SPECIAL REPAIR TO SERVANT QUARTERS (PHASE II) AT AF STATION BAMRAULI

Amount

Providing Plain, cement concrete 1:2:4, type B1 (using 20mm graded crushed store aggregate) in copings, benching, bed block and the like including weathering, slightly rounded or chamered angles and throating, including necessary form work complete all as specified and directed.

Material and labour Brick work with sub-class 'B' bricks (old size) straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:6) complete all as specified and directed.

Taking down wooden Windows/Doors chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) including making good for fixing new frame. Note :- (i) Old shutters, frame guard bars etc shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor payment. (ii) Quoted rate shall deem to be included cost of making good jambs portion.

Taking down wooden Windows/Doors chowkats or frames exc not exc 1.5 sqm each (without taking off shutters from the frames) including making good for fixing new frame. Note :- (i) Old shutters, frame guard bars etc shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor payment. (ii) Quoted rate shall deem to be included cost of making good jambs portion.

Supply and fix Factory made prelam PVC door frame " of size 100x45mm (minimum) with a wall minimum thickness of 5 mm made out of extruded PVC sheet of density 600 kg/cum manufactured by an ISO-9000 certfied company and by joining 3 number heat bent PVC sheet section, the inside section of minimum size 90x30mm shall be made from prelam coloured PVC sheet of 5mm (minimum) thickness, the inside section will be covered by sticking two long brackets of 15 mm x15mm mild steel square tube, the two vehicle door frame made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube the vertical door frame are to be reinforced with (minimum) 40mmx20mm mild steel tube of 19 gauge (minimum) through out the frame. the door frame shall be fixed to wall using 8/100mm long mild steel screws through the frame by using and or fasterners. A minimum of 04 number of screw to be provided for each vertical member and two number for horizontal members etc. complete as per manufacturers specifications and as shown on drawing No.CWE/BAM/TD-40 Sheet No.1/3 & 2/3. Note :- Gap in between frame & wall/lintel shall be filled properly with suitable materials as per manufacturer's instruction to avoid crackes after wards. (ii) Colour & design shall be as approved by GE.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC (wood finish) ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing of MES SSR Part-II complete all as specified and directed. Note :-Frame for fixing shutter, hinges, builder hard ware shall be measured and paid for separately under repective item of this schedule.

Supply and fix 35mm thick second class hard wood (Bansum/Hollock/Sal) glazed & skeleton door shutters open rebated and prepared to receive glass/gauge etc. plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc edges of framing divided into squares with plain chamfered rounded, mitered and rebated sash bars, edges of framing The size of stiles and rails of shutter shall be maximum size specified in SSR Part I, section 8 clause 8.20 (a). Note :- (i) Quoted rates deem to be included cost of wooden beading to fix glass/wire gauge panes. (ii) Glass panes/wire gauge, builder hardware shall be measured and paid for separately at supply only.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc including teak wood beading on all edges. Note :- Thickness of beading for hinge sides shall be 25 mm and on other three edges 6mm thick. (ii) Builder hardware shall be measured and paid for separately at supply only.

Supply only Aluminium, anodised, barrel tower bolts of extruded section size 200 mm long complete all as specified and directed.

Supply only 150 mm size extruded aluminium alloy D type handle, fabricated type, anodized complete all as specified and directed.

Supply only 300 mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply only 100mm size mild steel butt hinges with mild steel medium weight cold rolled complete all as specified and directed.

Supply only 100mm size Aluminimum hinges type B-21 complete all as specified and directed.

Supply and fix in repair 25 mm dia MS curtain rod PVC coated with a pair finull and brackets fixed with 65 mm long screw with rawl plug complete all as specified and directed.

Supply and fix soft rubber beating of size 35 x 4 mm fixed with nails for door cill etc complete all as specified and directed.

Supply only Stainless steel (S-306 grade) wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in as repairs and fixed with stainless steel wire stapples to aluminium frame.

Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed.

Material and labour mild steel framed work such as grills, grating etc with ends of bars shoulded, framed guard bars and similar work conforming to Fe-290 Gde E-165 fixed to frame with screws complete all as specified and directed.

Material and labour pressed steel frames of size 125 x 60 mm and 1.25 mm rhick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified and directed.

Supply and fix steel window with side hung shutter with box type hinges, steel peg stay, lugs, steel handles, with glazing bars dovetailed or welded complete including one shop coat of red oxide primer complete all as specified and directed.

Supply and fix steel window with side hung shutter with box type hinges, steel peg stay, lugs, steel handles, with MS flates for fixing wire mesh dovetailed or welded complete including one shop coat of red oxide primer complete all as specified and directed.

Material and labour for roof treatment with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness (Each layer of 100 micron, another layer shall be laid only after complete dried of Ist layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal remittance tested as per ASTM C 1549 and ASTM C 1371 respectively). The coating should have water absorption less than 1% as per IS : 101 (P-7/Sec-1) 1989 with the ability to resist heat upto 1200 C as per IS : 101 (P-7/Sec-3) 1990 having VOC less than 1g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponder water up to 3.5 bars of pressure for 7-days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide along with water and soap solution as per IS : 101 (P-7/Sec-2) 1990. The waterproofing membrane will be laminated with 25-40 micron thick transparent Nano modified composite cross linking polymeric coating with a minimum of 40% solid content as per IS : 101 (P-8/Sec 6) 1993 and also should pass impact test as per IS : 101 (P/5/Sec-3) 1988 along with having dust and water repellent and anti grafting property passing scratch hardness test of 500 g as per IS : 101 (P//Sec-2) 1988. The polymeric coating should have a self cleaning and easy to clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc. with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS 2645-2003. The work will be done under the supervision of the Engineer-in-Charge by Graco airless machine and OEM should be an IGBC (Indian Green Building Council) member & GRIHA Council Certified. The coating thickness and the methodology of application shall strictly be as per the manufacture’s specifications and as approved by the Engineer-in-Charge. The manufacturer shall give a guarantee for the performance and durability for 10-years. Make : Dr. Fixit, Pildlite, Sika, M/S Starsshield Technoloty Pvt. Ltd.).

Material and labour 75 mm thick plain cement concrete 1:3:6 type C2, (using 40 mm graded crushed stone aggregate) as in plinth protection laid in alternate bay joints filled with bitumineous mastic complete all as specified and directed.

Material and labour 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as levelling course on existing concrete surface over a coat of cement slurry as specified in MES SSR Part I complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of cement slurry as specified in Para 13.32.7 of MES SSR Part I.

Supply and fix 450mmX350mm X 7-8 mm thick glazed ceramic coloured tiles in vertical surfaces such as skirting, dado, etc set & jointed in neat cement slurry and pointed in white or colured cement to match over & including 10 mm thick backing coat in cement and sand mortar (1:4) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of backing coat.

Supply and fix coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqmm and not exceeding 0.18 sqmm (400 X 400 ) mm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.

Supply and fix non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqmm and not exceeding 0.11 sqmm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over joint free and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.

Material and labour 20-25mm thick machine cut kota stone slab size (550x550mm) in flooring mirror polished, set and jointed in neat cement slurry, pointed with grey cement slurry mixed with pigment to match the shade of the slab complete including rubbing and mirror polishing over and including 20mm thick cement and sand mortar (1:6) bedding layer including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and cement slurry shall be applied over existing concrete surface for bonding with new one as specified in MES SSR Part-I complete all as specified and directed. Note:- (i) Quoted rate shall deem to included cost of bedding layer, cement slurry, and roughening surfaces of old concrete floor.

Dismantling, floor, hearth or wall tiling including cement mortar bedding etc including preparation of surface to received new floor finish/wall tiles and removing rubbish outside MOD land.

Material and labour 5 mm thick rendering in cement and sand mortar (1:3) on fair faces of brick work or concrete surfaces on ceiling finished even and fair complete all as specified and directed.

Material and labour 15 mm thick rendering in cement and sand mortar (1:6) on fair faces of brick work surfaces finished even and fair complete all as specified and directed.

Material and labour 15 mm thick rendering in cement and sand mortar (1:4) on fair faces of brick work surfaces finished even and fair complete all as specified and directed.

Material and labour 15 mm thick rendering in cement and sand mortar (1:4) on other than fair faces of brick work surfaces finished even and fair complete all as specified and directed.

Taking down cement plaster on brick walls, etc, including raking out joints, hacking for key, scrubbing down with water etc & prepare surface to receive new plaster complete all as specified and directed.

Material and labour preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. Note :- Quoted rated deemed to includ the cost for removing of splashes at floor, electrical fittings / fixture etc

Material and labour preparing old plastered or un plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. Note :- Quoted rated deemed to includ the cost for removing of splashes at floor, electrical fittings / fixture etc

Material and labour preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying two coat cement base paint white or tinted complete all as specified and directed. Note :- Quoted rated deemed to includ the cost for removing of splashes at floor, electrical fittings / fixture etc

Material and labour preparing new plastered surfaces of wall and applying two coat of cement base paint over over a coat of primer complete all as specified and directed. Note :- Quoted rated deemed to includ the cost for removing of splashes at floor, electrical fittings / fixture etc

Material and labour preparing new / old plastered surfaces of wall and applying two coat of oil emulsion distemper over over a coat of primer complete all as specified and directed. Note :- Quoted rated deemed to includ the cost for removing of splashes at floor, electrical fittings / fixture etc

Material and labour complete removal of existing treatment from old wall surfaces and applying a coat of 1 mm thick wall care putty complete all as specified and directed.

Supply and fix 3mm thick sheet glass, ordinary quality in square not exceeding 0.5 square metre each pane complete all as specified and directed.

Material and labour preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix 15mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings or laid in floors etc and testing. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.

Supply and fix 20mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings etc and testing. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.

Taking down 15mm bore GI tubing and connection fixture etc from wall complete. Note :- Old retrived pipes, fittings, taps, valve etc shall be contractor property and necessary amount as schedule of credit shall be deducted from the contractor due payment.

Taking down 20mm bore GI tubing and connection fixture etc from wall complete. Note :- Old retrieved pipes, fittings, taps, valve etc shall be contractor property and necessary amount as schedule of credit shall be deducted from the contractor due payment.

Dismantling PVC water storage tank of capacity exceeding 500 ltr and not exceedng 1000 litre and removing to store etc complete all as specified and directed.

Supply, hoisting and fixing rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered, 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection including ball brass valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20mm dia polythene floated fly nut, tank nipple, 2 Nos 20mm dia union, wash out pipe etc complete all as specified and directed.

Supply and fix in repair PVC (SWR) multi floor / nanhi trap, 75mm outlet dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed.and bedded in PCC 1:2:4 type B-1 complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor or fixed to wall. Note :- (i) Fitting such as bend, tee and cowl shall be measured and paid for separtely as supply only. (ii) Excavation and earth work shall be measured as paid for separately under respective item of this schedule.

Supply and fix 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor or fixed to wall. Note :- (i) Fitting such as bend, tee and cowl shall be measured and paid for separtely as supply only. (ii) Excavation and earth work shall be measured as paid for separately under respective item of this schedule.

Supply and fix PVC (SWR) bends 110 mm dia, of any radius without access door complete all as specified and directed.

Supply and fix PVC (SWR) bends 75 mm dia, of any radius without access door complete all as specified and directed.

Supply and fix in repairs Bib tap with wall flange, fancy type, chromium plated, brass, screwd for 15mm bore iron pipe with capstain head complete all as specified and directed.

Supply and fix 15mm bore stop valve cast copper alloy, fancy type, with long shank and cup (concealed type) chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends (externally threaded) for iron pipe or for unions and fixed.

Supply and fix in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin (white), flat back of minimum size 550mm x 400mm with and including a pair of cast iron brackets embedded in PCC (1:3:6) type C1 blocks of size 10x 7.5x15cm, 32 mm dia PVC waste pipe of suitable length, 32mm bore chromium plated brass waste fitting, PVC braided connection, CP coupling, pillar tap CP long neck, CP angular valve with flange, (for 15 mm bore pipe) CP bottle trap etc complete all as specified in particular specifications.

Supply and fix in repair Vitreous china squatting pan (Orissa pattern) water closed (white) of minimum size 580x440mm with integral foot rests, cast iron 'P' or 'S' trap, connection to trap and flushing pipe, antisyphonage pipe etc with and includng provision of PCC (1:5:10) type E2 in filling, PVC low level flushing cistern of 10 liter capacity, 32mm dia PVC flush pipe connected to water closet with inlet, PVC braided connection and angular stop cock (valve) with flange etc complete all as specified in particular specifications.

Supply and fix in repairs PVC braided connection 600mm long with two numbers check nut washers etc complete all as specified and directed.

Supply and fix in repair 600mmx450mm and 6mm thick bevelled edge looking mirror mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete all as specified and directed.

Taking down carefully existing aluminium/copper batten concealed point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed.. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fitting and fixture as directed and deposited in MES store yard of GE (AF) Bamrauli. Receipt shall be obtained before claiming the payment of new fittings. (ii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iii) Old unserviceable wiring fittings, fixture, etc other than light fittings shall be contractor's property and necessary amount as per schedule of credit from contractor due payment. (iv) Quoted rate shall be deemed to include the cost of cutting chasses for taking out concealed conduit and nitch for terminal box.

Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed multistranded copper conductor FRLS Cables as earth wire connected to earth dolly incl metal junction box, grid plate and base plate suitable for switches, sockets and switch for one light point /fan point/exhaust fan / calling bell controlled by one switch. Note : (i) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (ii) Switches, sockets, etc shall be measured and paid for separately.

Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed copper conductor earth wire connected to earth dolly suitable for bell push for one bell/buzzer point controlled by one switch on independent board. Note :-(i) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (ii) Switches, sockets, etc shall be measured and paid for separately under respective item of this schedule.

Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed copper conductor earth wire connected to earth dolly including metal junction box, grid plate and base plate suitable for 3 pin 5 Amp sockets for one sockets outlet on same board controller by one switch complete all as specified and directed. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscreasing of the service fitting and fixture as directed and kept in safe custody for refixing i.e like fans, regulator, geysers, light fitting, DBs etc if not specified in this item of schedule. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (v) Switches, sockets, etc shall be measured and paid for separately.

Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 2.5 sqm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 2.5 sqmm unsheathed copper conductor earth wire connected to earth dolly including metal junction box, grid plate and base plate suitable for modular switch, socket for one sockets outlet on independent board controller by one switch 15/16 Amps complete all as specified and directed. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscreasing of the service fitting and fixture as directed and kept in safe custody for refixing i.e like fans, regulator, geysers, light fitting, DBs etc if not specified in this item of schedule. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (v) Switches, sockets, etc shall be measured and paid for separately.

Supply and fix Switch piano flush 6 A single pole one way (one module) complete all as specified and directed.

Supply and fix Ceiling rose, surface bakelite, 60 x 25, mm three terminals complete all as specified and directed.

Supply and fix socket 2 in 1, 6/16 Amp, 3 pin combined flush type (two module) complete all as specified and directed.

Supply and fix socket out let 6 Amp, 2 in 1, 2/3 Pin flush type ( two module) complete all as specified and directed.

Supply and fix Switch piano flush, 15/16 Amp, single pole, one way complete all as specified and directed.

Supply and fix steped type electronic fan regulator modular type and connecting up. regulator shall be of make as specified in appendix 'B' to particular specifications complete all as specified and directed.

Supply and fix in replacement lamp holder PVC/polycarbonate type with back plate suitable for batten fitting including LED lamps of 9 watt complete all as specified and directed by Garrison Engineer / Engr-in-Charge.

Supply and fix factory made sheet metal enclosures distribution boards, (protection class IP-42) double door, suitable for mounting MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, tripple pole and neutral, 4 ways, 240 volts complete all as specified and directed. Note :- MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix factory made sheet metal enclosures distribution boards, (protection class IP-42) double door, suitable for mounting MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, single pole and neutral, 4 ways, 240 volts Note :- MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before..

Supply and fix MCB, Single pole and neutral, 230 volt, 32 to 40 Amp rating 10KA, C series fixed in DBs catered herein before.

Supply and fix MCB, TPN, 4 pole 415 volt, 63 Amp rating 10KA, C series fixed in DBs catered herein before.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply, fixing in and connecting wall mounted LED light fitting 1 x 20 Watt LED (6000K/6500K) (1200/1144mm) extruded aluminium heat sink provided for efficeint heat dissipation intergrated electronic driver including necessary electric connection complete all as specified and directed.

Supply and fix LED bulb 9 watt in replacement of CFL 11/15 watt fixed in pedent older/bulk head fittings including connection complete all as specified and directed. Make :- Philips / Bajaj / CG

Supplying, laying, testing and commissioning in repair heavy duty cable with PVC insulated electric cable with stranded aluminium conductor, 1100 Volts grade, connecting both end with suitable lugs of cross sectional area 10 sqmm 3.5 core, to be fix on wall complete all as specified and directed by Garrison Engineer / Engr-in-Charge.

Supply and fix of exhaust fan steel body 300 mm sweep, heavy duty, four blade, double ball bearing 1400 RPM minimum air delivery discharge 6120 CMH suitable for SP, 230/250 volts, 50Hz, AC supply with louver shulter complete making of hole for exhaust opening, grouting nut, bolts and connecting with and including 3 run 1.5 sqmm single core, PVC insulated but unsheathed FRLS multistranded copper conductor cable from ceiling rose to fan and making good the disturbed surface with existing matching schedule of finishes complete.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Garrison Engineer / Engr-in-Charge. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level ) etc complete all as specified and directed. Note :- Rubbish shall be removed out site MOD land.

Demolition of brick masonry quions, arches, pillars etc, but excluding ashlar fackings, dressed stonewrk and precast concrete articles. Note : (i) Material retrieved under this item is contractor property and necessary amount as per schedule of credit shall be deducted from the contractor dues. (ii) Rubbish shall be removed out site MOD land.

Toshi Enterprises

gangotri enteriprises

Pleiad Complex On

M/S A M ENTERPRISES

oasis contractor builder and supplier

chauhan construction

MOHAMMAD RIZWAN CONTRACTOR