Four Lanning of Road from Jhajjar Sampla Road to Jhajjar Bahadurgarh Road (ID 10320) in Jhajjar District (Pdg. Street Light only).

Amount

23.5 Copper Wiring in existing PVC / MS Conduit Pipe Surface / Recessed

23.5.6 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated copper conductor cable 1100 volts grade in existing MS / PVC conduit etc. as required

23.5.6.1 1 Run of Size 1.50 sqmm (1/1.40mm).

23.22 MCCB, Distribution Boards, MCB's, RCCB's, Change Over etc.

23.22.1 Supply and erection of moulded case circuit breakers single pole / 4 pole on existing wall /pedestal/Panel including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.

23.22.1.3 Triple Pole MCCB 16 Amp. to 100 Amp., 25 Ka

23.22.1.9 4 Pole MCCB 6 Amp. to 100 Amp., 25 Ka

23.22.5 Supply and erection of miniature circuit breaker 240/415 V in the existing distribution board including making necessary connections.

23.22.5.1 6 Amp. to 32 Amp. Single Pole

24.1 Earthing and Lightening Arrestor

24.1.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. (but without charcoal or coke and salt) as required.

24.1.2 Extra for using salt and charcoal / coke for pipe earth electrode as required.

24.1.12 Supplying and laying of 6 S.W.G. G.I. wire at 0.50 meter below ground level from earth electrode including thimbles, soldering etc. as required.

24.5 Miscellaneous Items

24.5.2 Supply and erection of mark double walled corrugated (DWC) HDPE pipe 10 Kg./Cm2, laid 0.75 Mtr. below ground level including digging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

24.5.2.3 DWC /HDPE pipe 63/50 mm outer dia / inner dia.

24.4 Street Light

24.4.8 Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts, earthing studs, Integral Cable termination arrangement 5 mm thick bakelite base plate on suitable welded MS/GI bracket 32A four way connector 2 No. 10 A Sp MCB, end cover and all accessories as supplied by the manufacturer including providing RCC foundation of M 25 grade (1 Cement:1Stone aggregate:2Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 80 Kg./Cum of concrete contents, concrete cover 50 mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specification complete in all respects and as per directions of Engineer-in-Charge

24.4.8.7 9 Mtr. Long pole with top dia 100mm and bottom dia 200mm with base plate of size 350 x 350 x 20mm.

24.8 RCC Foundations for Octagonal Poles

Providing RCC Foundation of M 25 grade (1 Cement:1 Stone aggregate:2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 80 Kg/Cum of concerete contents, concrete cover 50 mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specification complete in all respect and as per directions of Engineer-in-Charge.

24.8.7 9 Mtr. High pole

M. R. ITEMS

N.S - 1 Supply / Installation of street light fitting of Havells make ENDURA PEARL PLUSSL 90W LED or its equivalent model and specifications of Phillips/C&S Electric/SURYA make with cast aluminium body & toughened glass including the cost of all accessories as supplied by the manufacturer including the cost of all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work.

N.S - 2 Supply & Erection of double arm bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work.

N.S - 3 Supply & erection of outdoor duly factory manufactured feeder panel to operate S/L system made out of C.R.C.A. sheet 2 mm thick of App. Size ( 1100 L x 1400 H x 300 D ) mm with hot type canopy ventilation slots ( box type ) angle iron / channel iron frame of 40 mm x 40 mm x 6 mm on both sides. The panel should have double door godrej Almirah type weather proof with locking arrangement. The panel as such be made in two compartments one for space of energy meter with glass & solid wire mesh and sealing arrangements. The second compartment to accommodate the complete control system. Both the compartment is to accommodate system of set of timer, Copper Bus bar of size 400 mm x 20 mm x 3 mm duly tinned & insulated. The panel duly painted in powder coated gray shade. The main pannel door fixed with rubber gasket of superior quality to make it water proof. The panel should be fixed on 1:2:4 C.C. Block size 1300 mm x 500 mm x 250 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster having a C.C. base of size 1500 mm x 750 mm x 250 mm below ground level.

N.S - 4 Supply and erection of HDD pipe 4" dia 6mm thick ISI marked under ground trench less complete in all respect with all labour and material required to Complete the Job in all respect upto entire satisfaction of Engineer -in-Charge of the work .

N.S - 5 Dismentalling/Shifting of 9 Mtr. Octagonal Pole with Bracket and existing street light in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S - 6 S/E of underground cable loose in existing pipe or trenches complete in all respect upto the entire satisfation of Engineer-in-Charge of the work.

i) 16 Sqmm 4 Core Cable (Armd.)

ii) 25 Sqmm 3.5 Core Cable (Armd.)

N.S - 7 Supply and erection of 32/63 Amp. 3 Phase automatic time switch of L&T / Havells make alongwith contactor of required capacity of L&T make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

S.S. Enterprises