Construction of Entry Gate on NH-70 at Km. 58/400 (Gagtet) Jallandhar Hoshiarpur Gagret Amb TauniDevi Awahdevi Sarkasghat-Manali road in the State of Himachal Pradesh (SH-Providing and installation of entry/ information gate)

Amount

Earth work in excavation by manual means of foundationsos structures as per the Drawings and Specifications, including setting out, construction of shoring and bracing etc. to make the slopes stable, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per MORTH Specification clause 304 as per fifth revision including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Plain/reinforces cement concrete in open foundation complete as per drawing and technical specifications. M-15 (fifteen) grade (5.50 bags) with ordinary portland cement, using 20 mm (twenty millimetre) downstone aggregate and approved quality sand mechanically mixed vibrated and curing complete as per MoRT&H specification clause 1500,1700 and 2100 as per fifth revision including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications reinforced cement concrete grade M 25 (twenty five) (8.06 bags), using 20 mm(twenty millimetre) downstone aggregate and approved quality sand mechanically mixed vibrated and curing complete as per MoRT&H specification clause 1500,1700 and 2100 as per fifth revision including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement grade Fe-500 in foundation complete as per drawings and technical specifications as per MoRT&H specification Clauses 1600 including bending binding and placing in position complete including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Wrought iron and mild steel welded work, using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position as per drawing and design complete in all respect but excluding the cost of excavation and concrete for fixing which will be paid separately as per MoRT&H specifocation clauses 1600 including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing prepainted galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (zero point five zero millimetre) (+ 0.05 %) total coated thickness with zinc coating 120 (one hundred twenty) grams per sqm as per IS: 277, in 240 (two hundred forty) mpa steel grade, 5-7(five-seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen- eighteen) microns. Sheet should have protective guard film of 25 (twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 (twelve) metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5 x 55 mm with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per Delhi SR including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (zero point five zero millimetre) (+0.05 %) total coated thickness, Zinc coating 120 (one hundred twenty) grams per sqm as per IS: 277, in 240 (two hundred forty) mpa steel grade, 5-7(five-seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen- eighteen) microns using self drilling/ self tapping screws complete as per direction of Engineer-in-charge and as per Delhi SR including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.(Ridges plain (500 - 600mm)

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (zero point five zero millimetre) (+0.05 %) total coated thickness, Zinc coating 120 (one hundred twenty) grams per sqm as per IS: 277, in 240 (two hundred forty) mpa steel grade, 5-7(five-seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen- eighteen) microns using self drilling/ self tapping screws complete as per direction of Engineer-in-charge and as per Delhi SR including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job with in all leads and lifts of materials and other incidentials as per approved architectural drawing, design and specification as directed by the Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. Gutter (600 mm over all girth)

Providing and applying two coats of ready mix paint of approved brand and required shade on steel surface after through cleaning of surface to give an even shade as per MoRT&H specification clauses 803 including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Cast in Situ Cement Concrete M20 kerb Construction of cement concrete kerb with top and bottom width 115 mm (one hundred fifteen millimetre) and 165 mm (one hundred sixty five millimetre) respectively, 250 mm (two hundred fifty millimetre) high in M- 20 (twenty) grade plain cement concrete on M-10 (ten) grade foundation 150 mm (one hundred fifty millimetre) thick, foundation having 50 mm (fifty millimetre) projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per MoRT&H specification clauses 408 including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm (three millimetre) thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre) spaced 2 m (two metre) centre to centre, 1.8 m (one point eight metre) high, 1.1 m(one point one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre), 330 mm (three hundred thirty millimetre) long complete as per MoRT&H specification clauses 810 including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm (four millimetre) thick aluminium composite panel material consisting of 3mm (three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (zero point five millimetre) thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge and as per Delhi SR. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 1mm (one millimetre) thick M.S. sheet door with frame of 40x40x6 mm (forty into forty into six millimetre) angle iron and 3 mm (three millimetre) M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm (forty into forty into six millimetre) for diagonal braces complete as per direction of Engineer-in-charge and as per Delhi SR including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing & fixing 5.5 mm (five point five millimetre) thick glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete as per direction of Engineer-in-charge and as per Delhi SR including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-charge. Item to include all material, labour, equipment and incidental work required to execute the job including all leads, lifts and carriage of material by all modes of transportation to the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

HOSHIAR SINGH GOVT CONTRACTOR