Compressors complete all as specified and directed.

Supply only connecting rod for model for compressor SMC 6-65 of make ACCEL complete all as specified and directed.

All as per ser item No. 129.00 above but Shaft seal assembly.

All as per ser item No. 129.00 above but main bearing of suitable size.

All as per ser item No. 129.00 above but half section Bearing of suitable size (set of Two).

All as per ser item No. 129.00 above but Cylinder liner.

All as per ser item No. 129.00 above but piston only.

All as per ser item No. 129.00 above but Oil pressure regulating valve

All as per ser item No. 129.00 above but oil pump assembly complete

All as per ser item No. 129.00 above but oil filter Assembly complete with filter mesh housing gasket nut bolts etc.

All as per ser item No. 129.00 above but piston ring.

All as per ser item No. 129.00 above but oil scraper ring.

All as per ser item No. 129.00 above but bush with piston pin.

All as per ser item No. 129.00 above but valve spring for suction discharge valve plate.

All as per ser item No. 129.00 above but discharge valve assembly.

All as per ser item No. 129.00 above but nut 8MTx6.5mm (Spl)

All as per ser item No. 129.00 above but discharge valve ring plate.

All as per ser item No. 129.00 above but discharge valve seat.

All as per ser item No. 129.00 above but discharge valve retaining plate.

All as per ser item No. 129.00 above but gasket set complete for SMC-6-65.

All as per ser item No. 129.00 above but spring for unloading ring.

All as per ser item No. 129.00 above but suction valve retaining plate.

All as per ser item No. 129.00 above but suction valve ring plate.

All as per ser item No. 129.00 above but Crank case heating assembly.

All as per ser item No. 129.00 above but crank case heating element.

All as per ser item No. 129.00 above but cank shaft standard size (SMC-6-65 ).

All as per ser item No. 129.00 above but suction strainer.

All as per ser item No. 129.00 above but safty valve.

All as per ser item No. 129.00 above but suction/Discharge valve.

Supply only `O' ring set complete for 15 TR as specified and directed.

Supply only connecting rod for compressors 15 TR Model SMC 6-65 as specified and directed.

GUPTA ENGINEERING WORKS

Ganga Enterprises

Uma engineers